Lynx LCB2-3 Handleiding

Lynx Fornuis LCB2-3

Lees hieronder de 📖 handleiding in het Nederlandse voor Lynx LCB2-3 (3 pagina's) in de categorie Fornuis. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/3
LCB2-3 INSTALLATION INSTRUCTIONS
TOOLS REQUIRED: 7/16 Wrench
CONTENTS OF KIT: An adjustable side burner mounting bracket
Side shelf mounting bracket with 7/16 fasteners
Decorative cover for the L27 and L36 models
The side burner support bracket comes preassembled for the L27 and L36
Lynx Grills, 7300 Flores St., Downey, CA 90242
Customer Care Ph.: 888 5969/ Fax: 562 6978/Service@lynxgrills.com -289- -299-
P/N 34912 8/14
INSTRUCTIONS FOR MODELS L36 and L27:
1. Remove the right hand side shelf and the cabinet back panel (fig. 1)
2. Mount the LCB2 -3 side burner to the supports (fig. 2)
3. If needed, any misalignment can be corrected by 1st measuring the amount of misalignment, 2nd loosening the
bracket support fasteners. 3rd raise or lower the bracket according to your measurements.
Tighten the fasteners. (fig 3)
4. Hang the side shelf removed in step 1 on the right side shelf support pins of the side burner (Fig. 6, pg. 2)
P/N 34912. 8/14
Rear View
1 2
3
INSTRUCTIONS FOR MODELS L54, L42, L30:
1. Remove the right hand side shelf. See fig.1 on page 1
2. At the rear, remove the decorative cover (1) on the left hand side of the LCB2 3 by removing the Philips head screw -
and sliding it out. This also gives access to the gas piping connections. (Fig. 2)
3. Locate the mounting bracket on the inner most bracket support (Fig 3). Remove the 7/16 fasteners holding it in
place Reinstall the mounting bracket on the rear most bracket support and secure it with the 7/16 fasteners
4. As in step 3 on page 1,correct any misalignment in the shelf
5. Move the shelf mounting bracket on the right hand side, to the outermost mounting holes using the 7/16 nuts, and
tighten. (Fig. 5)
6. Hang the side shelf removed in step 1, pg. 1 to the right side of side burner on the shelf mounting bracket pins
(Fig 6)
2
Remove the bracket from the inside
support and install it onto the outer
support
3
5
This bracket must be mounted in the outer
position
6
Once the side burner is mounted to the grill the gas con-
nections can be made. Refer to the illustrations on the
right for proper gas installation examples.
After the side burner gas connections are made it is rec-
ommended that a leak test be done on all gas line fittings.
Apply a soap and water solution to all connections and
look for bubbles to form which indicate a gas leak. If no
bubbles are present, make the electrical connections
The side burner is electrically connected to grill at the
transformer. Disconnect the transformer from the grill
and plug in the side burner as shown in the illustration
below.
Finished Dimensions

Product specificaties

Merk: Lynx
Categorie: Fornuis
Model: LCB2-3

Heb je hulp nodig?

Als je hulp nodig hebt met Lynx LCB2-3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Fornuis Lynx

Lynx

Lynx LCB2-3 Handleiding

29 Maart 2025
Lynx

Lynx Asado L30AG Handleiding

9 Februari 2024
Lynx

Lynx LFPS-C Handleiding

9 Februari 2024
Lynx

Lynx LFPC-C Handleiding

9 Februari 2024

Handleiding Fornuis

Nieuwste handleidingen voor Fornuis

AEG

AEG T27PIQ4S0 Handleiding

9 April 2025
Rangemaster

Rangemaster RMB60HPNGF Handleiding

9 April 2025
Hotpoint

Hotpoint HTX8017DCF2 Handleiding

9 April 2025
Bora

Bora Classic 2.0 CKG Handleiding

9 April 2025
Miele

Miele CSAD 1400 Handleiding

8 April 2025
Gaggenau

Gaggenau VG425115 Handleiding

7 April 2025
Bosch

Bosch PNP6B6K40 Handleiding

7 April 2025
Bosch

Bosch PGQ7B5K90 Handleiding

7 April 2025
Breville

Breville the Quick Cook Dual Zone LIC700 Handleiding

7 April 2025
Opera

Opera Fonda 800 DFO80B1 Handleiding

7 April 2025