Elba EBG-F1534(GR) Handleiding

Elba Blender EBG-F1534(GR)

Lees hieronder de 📖 handleiding in het Nederlandse voor Elba EBG-F1534(GR) (6 pagina's) in de categorie Blender. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
BLENDER
MODEL: EBG-F1534(GR)
Owner’s Manual
Please read this manual carefully
before operating your set.
Retain it for future reference.
Record model number and serial
number of the set.
See the label attached on the set
and quote this information to your
dealer when you require service.
For The Warranty Terms & Conditions, Please Refer To Warranty Certificate.
1
IMPORTANT SAFEGUARDS
Before using the appliance, basic precautions should always be followed including the
following:
1. Read all instructions before using.
2. Do not operate the appliance with damaged power cord or plug, after the
appliance malfunction, or if it is dropped or damaged in any manner. Return the
appliance to the nearest authorized dealer or after-sales service center for
examination, repair, electrical or mechanical adjustment.
3. Do not use the appliance if the plug, the mains cord or other parts are damaged.
4. Do not let the power cord hang over edge of table or counter or hot surface.
5. Do not place the appliance on or near hot gas or electric burner, or in a heated
oven.
6. Do not leave the appliance unattended while operating.
7. Do not touch the cutting edges of the blender blade unit when you clean it. They
are very sharp and you could easily cut your fingers on them.
8. Do not operate the appliance for more than 2 minutes continuously at a time. If
you have not finished processing after 2 minutes, switch off the appliance and let it
cool down before you operate it again.
9. To prevent failure of the appliance, make sure that no food or liquids enter the
connection point between the blade unit interface and the motor base.
10.Never reach into the plastic blender with your fingers or an object while the
appliance is running.
11. Never use any accessories or parts from other manufacturers or that ELBA does
not specifically recommended.
12.Oversized foods or metal utensils must not be inserted into the appliance as they
may cause fire or risk of electric shock.
13.If foods stick to the wall of the blender, switch off the appliance and unplug it. Use
a spatula to remove the foods from the wall.
14.Always make sure the jar cover is properly closed/assembled on the plastic jar
and the lid is inserted properly in the jar cover before you switch on the appliance.
15.Never immerse motor base of the blender in water or any other liquids nor
rinse it under the tap. Use only a moist cloth to clean the motor base.
16.Close supervision is necessary when your appliance is being used near children
or infirm persons.
17.Always unplug the appliance before you assemble, dissemble or make adjustment
to any of the parts.
18.Do not operate the appliance for other than its intended use.
19.Do not use this blender outdoors.
20.This appliance is for domestic use only.
21. This appliance is not intended for used by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliances by a person responsible for their safety.
22.Children should be supervised to ensure that they do not play with the appliance.
23.Save these instructions for future reference.
2
PRODUCT DESCRIPTIONS
1. Motor Base
2. Control Knob
3. Measuring Cup
4. Jar Cover
5. Plastic Jar
6. Sealing Ring(Blade Unit)
7. Blade Unit
8. Grinder
9. Grinder Unit
ASSEMBLE AND OPERATING THE APPLIANCE
1. Unpack the appliance and place it on a flat horizontal counter top. Check all the
parts whether all in good condition.
2. Clean the removable parts before using.
3. Make sure that the control knob is switched to 0 position.“ ”
4. Put the ingredients into the plastic jar.
5. Mount the measuring cup onto the jar cover. Close the plastic jar with jar cover.
6. Insert the plastic jar onto the motor base and secure it tightly.
7. Power on the appliance and select the desired level of power.
8. Always switch off the appliance by setting the control knob to 0 position before“ ”
you open the jar cover.
9. Unplug the plug from wall outlet after use.


Product specificaties

Merk: Elba
Categorie: Blender
Model: EBG-F1534(GR)

Heb je hulp nodig?

Als je hulp nodig hebt met Elba EBG-F1534(GR) stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Blender Elba

Handleiding Blender

Nieuwste handleidingen voor Blender