Edimax PS-1206P Handleiding

Edimax Printserver PS-1206P

Lees hieronder de 📖 handleiding in het Nederlandse voor Edimax PS-1206P (86 pagina's) in de categorie Printserver. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/86

User’s Manual

Version: 1.0(July, 2005)

publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or

translated into any language or computer language, in any form or by any means,

electronic, mechanical, magnetic, optic chemical, manual or otherwise, without the prior

written permission of this company.

Federal Communication Commission

Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

4. Consult the dealer or an experienced radio technician for help.

FCC Caution

This equipment must be installed and operated in accordance with provided instructions

and a minimum 20 cm spacing must be provided between computer mounted antenna and

person’s body (excluding extremities of hands, wrist and feet) during wireless modes of

operation.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Any changes or modifications not expressly approved by the party responsible for

compliance could void the authority to operate equipment.

Federal Communication Commission (FCC) Radiation Exposure Statement

This equipment complies with FCC radiation exposure set forth for an uncontrolled

environment. In order to avoid the possibility of exceeding the FCC radio frequency

exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches)

during normal operation.

The antenna(s) used for this transmitter must not be co-located or operating in conjunction

with any other antenna or transmitter.

R&TTE Compliance Statement

This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE

EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment

and telecommunication terminal Equipment and the mutual recognition of their conformity

(R&TTE)

The R&TTE Directive repeals and replaces in the directive 98/13/EEC

(Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of

April 8, 2000.

Safety

This equipment is designed with the utmost care for the safety of those who install and use

it. However, special attention must be paid to the dangers of electric shock and static

electricity when working with electrical equipment. All guidelines of this and of the

computer manufacture must therefore be allowed at all times to ensure the safe use of the

equipment.

EU Countries Intended for Use

The ETSI version of this device is intended for home and office use in Austria, Belgium,

Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, the Netherlands,

Portugal, Spain, Sweden, and the United Kingdom.

The ETSI version of this device is also authorized for use in EFTA member states: Iceland,

Liechtenstein, Norway, and Switzerland.

EU Countries Not intended for use

None.

DISCLAIMER

This company makes no representations or warranties, either expressed or implied, with

respect to the contents hereof and specifically disclaims any warranties, merchantability or

fitness for any particular purpose. Any software described in this manual is sold or

licensed "as is". Should the programs prove defective following their purchase, the buyer

(and not this company, its distributor, or its dealer) assumes the entire cost of all

necessary servicing, repair, and any incidental or consequential damages resulting from

any defect in the software. Further, this company reserves the right to revise this

publication and to make changes from time to time in the contents hereof without

obligation to notify any person of such revision or changes.

Product specificaties

Merk:	Edimax
Categorie:	Printserver
Model:	PS-1206P
Stroomvoorziening:	7.5V DC, 0.5A
Processormodel:	RISC
Aantal Ethernet LAN (RJ-45)-poorten:	1
Certificering:	FCC Class B, CE Mark
Intern geheugen:	2 MB
Flash memory:	0.5 MB
Afmetingen (B x D x H):	58 x 82 x 20 mm
Bedrijfstemperatuur (T-T):	10 - 55 °C
Netwerkconnectietype:	Ethernet LAN