Edgewater 4562T4W Handleiding

Edgewater Router 4562T4W

Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Edgewater 4562T4W (7 pagina's) in de categorie Router. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
4562 Converged
Networking Router
Quick Start Guide
Version 1.0
Page 1 of 7
200-4562-001
Before You Start
Please read this guide thoroughly as it describes the basic installation of
the device. Additional configuration needed to deploy the device in a
specific environment can be performed with the help of online help.
This guide also provides an example of a typical 4562 deployment that
can be used as a guideline for your installation.
Requirements for Installation
โ€ข A computer with a web browser such as Microsoft Internet Explorer or
Netscape Navigator or any other browser of your choice
โ€ข At least one Ethernet cable
โ€ข Following information supplied by the VoIP Service Provider
o IP address of the WAN interface
o if T1 is being used for WAN connection then:
๎šƒ T1 frame format
๎šƒ Layer 2 protocol such as PPP, Frame Relay/DLCIs, HDLC,
etc.
o IP address of the Softswitch
Page 2 of 7
Instructions
Step 1 โˆ’ Connecting the Cables
1. Connect one end of an Ethernet cable to local LAN port 4 of 4562. This port can be seen
in the area โ€œBโ€ of the above diagram. Connect the other end of the cable to your
computerโ€™s Ethernet port.
2. If T1 is used for the WAN connectivity then perform the following steps, otherwise go to
step 5.
Page 3 of 7


Product specificaties

Merk: Edgewater
Categorie: Router
Model: 4562T4W

Heb je hulp nodig?

Als je hulp nodig hebt met Edgewater 4562T4W stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Router Edgewater

Handleiding Router

Nieuwste handleidingen voor Router