Duravit Ketho KT665004949 Handleiding

Duravit Niet gecategoriseerd Ketho KT665004949

Lees hieronder de 📖 handleiding in het Nederlandse voor Duravit Ketho KT665004949 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
Ketho # KT 6650
Installation instructions
Leben im Bad
Living bathrooms
Instructions for use
The bathroom furniture range complies with the standards and guidelines applicable at the time of delivery and is designed for use in bathrooms.
Though designed for the wet environment, direct contact with water should be avoided, for example, when showering.
We reserve the right to make technical improvments and design modifications to the products illustrated.
MAL_Ketho_KT6650/16.12.1
175
850
280
80
615
565
130
55
24 1/4”
22 1/4”
33 1/2”
3 1/8”
11”
6 7/8”
5 1/8”
2 1/8”
A A B B
mm inch mm inch
600 23 5/8” 376 14 3/4”
# 034265
2x S8
2x 5x50 # 0050260000 # 034265
2x 100
4x S8
4x 5x50 # F30368# F23628
MAL_Ketho_KT6650/16.12.1
1 2 3 4
5 6 7
Reference the washbasin
specification to establish the
position of mounting bolts,
mark the holes to be drilled for
the anchors.
Using a 3/8“ and 5/8“ drill bit,
drill the anchor holes that
have been marked.
The plastic anchors provided
are for concrete wall
applications.
For wood stud walls, bolts should
be screwed into wood backing.
When mounting the washbasin
into a wood stud wall, there
must be adequate bracing. We
recommend doubling up 2 x 6’s
or 2 x 8’s between the studs to
form a solid anchoring point.
Screw mounting bolts into the
pre drilled holes with an
adjustable wrench. Screw in
the full length of the mounting
bolt, so that the lag thread is
no longer visible. Carefully slide
washbasin onto the mounting
bolts. Insert the white plastic
sleeve over bolt and into the
hole in the washbasin. Install
provided washer and nut.
Hand tighten the nut,
so the washbasin is secure.
Install the siphon.
Remove the vanity drawer. Using a screwdriver, adjust
the vanity mounting hinge
system clockwise.
8
Slide the vanity under the
washbasin.
Tighten mounting bolts with a
wrench until the washbasin
is stable.
MAL_Ketho_KT6650/16.12.1
9 10 11 12
13 14 15
Using a screwdriver adjust the
vanity mounting hinge system
counter-clockwise.
Check the leveling of vanity for
adjustment.
Screw two set screws until
desired leveling of the vanity
has been reached.
Using the appropriate bit for
the wall material, drill pilot
holes.
The plastic anchors provided
are for concrete wall
applications.
For wood stud walls, bolts should
be screwed into wood backing.
Install the faucet and siphon.
16
Install the vanity drawer.


Product specificaties

Merk: Duravit
Categorie: Niet gecategoriseerd
Model: Ketho KT665004949

Heb je hulp nodig?

Als je hulp nodig hebt met Duravit Ketho KT665004949 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Duravit

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd