Draper SmartTrim Handleiding

Draper Niet gecategoriseerd SmartTrim

Lees hieronder de 📖 handleiding in het Nederlandse voor Draper SmartTrim (7 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/7

If you have any difﬁculties installing or servicing your

SmartTrim for Barco UniSee, call your dealer or Draper, Inc.

Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385

draperinc.com | 765.987.7999 | 800.238.7999

SmartTrim™ for Barco UniSee®

INSTALLATION

INSTRUCTIONS

TRIM

FLANGE

TRIM FACE

VENTED

FLANGE

MOUNTED TO WALL:

Approx. 0.25" (6.35mm)

gap between ﬂange

and wall typical

page 2 of 7

SmartTrim for Barco UniSee

Tools Required

Important Safety Information

WARNING

Improper installation and use of SmartTrim can result in serious injury. Primarily, injuries can occur when the SmartTrim falls due to imprecise installation, mishandling of the

SmartTrim during installation or installation on an insufﬁcient structure. Please use extreme care.

1. Please read the following installation guidelines thoroughly and follow them carefully. Failure to do so may cause product to fall or otherwise fail, and could result in serious injury.

2. Installation of SmartTrim should only be performed by an authorized, qualiﬁed, and experienced professional.

3. Do not afﬁx the unit to walls that have inadequate strength to permanently hold the unit during use. It is the owner's and installer's responsibility to conﬁrm the wall to which the

unit attaches is sufﬁcient to permanently hold the weight and stress loads of the unit at all times. Draper, Inc., is not responsible for improper installation, application, testing or

workmanship related to the product at place of installation.

4. All brackets and other hardware must be installed level. Barco UniSee must be level and square.

5. Never leave the area during SmartTrim installation or maintenance unless it is secure and safe.

6. During installation or removal, carefully watch the surrounding area for any potential safety concerns including nearby persons or objects.

7. Installation of SmartTrim should be performed only by authorized and qualiﬁed personnel, who have been trained in the safe and effective installation of the SmartTrim &

understand its safety features.

8. SmartTrim may need to comply with local, state or district rules and regulations, in particular when installed in schools.

All applicable rules and regulations should be reviewed before installation and use.

9. Failure to precisely follow installation guidelines invalidates all warranties.

10. Custom products

installations may not be reﬂected in this manual. Call Draper, Inc., if you have questions about custom products or any questions about your installation.

Before Beginning Installation

1. Look for any job site conditions that could interfere with installation of the system.

2. Read carefully and be sure to understand all installation instructions and all related operations manuals. These instructions are intended to as a guide for the installer and owner.

They should be followed closely and combined with the expertise of experienced qualiﬁed installers. Draper, Inc., is not responsible for improper installation, application, testing