Dimplex RX9911 Handleiding

Dimplex Niet gecategoriseerd RX9911

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Dimplex RX9911 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 197 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/3
ξ˜ƒ
ξ˜ƒ
Contactξ˜ƒ ξ˜ƒDetails
ξ˜ƒ
Pleaseξ˜ƒnoteξ˜ƒthat some contactξ˜ƒ ξ˜ƒofξ˜ƒtheξ˜ƒ ξ˜ƒdetails onξ˜ƒ ξ˜ƒ
thisξ˜ƒPDFξ˜ƒdocumentξ˜ƒmayξ˜ƒnotξ˜ƒbeξ˜ƒ ξ˜ƒcurrent.
ξ˜ƒ
Pleaseξ˜ƒuseξ˜ƒ ξ˜ƒ ξ˜ƒthe following detailsξ˜ƒifξ˜ƒyouξ˜ƒneedξ˜ƒtoξ˜ƒ
contactξ˜ƒus:ξ˜ƒ
ξ˜ƒ
Telephone:ξ˜ƒ0844 879ξ˜ƒ ξ˜ƒ3588ξ˜ƒ
Email:ξ˜ƒcustomer.services@gdcgroup.co.ukξ˜ƒ
ξ˜ƒ
ξ˜ƒ
The wideξ˜ƒcustomer alsoξ˜ƒsupportξ˜ƒsection websiteξ˜ƒofξ˜ƒourξ˜ƒ ξ˜ƒ ξ˜ƒfeaturesξ˜ƒ ξ˜ƒaξ˜ƒ
rangeξ˜ƒof ofξ˜ƒinformationξ˜ƒwhichξ˜ƒmayξ˜ƒbeξ˜ƒ ξ˜ƒuse availableξ˜ƒtoξ˜ƒyouξ˜ƒandξ˜ƒisξ˜ƒ ξ˜ƒ
24 aξ˜ƒhoursξ˜ƒ ξ˜ƒday.ξ˜ƒItξ˜ƒincludes:ξ˜ƒ
ξ˜ƒ
β€’ Operatingξ˜ƒ ξ˜ƒ ξ˜ƒ ξ˜ƒand installation instructions
β€’ Easyξ˜ƒ ξ˜ƒ ξ˜ƒ ξ˜ƒ ξ˜ƒ ξ˜ƒ ξ˜ƒ ξ˜ƒβ€˜How to use’ guides for storage heaters
β€’ Serviceξ˜ƒ ξ˜ƒ ξ˜ƒand repairs
β€’ Whereξ˜ƒtoξ˜ƒbuyξ˜ƒourξ˜ƒproductsξ˜ƒ
β€’ Literatureξ˜ƒ ξ˜ƒdownloads
β€’ Heatingξ˜ƒ ξ˜ƒ ξ˜ƒrequirement calculator
ξ˜ƒ
ξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒ ξ˜ƒβ€ξ˜ƒVisit www.dimplex.co.uk/supportξ˜ƒ
A division of GDC Group Ltd
Millbrook House Grange Drive Hedge End Southampton SO30 2DF
www.dimplex.co.uk
Re
g
istered No: 1313016 En
g
land
VAT GB 287 1315 50004
EEE Producer Registration Number –
WEE/GE0057TS
Paper from sustainable sources
Installation and
Operating Instructions
Pilot Wire Programming Cassette - Model No. RX9911
General Description
Installation
The RX9911 can only be used in RPX, EVX and EVS heaters.
They offer either individual programming (each individual heater has a programming cassette)
or group programming from a master heater through the pilot wire. Group programming can
drive up to 20 slave heaters.
Two heating positions are offered: comfort and economy setback, with temperatures set using
the controls on the heater.
A choice of heating programmes are available for each day of the week. There are 7 pre-set
programmes, from P1 to P7 or a customised programme P=. The seven pre-set programmes
and customised programme will remain stored even if the mains supply is cut off for more
than seven hours. However, the day and time will have to be set again as the built in battery
will only operate for seven hours maximum when removed from the heater.
The RX9911 is rated at 230V.
1. Using a narrow bladed screwdriver, carefully release the cover from the slot on the
heater
2. Insert the programmer fully so that it clicks into position
3. Turn the control knob on the heater(s) to the PROG position
Individual Programming:
Fit one programmer to each RPX, EVX or EVS
heater. (NB. When the heater is installed, the black
pilot wire in the mains supply cable should be
trimmed back in accordance with the installation
instructions.
Programming for a Zone:
The heater containing the RX9911 is the Master heater and connected by the black pilot wire
to the Slave heaters. The Master heater determines the Programme and heating levels for all
the heaters (Comfort, Setback and Frost Protection), but the actual comfort and setback
temperatures should still be set on each individual heater (see heater instructions). The master
heater will switch between comfort and setback according to the programme. On every slave
heater, turn the position button to PROG.
421AA0791.B00 NR/BLA 44/00
Display
1
2
3
4
5
6
7
03 : 58
+ -/Hgel OK MODE
Comfort Hours
Setback Hours
Override - Frost Protection
4. Choice of programme
for each day
1 segment per hour
1. Time
2. Day
3. Indicator
flashes
Programmer
LEN
Programmer
Master Slave Slave
Pilot Wire Up to 20
units
LEN
- 1/2 -
T9908/010/A
Electrical Connection
Master/Slave Heaters
Operating Instructions
Setting the time:
Choosing the programmes:
Frost Protection/Holiday Setting:
Overriding the master
programme:
Problem Solving
General Cleaning
After Sales Service
Do NOT connect the BLACK (PILOT) SIGNAL WIRE to earth.
When the programmer drives other heaters, connect the pilot wire from the β€œmaster” unit to the
pilot wire of a β€œslave” heater and then from one slave heater to another (in series).
Any 240V insulated cable may be used to link pilot wires around the ring main. The signal current
is low. Suitable connections would be either an additional single core wire marked or colour
coded appropriately or use a 4 core cable throughout the heater ring.
The RX9911 can be programmed either inserted directly into the heater or out of the heater. If
choosing the latter option, the cassette must be first left in the heater for 15 minutes to charge
the battery. Remember that the battery only lasts for seven hours.
00.00 flashes
1. Press the mode button once until hour flashes
2. Alter the hours with
+
++
+ - or --
- sign and confirm OK
3. Alter the minutes with
++++ or ---- sign and confirm OK
4. Alter the days with
+
++
+ or -
--
- sign and confirm OK
The black arrow marks the selected day (e.g. 1 = Monday, 2 = Tuesday etc).
Press mode twice (once for 2 seconds and once again briefly - P1 should flash) then with the
+
or - sign scroll through the preset programme choices P1 to P7 and P=. Select the programme
for day 1 (Monday) by pressing OK. Follow this sequence for each day of the week.
To choose the customised programme select P=, press mode and change the temperature
levels for every hour of the day by pressing +
++
+ for comfort. and ---- for setback.Then, after
completing the 24 hours, confirm the day with OK.
The programmer will revert to the original display screen (time + day + ...) only after day 7 has
received a programme.
The frost protection setting is continuous during the days it is set.
To set frost protection, press and hold the -/Hgel button until β€œHG : 01” appears. If used as a
group programmer all heaters will be set to frost protection. Press
+
++
+ or -
--
- to set the number of
days required for frost protection (99 days maximum) e.g. β€œHG : 04” = 4 days. Press OK to
confirm.
After the set frost protection period has elapsed, the heater automatically returns to the original
programme.
To cancel frost protection before the end of the set period, press -/Hgel to return to the registered
programme.
When slave heaters are connected to a master, it is possible to manually override the master
programme by turning the control button on each slave heater to the required position (comfort,
setback, frost protection or off). To cancel the manual override, turn back to the PROG position.
Display flashes and the timer cannot be adjusted: Exit the existing mode by pressing OK to return
to the beginning.
Cassette has been out of the heater for more than seven hours: Return to the heater to charge
(the internal battery lasts for seven hours).
WARNING
BEFORE UNDERTAKING CLEANING WORK ON THE CONTROLLER OR APPLIANCE
IMMEDIATELY DISCONNECT THE ELECTRICITY SUPPLY EITHER BY SWITCH OFF AT THE
ADJACENT DOUBLE POLE SWITCH.
The outside of the appliance should be wiped over with a soft damp cloth and then dried. Do not
use detergents or abrasives.
Your Dimplex Control is guaranteed for one year from date of purchase. We undertake to
exchange or repair free of charge within this period, any part found to be defective.
Should you require after sales service, please get in touch with the supplier through whom you
purchased the appliance, or your nearest Service Agent.
Please do not initially return a faulty appliance or part of an appliance to us as this may result in
transit damage and/or delay in providing service. Let us know your difficulty quoting the model
number and series of the appliance. We will then take the appropriate action.
Dimplex Manor House Avenue
Millbrook
Southampton
SO15 0AW
Customer Help Line (0870) 7270 101
Product Sales (0870) 7270 103
Head Office (0870) 0777 117
421AA0791.B00 NR/BLA 44/00
- 2/2 -

Product specificaties

Merk: Dimplex
Categorie: Niet gecategoriseerd
Model: RX9911

Heb je hulp nodig?

Als je hulp nodig hebt met Dimplex RX9911 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Dimplex

Dimplex

Dimplex Optiflame 3D GLN20BR3D Handleiding

15 November 2024
Dimplex

Dimplex GDDEU30 Handleiding

26 Februari 2024
Dimplex

Dimplex ALM20E Handleiding

13 November 2023
Dimplex

Dimplex MZT20E Handleiding

1 Juli 2023
Dimplex

Dimplex MZT20BL-E Handleiding

29 Juni 2023
Dimplex

Dimplex Optiflame 3D BMR20CH3D Handleiding

27 Juni 2023
Dimplex

Dimplex Optiflame 3D BMR20AB3D Handleiding

27 Juni 2023
Dimplex

Dimplex Optiflame 3D BMR20BR3D Handleiding

25 Juni 2023
Dimplex

Dimplex Optiflame 3D GLN20CH3D Handleiding

24 Juni 2023
Dimplex

Dimplex DXTT3 Handleiding

13 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Electrolux

Electrolux STA9 Handleiding

23 November 2024
Electrolux

Electrolux UMP3 Handleiding

23 November 2024
Electrolux

Electrolux ZS70GL Handleiding

23 November 2024
Bosch

Bosch HEZ8TK36UC Handleiding

23 November 2024
Bosch

Bosch HEZ8ZZ36UC Handleiding

23 November 2024
Bosch

Bosch HDZIT301 Handleiding

23 November 2024
Bosch

Bosch HEZBS301 Handleiding

23 November 2024
LG

LG LX-330 Handleiding

23 November 2024
Stamos

Stamos S-PLASMA 60U Handleiding

23 November 2024
Bosch

Bosch KSZ2AVU00 Handleiding

22 November 2024