DeWalt DW739 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor DeWalt DW739 (24 pagina's) in de categorie Lintzaag. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/24
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES
DE USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-D WALT • www.dewalt.comE
DW723
Miter Saw Stand
Support de scie à onglets
Base para ingleteadora
English
DW723 Miter Saw Stand
12'-6" (3810 mm)
5'-6" (1480 mm)
5'-6" (1480 mm)
RELEASE BUTTON
BEAM SAW MOUNTING BRACKETS
EXTENSION ARM
WORKPIECE
SUPPORT
LENGTH
STOP
EXTENSION
ARM END CAP
EXTENSION
ARM LOCK
KNOB
RELEASE LEVERS
CARRY HANDLE
LOCKING
LOCATOR
CLIP
1
English
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR
ANY D
E
WALT TOOL, CALL US TOLL FREE AT: 1-800-4-DEWALT
(1-800-433-9258)
Miter Saw Stand with Folding Legs
DW723
This stand is designed for use with most miter saws. If you have
any problem with alignment or mounting, call 1-800-4-DEWALT
(1-800-433-9258).
WARNING: For your own safety, read the miter saw
instruction manual before using any accessory. Failure
to heed these warnings may result in personal injury and
serious damage to the miter saw and the accessory. When
servicing this tool, use only identical replacement parts.
Tools Required
1. Socket or wrench set
2. Drill with 3/8" (9.5 mm) drill bit (Not required for DEWALT Miter
Saws)
3. Phillips #2 screwdriver
General Safety Instructions for Miter
Saw Accessories
WARNING: To reduce the risk of personal injury:
• ALWAYS use eye protection. All users and bystanders must
wear eye protection that conforms to ANSI Z87.1.
• DO NOT exceed the weight this stand can hold. The main center
beam of the miter saw stand is designed to support 500 lbs.
(227 kg.) safely in a work environment. It is unsafe to climb, sit or
stand on the stand.
• Follow the mounting instructions carefully. Fasten the tool to the
saw mounting brackets securely as instructed.
• DO NOT modify or use stand for operations for which it is
unintended.
• DO NOT use the stand on uneven surfaces. The stand is
designed to be used on a flat, stable surface.
PREPARATION
Lay the miter saw stand on the floor with the
A
folded legs on top. Push the locking pin and
pull each leg up until the locking pin (A)
clicks into its detent. Lift the stand by the
center beam and place it in an upright
position. The stand should be stable and
should not rock. Check the legs to be sure
that the locking pins have engaged and the
legs are firmly held in place.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may
result in property damage.
Product specificaties
| Merk: | DeWalt |
| Categorie: | Lintzaag |
| Model: | DW739 |
Heb je hulp nodig?
Als je hulp nodig hebt met DeWalt DW739 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Lintzaag DeWalt
4 April 2022
12 April 2022
4 April 2022
3 April 2022
5 April 2022
12 April 2022
26 Juni 2021
Andere handleidingen DeWalt
15 November 2024
15 November 2024
15 November 2024
13 November 2024
13 November 2024
13 November 2024
13 November 2024
11 November 2024
9 November 2024
8 November 2024