DeWalt DCS373 Handleiding
DeWalt
Cirkelzaag
DCS373
Lees hieronder de đ handleiding in het Nederlandse voor DeWalt DCS373 (72 pagina's) in de categorie Cirkelzaag. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/72
DCS373
20V Max* 5-1/2" (140 mm) Cordless Metal-Cutting Circular Saw
Scie circulaire Ă mĂŠtaux sans fil, 140îmm (5-1/2îpo) 20îV max*
Sierra circular inalĂĄmbrica de 20îV MĂĄx* 140 mm (5-1/2îpulg.) para corte de metal
INSTRUCTION MANUAL
GUIDE DâUTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIĂN, CENTROS DE SERVICIO Y PĂLIZA DE
GARANTĂA. ADVERTENCIA: LĂASE ESTE INSTRUCTIVO ANTES DE
USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contĂĄctenos.
1-800-4-D WALT ⢠www.dewalt.comE
1
English
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable,
use a ground fault circuit interrupter (GFCI) protected
supply. Use of a GFCI reduces the risk of electric shock.
DeďŹ nitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to these
symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, result in could death or serious injury.
CAUTION: Indicates a potentially hazardous situation which,
if not avoided, result in may minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, result in may property damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR
ANY DEWALT TOOL, CALL US TOLL FREE AT: 1-800-4-DEWALT
(1-800-433-9258).
WARNING: To reduce the risk of injury, read the instruction
manual.
General Power Tool Safety Warnings
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term âpower toolâ in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
Product specificaties
| Merk: | DeWalt |
| Categorie: | Cirkelzaag |
| Model: | DCS373 |
Heb je hulp nodig?
Als je hulp nodig hebt met DeWalt DCS373 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Cirkelzaag DeWalt
23 April 2022
12 April 2022
28 Februari 2022
23 April 2022
2 Maart 2022
22 April 2022
1 Maart 2022
14 April 2022
12 April 2022
31 Augustus 2021
Handleiding Cirkelzaag
- Cirkelzaag Bosch
- Cirkelzaag Atika
- Cirkelzaag Batavia
- Cirkelzaag Black Decker
- Cirkelzaag Bort
- Cirkelzaag Bruder Mannesmann
- Cirkelzaag Defort
- Cirkelzaag Festool
- Cirkelzaag Kingcraft
- Cirkelzaag Max
- Cirkelzaag Parkside
- Cirkelzaag Skil
- Cirkelzaag Stomer
- Cirkelzaag Toledo
- Cirkelzaag Varo
- Cirkelzaag Vonroc
- Cirkelzaag Probuilder
Nieuwste handleidingen voor Cirkelzaag
13 Oktober 2023
13 Oktober 2023
13 Oktober 2023
13 Oktober 2023
13 Oktober 2023
8 September 2023
2 Augustus 2023
2 Augustus 2023
8 Juli 2023
7 Maart 2023