Denver TRC-1480 MK2 Handleiding

Denver Weerstation TRC-1480 MK2

Lees hieronder de 📖 handleiding in het Nederlandse voor Denver TRC-1480 MK2 (5 pagina's) in de categorie Weerstation. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

ENG-1

English

INSTRUCTION MANUAL DENVER TRC-1480 MK2

Wireless Indoor and Outdoor Thermometer, Clock and Weather Station

QUICK START GUIDE

1. Slide the battery cover at the ar of your indoor unit open. re

2. Insert 2 x AAA batteries in the battery compartment; observe correct polarity (+/-) as printed

inside the battery compartment.

3. Replace the battery cover. After a few seconds the LCD shows default time, calendar and

current indoor temperature and starts to search for the outdoor temperature signal.

ENG-2

4. Insert 2 x AAA batteries in the outdoor sensor. The outdoor temperature will be displayed with

“CH1” shown on the lower line of the LCD. Your indoor unit is synchronized with the outdoor

sensor on Channel 1; the outdoor temperature is display . ed

Please note:

Your outdoor sensor has a transmission range of 30m with no obstructions. The actual transmission

range can vary, depending on the signal path. Obstructions (roof, walls, ﬂoors, ceilings, trees, etc.)

aﬀect the signal range.

SET CALENDAR, 12/24-HOUR FORMAT AND TIME

1. Press and hold SET / ALM SET for 2 seconds, the time digits change to “2008 YR” and start

ﬂashing. Press +/- to set the year.

2. Press SET / ALM SET again, the month digits start ﬂashing. Press +/- to set the month.

3. Press SET / ALM SET again, the date digits start ﬂashing. Press +/- to set the date.

4. - Press SET / ALM SET again, the time digits change to “24 Hr”, press +/ to select “12 Hr” time

format or “24 Hr” time format. When selecting “12 Hr”, the AM / PM icon will be displayed.

5. Press SET / ALM SET again, the time digits “0:00” show and the hour digits start flashing. Press

+/- to set the hours.

6. Press SET / ALM SET again, the minute digits start ﬂashing. Press - button to set the minutes. +/

7. Press SET / ALM SET to return to normal mode, or wait 30 seconds for the unit to return

automatically.

SET ALARM

1. Press SET / ALM SET, the time digits change to the alarm time digits “AM 7:00 AL”. Press and

hold SET / ALM SET for 2 seconds, the hour digits start ﬂashing. Press +/- to set your desired

alarm time hour.

2. Press SET / ALM SET again, the alarm minute digits start ﬂashing. Press +/- to set the alarm

minutes.

3. ﬂashing. Press +/- to set the Press SET / ALM SET again, time digits change to “05” and start

snooze duration between 1 and 20 minutes.

4. Press SET / ALM SET to return to normal mode, or wait 30 seconds for the unit to return

automatically.

TURN ALARM ON OR OFF

Press SET / ALM SET to display the alarm time. When the alarm time is displayed, press + to turn on

/ oﬀ the daily alarm. When the alarm function is turned on, the icon appears between the hour and

minute digits.

SNOOZE FUNCTION

When your alarm turns on, the clock sounds a beep to wake you up. The icon starts ﬂashing.

1. Press SNOOZE to stop the alarm temporarily, the icon keeps ﬂashing. The alarm will beep

again after 5 minutes.

2. Press + / CHANNEL (ALM On-Oﬀ) to stop the alarm, the alarm beep will stop and the icon

illuminates; the alarm will beep again at the same time the next day.

Alarm Duration: 2 minutes.

DISPLAY TEMPERATURE IN DEGREES C OR F

Press (°C/°F) to display the temperature in degrees Celsius or Fahrenheit. –

READ THE MAXIMUM/MINIMUM TEMPERATURE RECORDS

1. Press MAX/MIN at the rear to display the indoor/outdoor maximum or minimum temperatures.

2. When maximum indoor/outdoor temperatures are displayed, press and hold MAX to clear the

maximum values; the unit will start recording and displaying updated data again.

3. When minimum indoor/outdoor temperature and humidity are displayed, press and hold MIN to

clear the minimum values; the unit will start recording and displaying updated data again.

ENG-3

USE INSTRUCTIONS FOR THE WEATHER STATION

There are four types of weather display on your weather station:

SUNNY / SUNNY AND CLOUDY / CLOUDY / RAINY.

SUNNY

SUNNY AND CLOUDY

CLOUDY

RAINY

Please note: For better use of your weather station, place it in a location with air circulation, e.g.

close to an open window. Placing it in an air-conditioned environment will aﬀect its accuracy.

After your weather station is powered up, it will take around 24 hours to stabilize. The weather icons

on the display give reference to the next 6-12 hours weather conditions. It may not match with the

current weather condition outside.

SYNCHRONIZE CLOCK WITH MULTIPLE OUTDOOR SENSORS

Your indoor unit comes with one outdoor sensor. You can purchase a second or third outdoor sensor

to work with this unit simultaneously.

1. Press + / CHANNEL (ALM On-Oﬀ), the bottom line of the LCD shows “CH2” and “--“. Press and

hold + / CHANNEL / ALM On-Oﬀ for 2 seconds. Insert 2 x AAA batteries in the second outdoor

sensor Change the button setting from 1 to 2 for selecting channel 2. The temperature of the . “ ” “ ”

second outdoor sensor is displayed on the lower line on the LCD.

2. . Repeat this step to synchronize a third outdoor sensor on “CH3”

TROUBLESHOOTING

1. In case your indoor unit shows irrelevant information or digits, it may be aﬀected by electrostatic

discharge or interferences from other devices. Press RESET on the rear of the unit. Your unit

will be reset to the factory settings (time and calendar) and you need to set time and calendar

again.

2. In case the outdoor temperature shows “--“:

2.1) Press + / CHANNEL (ALM On-Oﬀ) to display the correct channel, “CH1” is your default

channel;

2.2) -OFF) for If the outdoor temperature shows “CH1”, press and hold + / CHANNEL (ALM ON

2 seconds. The outdoor temperature will be displayed in approx 1 minute;

2.3) If above procedures do not work, repeat 2.2), bring in the outdoor sensor and press

RESET on the outdoor sensor.

Please note: If you observe a “Low Battery” icon on the lower left side of the LCD (which means your

outdoor sensor has a low battery level), replace the batteries of the sensor.

Product specificaties

Merk:	Denver
Categorie:	Weerstation
Model:	TRC-1480 MK2
Kleur van het product:	Wit
Ingebouwd display:	Ja
Gewicht:	118 g
Breedte:	23 mm
Diepte:	53 mm
Hoogte:	113 mm
Breedte verpakking:	78 mm
Diepte verpakking:	80 mm
Hoogte verpakking:	125 mm
Stroombron:	Batterij/Accu
Klok functie:	Ja
Klok/Datum display:	Ja
Meetfuncties:	Indoor thermometer, Outdoor thermometer
Meetfuncties trend display:	Thermometer
Hoeveelheid per (buitenste) hoofdverpakking:	40 stuk(s)
Type beeldscherm:	LCD
Type batterij:	AAA
Producten per intermodale container (40 ft - High Cube):	51040 stuk(s)
Producten per intermodale container (20 ft):	21200 stuk(s)
Nauwkeurigheid van de temperatuur:	0.1 °C
Temperature measurement range (outside) (T-T):	-50 - 70 °C
Aantal batterijen (sensor):	2
Temperature measurement range (inside) (T-T):	-10 - 50 °C
Transmissiefrequentie:	0.433 GHz