Delta 18-900L Handleiding

Delta Boormachine 18-900L

Lees hieronder de 📖 handleiding in het Nederlandse voor Delta 18-900L (68 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 70 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/68

Instruction manual

Manuel d’utilisation

Manual de instrucciones

18-900L

www.DeltaMachinery.com

Français (23)

Español (45)

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO

Y PÓLIZA DE GARANTÍA. LÉASE ESTE

INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

18" (457 mm) Drill Press

WiTH lAsers

Perceuse à Colonne de

457 mm (18 po) Avec Lasers

Taladro de banco de

457 mm (18 pulg) Con lásers

CROSSHAIR

OBJETIVO CRUZ

CIBLE CROISÉE

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS

Read and understand all warnings and operation instructions before using any tool

or equipment. Always follow basic safety precautions to reduce the risk of personal injury. Improper

operation, maintenance or modification of tools or equipment could result in serious injury and property

damage. There are certain applications for which tools and equipment are designed. This product

should NOT be modified and/or used for any application other than for which it was designed.

If you have any questions relative to its application DO NOT use the product until you have written DELTA® Power

Equipment Corporation and we have advised you. Contact us online at www.DeltaMachinery.com or by mail at Technical

Service Manager, DELTA® Power Equipment Corporation , 4825 Highway 45 North, Jackson, TN 38305.

Information regarding the safe and proper operation of this tool is available from the following sources:

 • PowerToolInstitute,1300SumnerAvenue,Cleveland,OH44115-2851oronlineatwww.powertoolinstitute.com

 • NationalSafetyCouncil,1121SpringLakeDrive,Itasca,IL60143-3201

 • American National Standards Institute, 25West 43rd Street, 4 oor, NewYork, NY 10036 www.ansi.org-ANSI01.1

SafetyRequirementsforWoodworkingMachines

 • U.S.DepartmentofLaborregulationswww.osha.gov

SAVE THESE INSTRUCTIONS!

SAFETY GUIDELINES - DEFINITIONS

Itisimportantforyoutoreadandunderstandthismanual.TheinformationitcontainsrelatestoprotectingYOURSAFETY

and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.

indicates an imminently hazardous situation which, if not avoided, result in will death or serious injury.

indicates a potentially hazardous situation which, if not avoided, result in could death or serious injury.

indicates a potentially haz ard ous situation which, if not avoided, result in may minor or mod er ate injury.

NOTICE indicates a practice not related to personal injury which, if not avoided, result in may property

damage.

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities

contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

• Leadfromlead-basedpaints,

• Crystallinesilicafrombricksandcementandothermasonryproducts,and

• Arsenicandchromiumfromchemically-treatedlumber(CCA).

Yourriskfromtheseexposuresvaries,dependingonhowoftenyoudothistypeofwork.Toreduceyourexposuretothese

chemicals:workinawell-ventilatedarea,andworkwithapprovedsafetyequipment,suchasdustmasksthatarespecially

designed to lter out microscopic particles.

IMPORTANT SAFETY INSTRUCTIONS ..........................2

SAFETY GUIDELINES - DEFINITIONS ...........................2

GENERAL SAFETY RULES .............................................3

ADDITIONAL SPECIFIC SAFETY RULES ......................4

ADDITIONAL SAFETY RULES FOR THE LASERS ........4

FUNCTIONAL DESCRIPTION .........................................6

CARTON CONTENTS .......................................................7

ASSEMBLY ........................................................................ 8

OPERATION 13 ...................................................................

TROUBLESHOOTING 21 ...................................................

MAINTENANCE 21 .............................................................

SERVICE 22 .........................................................................

ACCESSORIES 22 ..............................................................

WARRANTY 22 ...................................................................

FRANÇAIS 23 ......................................................................

ESPAÑOL 45 .......................................................................

GENERAL SAFETY RULES

Failure to follow these rules may result in serious personal injury.

1.For your own safety, read the instruction manual

before operating the machine. Learning the

machine’s application, limitations, and specic hazards

will greatly minimize the possibility of accidents and

injury.

2. Wear eye and hearing protection and always use

safety glasses. Everyday eyeglasses are not safety

glasses.Usecertiedsafetyequipment.Eyeprotection

equipment should comply withANSI Z87.1 standards.

Hearing equipment should comply withANSI S3.19

standards.

3. Wear proper apparel. Do not wear loose clothing,

gloves, neckties, rings, bracelets, or other jewelry

which may get caught in moving parts. Nonslip

protective footwear is recommended.Wear protective

hair covering to contain long hair.

4. Do not use the machine in a dangerous

environment. The use of power tools in damp or wet

locations or in rain can cause shock or electrocution.

Keep your work area well-lit to prevent tripping or

placing arms, hands, and ngers in danger.

5. Do not operate electric tools near flammable

liquids or in gaseous or explosive atmospheres.

Motors and switches in these tools may spark and

ignite fumes.

6. Maintain all tools and machines in peak condition.

Keep tools sharp and clean for best and safest

performance. Follow instructions forlubricating and

changing accessories. Poorly maintained tools and

machines can further damage the tool or machine and/

or cause injury.

7. Check for damaged parts. Before using the machine,

check for any damaged parts. Check for alignment

of moving parts, binding of moving parts, breakage

of parts, and any other conditions that may affect its

operation. A guard or any other part that is damaged

should be properly repaired or replaced with DELTA®

or factory authorized replacement parts. Damaged

parts can cause further damage to the machine and/or

injury.

8. Keep the work area clean. Cluttered areas and

benches invite accidents.

9. Keep children and visitors away. Your shop is a

potentially dangerous environment. Children and

visitors can be injured.

10. Reduce the risk of unintentional starting. Make sure

that the switch is in the “OFF” position before plugging

in the power cord. In the event of a power failure, move

the switch to the “OFF”position.Anaccidentalstart-up

can cause injury. Do not touch the plug’s metal prongs

when unplugging or plugging in the cord.

11. Use the guards. Check to see that all safety devices

are in place, secured, and working correctly to prevent

injury.

12. Remove adjusting keys and wrenches before

starting the machine. Tools, scrap pieces, and other

debris can be thrown at high speed, causing injury.

13. Use the right machine. Don’t force a machine or an

attachment to do a job for which it was not designed.

Damage to the machine and/or injury may result.

14. Use recommended accessories. The use of

accessories and attachments not recommended by

DELTA® may cause damage to the machine or injury

to the user.

15. Use the proper extension cord. Make sure your

extension cordis in good condition.When using an

extension cord, be sure to use one heavy enough to

carry the current your product will draw. An undersized

cord will cause a drop in line voltage, resulting in loss

of power and overheating. See the Extension Cord

Chart for the correct size depending on the cord length

andnameplateampererating.Ifindoubt,usethenext

heavier gauge. The smaller the gauge number, the

heavier the cord.

16. Secure the workpiece. Useclampsor avise tohold

the workpiece when practical. Loss of control of a

workpiece can cause injury.

17. Feed the workpiece against the direction of the

rotation of the blade, cutter, or abrasive surface.

Feeding it from the other direction will cause the

workpiece to be thrown out at high speed.

18. Don’t force the workpiece on the machine. Damage

to the machine and/or injury may result.

19. Don’t overreach. Loss of balance can make you fall

into a working machine, causing injury.

20. Never stand on the machine. Injury could occur if the

tool tips, or if you accidentally contact the cutting tool.

21. Never leave the machine running unattended. Turn

the power off. Don’t leave the machine until it comes to

a complete stop. A child or visitor could be injured.

22. Turn the machine “ ”, and disconnect the OFF

machine from the power source before installing or

removing accessories, changing cutters, adjusting

or changing set-ups. When making repairs, be

sure to lock the start switch in the “OFF” position. An

accidentalstart-upcancauseinjury.

23. Make your workshop childproof with padlocks,

master switches, or by removing starter keys. The

accidental start-up of a machine by a child or visitor

could cause injury.

24. Stay alert, watch what you are doing, and use

common sense. Do not use the machine when you

are tired or under the inuence of drugs, alcohol, or

medication. A moment of inattention while operating

power tools may result in injury.

25. Use of this tool can generate and

disperse dust or other airborne particles, including

wood dust, crystalline silica dust and asbestos

dust. Direct particles away from face and body.

Always operate tool in well ventilated area and provide

for proper dust removal.  Use dust collection system

wherever possible.  Exposure to the dust may cause

serious and permanent respiratory or other injury,

includingsilicosis(aseriouslungdisease),cancer,and

death. Avoid breathing the dust, and avoid prolonged

contact with dust. Allowing dust to get into your mouth

or eyes, or lay on your skin may promote absorption

of harmful material. Always use properly tting NIOSH/

OSHA approved respiratory protection appropriate for

thedustexposure,andwashexposedareaswithsoap

and water.

GENERAL SAFETY RULES

Product specificaties

Merk:	Delta
Categorie:	Boormachine
Model:	18-900L

Heb je hulp nodig?

Als je hulp nodig hebt met Delta 18-900L stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Boormachine Delta

Delta 18-900L Handleiding

4 Juni 2023

Delta 14-651 Handleiding

23 Mei 2023

Handleiding Boormachine

Nieuwste handleidingen voor Boormachine

Festo DGSC-6-10-P-P Handleiding

21 November 2024

Cecotec CecoRaptor Handleiding

19 November 2024

Bavaria By Einhell BAS 18 S-2 Handleiding

19 November 2024

Bavaria By Einhell Bavaria BSM 1000 Handleiding

19 November 2024

Bavaria By Einhell BAS 24 S Handleiding

19 November 2024

Bavaria By Einhell Bavaria BSM 500 Handleiding

19 November 2024

Proviel HTM 1305/1 Handleiding

19 November 2024

Proviel HPAS 18 AK Handleiding

19 November 2024

Bavaria By Einhell BAS 24/1 Handleiding

19 November 2024

Bavaria By Einhell BAS 24 S-2A Handleiding

19 November 2024