DCS BND-CNR Handleiding

DCS Barbecue BND-CNR

Lees hieronder de 📖 handleiding in het Nederlandse voor DCS BND-CNR (2 pagina's) in de categorie Barbecue. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
BNDCNR BEND CORNER BRACKET
INSTALLATION INSTRUCTIONS
Before you begin, read these instructions completely and carefully.
Getting Started
Remove packaging
CONTENTS
Eye Goggles
Screwdriver - Phillips #2
7/16” Socket and Ratchet Driver
7/16” Box or Open End Wrench
Description Qty
Bracket Top 1
Bracket Leg 2
Machine Screw #10-24 x 3/4” Phillips 4
Hex Nut 1/4-20 4
Washer 5/16 ID x 3/4 OD 4
Hex Bolt 1/4-20 x 3/4” 4
BND-CNR :
The BND-CNR is composed of three main pieces (one large 1.
bracket top and two bracket legs) that are held together using
four bolts and nuts. The bracket is mounted to the bend units
with four screws (Fig. 01).
Mounting of the BND-CNR bracket requires two CAD-BND 2.
bend units mounted with a CAD-30 cart between them and
any size CAD cart or refrigeration unit with wrapper on the
outer sides. When assembled, this conguration will provide
a solid base to which the BND-CNR bracket can be safely
mounted. The assembly should look similar to the image
below (Fig. 02).
Note: Before beginning installation, remove screws holding the rear of the center outdoor appli-
ance and cart to prevent damage (Fig. 03). Ensure the grill head is secured to the front of the
cart behind the drip pan.
Fig. 02
TOOLS NEEDED
Installation Instructions
Fig. 01
Fig. 03
Over. . .
CAD-BND CAD30 with
outdoor
appliance CAD-BND
Fisher & Paykel Appliances, Inc.
5900 Skylab Road, Huntington Beach, CA 92647
Customer Care: 888.281.5698 • Fax: 714.372.7003
www.dcsappliances.com P/N 242803 RA
Attach the legs to the backs of the bend units using the provided mounting screws (#10-24 x 1/2” Phillips 3.
Machine Screws). Position the legs on the bend units so that the screws are fed through the outer holes
on the bracket legs (Fig. 04).
Once the legs are securely mounted to the bend units, place the large 4. bracket top on top of the legs
(Fig. 05). The bracket top should rest safely on the legs while you secure the parts together.
Note: DO NOT place any weight on the shelf until step 5 is complete.
With the large 5. bracket top in place, secure the bracket top to the bracket legs using the hex bolt (1/4-20 x
3/4”), the washers (5/16 x 3/4 ) and hex nuts (1/4-20); bolt through the protruding plates on the legs, into
the bracket top (Fig. 05). Once secure, the solid surface can then be placed on the bend corner bracket.
Fig. 04 Fig. 05
ACCEssORiEs REQuiRED:
Solid Surface for Corner Shelf (BND-CNRT)
For alternate types and/or colors of solid surface, contact your local manufacturer and provide the attached
drawing (Fig. 06).
43.42”
.50”
ALL WALLS
R .250
ON ALL CORNERS
AND TOP EDGES
30.85”
90.00°
45.00°
C
L
SYMM
*1.30”
61.19”
*
DIMENSIONS ARE CRITICAL
Fig. 06
CAD-30
(center)
Bend Unit


Product specificaties

Merk: DCS
Categorie: Barbecue
Model: BND-CNR

Heb je hulp nodig?

Als je hulp nodig hebt met DCS BND-CNR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Barbecue DCS

DCS

DCS BND-CNR Handleiding

22 Augustus 2024
DCS

DCS BE1-36RCI Handleiding

20 Februari 2024
DCS

DCS BH1-30R-N Handleiding

11 Februari 2024
DCS

DCS BH1-48R-N Handleiding

11 Februari 2024
DCS

DCS BGB36-BQAR-N Handleiding

11 Februari 2024
DCS

DCS ADN1-20X30 Handleiding

11 Februari 2024
DCS

DCS BGC30-BQ-L Handleiding

11 Februari 2024
DCS

DCS CAD1-36E Handleiding

10 Februari 2024
DCS

DCS TB1-20 Handleiding

10 Februari 2024
DCS

DCS TDD120 Handleiding

10 Februari 2024

Handleiding Barbecue

Nieuwste handleidingen voor Barbecue