Datalogic LYNX MULTI-BATTERY CHARGER Handleiding
Datalogic
Barcode scanner
LYNX MULTI-BATTERY CHARGER
Lees hieronder de 📖 handleiding in het Nederlandse voor Datalogic LYNX MULTI-BATTERY CHARGER (1 pagina's) in de categorie Barcode scanner. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/1
LYNX
MULTI-BATTERY CHARGER
The Multi-Battery Charger, with its 4 slots, allows you to
charge simultaneously 4 Lynx battery packs. Both standard
capacity battery (94ACC0064) and high capacity battery
(94ACC0065) can be recharged with this accessory.
Figure 1
POWER SUPPLY
Plug the power supply, already in the box, into the connector,
then plug the power supply into a socket. Use a country
specific power cord.
Figure 2
LED INDICATORS
Battery Charging Status LED Description
LED Status
Power Green It is constant when the
battery charger is powered
Charger off Empty slot
Red Charging
Green Charge completed
Red blinking Error
822001300
USING THE MULTI-BATTERY CHARGER
Charge Function
Correctly insert the battery pack into the slot: simply press it
into the slot until the battery latch is automatically closed;
charging starts automatically.
Figure 3
To remove the battery, release the latch on the battery pack as
showed in figure 4:
Figure 4
TECHNICAL FEATURES
ELECTRICAL
Power supply* 12V DC
Max consumption 5 A
CHARGING TIME
Std Battery 2h 30
High Cap Battery 4h
PHYSICAL
Dimensions (LxWxH) 210 x 149 x 48 mm
(8.3 x 5.9 x 1.9 in)
Weight (without batteries) 418 g (14.7 oz)
LEDs 4 Charger Status LEDs
1 Power on LED
ENVIRONMENTAL
Working temperature** 0° to +50 °C (+32° to +122 °F)
Storage temperature -20° to +70 °C (-4° to +158 °F)
Humidity 95% without condensation
Electrostatic discharge
EN 61000-4-2 4 KV contact / 8 KV air
* Use only DL approved power adapters
** When inserted in the spare slot, batteries must be charged at a
temperature ranging from 0° to 44 °C.
At higher values the charging may slow down.
Never charge the main device or spare batteries in a closed space
where excessive heat can build up.
FCC COMPLIANCE
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
Modifications or changes to this equipment without the
expressed written approval of Datalogic could void the
authority to use the equipment.
This device complies with PART 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
which may cause undesired operation.
Battery Charging
State LEDs
Power on LED
Product specificaties
| Merk: | Datalogic |
| Categorie: | Barcode scanner |
| Model: | LYNX MULTI-BATTERY CHARGER |
Heb je hulp nodig?
Als je hulp nodig hebt met Datalogic LYNX MULTI-BATTERY CHARGER stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Barcode scanner Datalogic
22 Maart 2023
22 Maart 2023
22 Maart 2023
22 Maart 2023
22 Maart 2023
22 Maart 2023
22 Maart 2023
22 Maart 2023
22 Maart 2023
22 Maart 2023
Andere handleidingen Datalogic
26 Juni 2024
26 Juni 2024
8 Juni 2023
5 Juni 2023
30 Mei 2023
13 Mei 2023
11 Mei 2023
5 Mei 2023
29 April 2023