Dangerous Music CONVERT-2 Handleiding

Dangerous Music Niet gecategoriseerd CONVERT-2

Lees hieronder de 📖 handleiding in het Nederlandse voor Dangerous Music CONVERT-2 (13 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/13

CONVERT-2®

USER GUIDE

SAFETY REVIEW

The Exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying this product

Certain precautions should be taken when using electrical products. Please observe the safety hints by reading the manual and obtaining qualiﬁed

help if necessary to adhere to the precautions.

1. Always use a properly grounded power supply cord with this product. Please do not defeat the ground pin on the mains plug. This connection

provides earth to the chassis and signal grounds inside the device for clean and quiet operation.

2. Avoid high temperature operation in equipment racks by providing air circulation. The number one killer of electronic gear is HEAT. Vented rack

panels may look like wasted space to an interior decorator, but they look like beauty to a technician or equipment designer! If the front panel is

hot, it is roasting inside the box.

3. Avoid areas of high magnetic ﬁelds. The steel chassis is designed to shield the circuits from EMI and RFI (magnetic and radio interference).

When installing equipment in racks, it is prudent to put power ampliﬁers and large power supplies at least several rack spaces, if not in a different

rack, away from equipment that deals with low level signals. Separation of high level and low level equipment can pre-empt trouble caused by

heat and EMI.

4. Care should be taken to avoid liquid spills around equipment. If a spill occurs, please shut off the gear and disconnect the mains. A qualiﬁed

technician should investigate accidents to prevent further equipment damage or personnel hazards caused by spills.

5. If one is uncomfortable with opening gear and changing jumpers or making adjustments, please seek qualiﬁed help if necessary.

6. If adjustments or jumper changes are required, please disconnect the mains plug before opening the top. Dropped screws or tools on a live

circuit board can manifest themselves as burn marks and smoked components. While we feel your pain, (been there) subsequent damage is not

covered by the warranty.

Dangerous Music Incorporated reserves the right to change the speciﬁcations or modify the designs of its equipment. Sending in the registration

card is our way of keeping in touch with users of our equipment should this become necessary. Registration information is always kept conﬁdential

and never disclosed to third parties for any reason. Company contact information is on the last page of this manual.



The CE sign on this product signiﬁes the fact that this product has been tested and veriﬁed to conform to the appli-

cable standards of 89/336/EEC.EN55103-1 (emissions) EN61000-2 (immunity) and EN60065:2002 (safety requirements)

This product uses components of the types and quantities that comply with the EC RoHS standard 2002/95/EC. A list

of suppliers and materials is available from DMI. We tightly control production to use top quality materials.

1 | | II

THANK YOU

Thank you for choosing products from the exciting and innovative line of Dangerous Music recording equipment. Many years of reliable

service can be expected from our gear. This is made possible through careful design, construction, and component choices by recording

industry veterans.

D/A Conversion has been an integral part of the Dangerous Music audio legacy since 2002, when the MONITOR® set the standard for

mastering engineers worldwide. Even with these golden-eared luminaries satisﬁed, Dangerous chose to raise the bar once again. There are

comprehensive tips and application notes in this user’s guide, so don’t skip the read.

If you have any suggestions for applications or future products, feel free to forward them. We are users like you.

ABOUT DANGEROUS MUSIC

“Audio Integrity: non-negotiable.” This is the credo upon which Dangerous Music is founded. Conceived and designed by end users—not

by engineers in lab coats- the results are products that resurrect dynamic range, punch, intelligibility and emotion. These high-ﬁdelity,

uncompromising signal paths are achieved by harnessing several decades of real-world experience. Then the critical listening skills of top

tier engineers are applied, with the result being musical tools that fulﬁll the actual needs of today’s ﬂexible computer based studio.

Product specificaties

Merk:	Dangerous Music
Categorie:	Niet gecategoriseerd
Model:	CONVERT-2

Heb je hulp nodig?

Als je hulp nodig hebt met Dangerous Music CONVERT-2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Dangerous Music

Dangerous Music CONVERT-8 Handleiding

18 Mei 2024

Dangerous Music CONVERT-AD+ Handleiding

17 Mei 2024

Dangerous Music CONVERT-2 Handleiding

19 Augustus 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Livarno Lux IAN 57012 Handleiding

17 November 2024

Livarno Lux IAN 57013 Handleiding

17 November 2024

Livarno Lux IAN 383951 Handleiding

17 November 2024

Palmer Vils Handleiding

17 November 2024

Palmer Wipper Handleiding

17 November 2024

Palmer PLI 04 Handleiding

17 November 2024

Palmer Pedalbay 60 PB Handleiding

17 November 2024

Palmer PAN 02 PRO Handleiding

17 November 2024

Supermicro SC813T-500C Handleiding

17 November 2024

Elcom REN705S Handleiding

17 November 2024