D-Link DUB-C2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor D-Link DUB-C2 (40 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/40
2-PORT HI-SPEED USB 2.0
CARDBUS ADAPTER
Quick Installation Guide+
Installations-Anleitung+
Guide d’installation+
Guía de instalación+
Guida di Installazione+
Installatiehandleiding+
Instrukcja instalacji+
Instalační příručka+
Telepítési Segédlet+
Installasjonsveiledning+
Installationsvejledning+
Asennusopas+
Installationsguide+
Guia de Instalação+
Οδηγός Γρήγορης Εγκατάστασης το+
Vodič za brzu instalaciju+
Kratka navodila za uporabo+
Ghid de instalare rapidă+
1
Quick Installation Guide
DUB-C2
2-Port Hi-Speed USB 2.0 CardBus Adapter
Check Your Package Contents
DUB-C2 CD with Manual and Drivers
Installing the DUB-C2 Drivers
A. Insert the driver CD, which is included with the DUB-C2, into the optical drive of your
computer.
B. Choose the preferred language and click on Install Drivers.
C. When prompted Finished, click OK. Or if prompted to reboot (under Windows 98SE only),
click Yes.
Installing the DUB-C2 into the Notebook’s PCMCIA CardBus slot
A. Leave the driver CD in the optical drive of your notebook.
B. Insert the front end of the DUB-C2into the PCMCIA CardBus slot on your notebook until it
is firmly seated. Make sure that the card is face-up, as shown. Do not force the insertion.
DO NOT insert the DUB-C2 into the notebook’s
PCMCIA CardBus slot before installin
g
the drivers.
2
Finishing the Installation
The following steps are only applicable if your system is running Windows XP without a
Service Pack installed or under Windows 98SE/ME/2000. Install the latest Windows XP
Service Pack on your computer for optimal product performance. Driver installation will
proceed automatically for Windows XP users with a Service Pack already installed. If Service
Packs are not installed or under Windows 98SE/ME/2000, follow these steps to complete the
driver installation
A. Power on the computer.
B. Windows will detect new hardware and prompt you for the drivers, which can be found on
the CD provided. Please follow onscreen instructions. For detailed instructions on driver
installation, please refer to the manual on the CD.
C. If prompted to restart (under Windows ME and Windows 98 only), click Yes.
D. You can now remove the driver CD from the optical drive of your notebook.
Troubleshooting
1. If I’ve lost my CD, what can I do?
The CD contains software drivers and manual that can also be obtained from D-Link
website (see Technical Support below).
2. Why are the devices connected to the DUB-C2 not functioning properly?
When connecting the USB cable to the computer, make sure that the USB cable is
inserted securely.
Remember that when connecting USB 1.0 or USB 1.1 products into a USB 2.0 adapter,
the USB 1.x product will not work faster.
To ensure optimal performance when using USB 2.0 devices, use a USB 2.0 certified
cable.
3. How do I install the DUB-C2 on Macintosh OS X?
Drivers for Macintosh are required for versions OS X 10.1.x and OS X 10.2.x. Consult
the user manual for setup instructions.
For OS X 10.3 and OS X 10.4, the drivers are built into your operating system.
Note: This product will not work on OS9 or below.
Technical Support
Thank you for choosing D-Link products. For further information, support and product manuals
please visit the D-Link website at www.dlink.eu.
www.dlink.co.uk
: 08456 12 0003


Product specificaties

Merk: D-Link
Categorie: Niet gecategoriseerd
Model: DUB-C2
Connectiviteitstechnologie: Bedraad
Ondersteunt Mac-besturingssysteem: Ja
Hostinterface: CardBus
Overdrachtssnelheid: 0.48 Gbit/s

Heb je hulp nodig?

Als je hulp nodig hebt met D-Link DUB-C2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd D-Link

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd