D-Link DBA-X1230P Handleiding

D-Link Access point DBA-X1230P

Lees hieronder de 📖 handleiding in het Nederlandse voor D-Link DBA-X1230P (9 pagina's) in de categorie Access point. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/9

Documentation is also available on

the D-Link website

This document will guide you through the basic

installation process for your new D-Link

Nuclias Cloud-Managed AX1800 Access Point

DBA-X1230P

Quick Installation Guide

Access Point

ENGLISH

Hardware Overview

LED Indicators

Figure 1: Front Panel LED

# LED Status Description

1Power/

Cloud

Solid

orange

The DBA-X1230P is booting up.

Blinking

orange

The DBA-X1230P is resetting

to its default settings or is

upgrading its rmware.

Blinking

green

The DBA-X1230P is connecting

to the D-Link Nuclias cloud.

Solid

green

The DBA-X1230P is in cloud mode.

Solid

red

The DBA-X1230P is not working

properly in cloud mode.

Table 1: LED Description

Interface Connectors

23 4

Figure 2: Rear Connectors

# Connector Description

1 Lock slot

Slot to use with the lock plate for inserting

a physical lock to secure the DBA-X1230P

to the mounting plate (optional).

2 Console port Directly manage the AP with no wireless

connection through the console port.

3PoE LAN

port

Gigabit RJ-45 port for data and

Power over Ethernet (PoE) power.

4 Power input Input for the power adapter (optional).

Table 2: Interface Description

Before You Begin

This installation guide provides instructions for

installing the DBA-X1230P on your network.

Additional documentation is also available on the

D-Link support website.

• D-Link Nuclias User Manual: For additional

information and instructions on how to congure

the device using the D-Link Nuclias Cloud.

• DBA-X1230P User Manual: For additional

information and instructions on how to congure

the device using the web user interface.

Package Contents

This DBA-X1230P package should include the

following items:

• 1 x DBA-X1230P

• 1 x Power adapter (optional)*

• 1 x Mounting kit

If any of the above items are damaged or missing,

please contact your local D-Link reseller.

*If the power adapter is not included, it can be

purchased separately. Please contact your local

D-Link reseller.

Setup Preparation

Please ensure that the following items are readily

available before continuing the installation process:

• An active D-Link Nuclias account.

• An active Internet connection to connect to the

D-Link Nuclias cloud.

• A valid device license. Contact your D-Link Nuclias

service provider for more information.

System Requirements

• A PC or laptop with a working Ethernet adapter

or wireless interface.

• Mozilla Firefox 52.0 or higher, Internet Explorer

11 or higher, Safari 10.1 or higher, Google

Chrome 59 or higher.

• OS X 10.8.5, Windows 7, Linux (Ubuntu 12).

ENGLISH

Powering the Access Point

The DBA-X1230P can be powered using one of the

following two methods:

Using Power over Ethernet (PoE)

Use a standard Ethernet cable to connect the LAN

port on the DBA-X1230P to a PoE power source

device such as a PoE switch or PoE injector.

(Optional) Using the Power Adapter

Connect the power connector of the adapter to

the power input on the DBA-X1230P and plug the

adapter into a nearby power outlet.

Conguring the Access Point

Using D-Link Nuclias

Note: To use D-Link Nuclias, the DBA-X1230P must

be connected to the Internet.

The DBA-X1230P is designed to be managed through

the D-Link Nuclias cloud. Refer to the D-Link Nuclias

User Manual for detailed conguration instructions.

Switch or RouterSwitch or Router Management

DBA-X1230P

D-Link Nuclias

Figure 3: Connecting through D-Link Nuclias

1. On an Internet-connected PC, open a web

browser and go to www.nuclias.com.

2. Enter your D-Link Nuclias user name and

password.

If a device’s login credentials are modied using

Nuclias Cloud, the local username and password

will also reect the changes made. To learn more

about conguring your password, please refer to

the Nuclias Cloud manual.

Manual Conguration

Note: D-Link recommends manually conguring the

device before mounting it.

If you are unable to connect to the D-Link Nuclias

cloud, you may need to manually configure the

DBA-X1230P using its web user interface (UI).

Refer to the DBA-X1230P User Manual for detailed

conguration instructions.

Use one of the following methods to access the web

user interface:

Connecting through Ethernet

Note: The management PC must be in the same

subnet as the DBA-X1230P.

1. Use an Ethernet cable to connect the DBA-X1230P

to the management PC or to the switch or router

the management PC is connected to.

2. Open a web browser and type in the default

host name of the DBA-X1230P and press Enter.

The default host name is DBA-X1230P-XXXX

where XXXX represents the last 4 characters

of the MAC address listed on the device label

located on the bottom of the device.

3. When prompted, enter the default login

credentials:

User name: admin

Password: admin

Connecting Wirelessly

1. Connect the management PC to the default SSID

of the DBA-X1230P. The SSID will be in the format

DBA-X1230P-XXX where XXXX represents the

last 4 characters of the MAC address listed on the

device label located on the bottom of the device.

2. Open a web browser and type in the default

host name of the DBA-X1230P and press Enter.

The default host name is DBA-X1230P-XXXX

where XXXX represents the last 4 characters

of the MAC address listed on the device label

located on the bottom of the device.

3. When prompted, enter the default login

credentials:

User name: admin

Password: admin

Attaching the Rubber Pads

The included rubber pads can be placed on the

bottom of the device to prevent the device from

damaging the surface it is placed on.

1. Remove the rubber pads from the adhesive strip.

2. Stick one pad on each foot on the bottom panel

of the access point.

Product specificaties

Merk:	D-Link
Categorie:	Access point
Model:	DBA-X1230P
Kleur van het product:	Wit
Gewicht:	484 g
Breedte:	170 mm
Diepte:	42.2 mm
Hoogte:	170 mm
LED-indicatoren:	Stroom
Stroom:	1.5 A
Plaatsing:	Ceiling, Wall
Montage gereedschap:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Netvoeding:	16 W
MIMO:	Ja
Duurzaamheidscertificaten:	CE
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Netwerkstandaard:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3az, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x
Ondersteunde beveiligingsalgoritmen:	SSID, WPA2, WPA3-Enterprise
Soort antenne:	Intern
Antennas quantity:	4
Antenne versterkingsniveau (max):	4 dBi
Temperatuur bij opslag:	-20 - 65 °C
Upgraden van firmware mogelijk:	Ja
Luchtvochtigheid bij opslag:	5 - 95 procent
MAC adres filtering:	Ja
MIMO-type:	Multi User MIMO
Maximale overdrachtssnelheid van gegevens:	- Mbit/s
2,4 GHz:	Ja
5 GHz:	Ja
Power over Ethernet (PoE):	Ja
Datastroombeheer:	Ja
Maximale overdrachtssnelheid van gegevens (2.4 GHz):	575 Mbit/s
Maximale overdrachtssnelheid van gegevens (5 GHz):	1200 Mbit/s
AC-ingangsspanning:	12 V
Stroomverbruik (typisch):	14 W
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 95 procent
Code geharmoniseerd systeem (HS):	85176990
Aantal SSID-ondersteuningen:	16
Type antennerichting:	Omni-directioneel
Remote Authentication Dial-In User Service (RADIUS):	Ja
Zendvermogen (CE):	23 dBm
Zendvermogen (FCC):	22 dBm