CZUR M3000 Pro Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor CZUR M3000 Pro (16 pagina's) in de categorie Scanner. Deze handleiding was nuttig voor 65 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/16
USER MANUAL (M3000 Pro)
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
The symbol indicates DC voltage.
RECYCLING: This product bears the selective sorting symbol for Waste electrical and electronic
equipment ( WEEE ). This means that this product must be handled pursuant to European directive
2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
1.1 Product Summary .........................................................................................1
1.2 Product Dimensions .......................................................................... ........2...
1.3 Installation Guide ..........................................................................................2
1.4 Product Appearance .....................................................................................3
1.5 Product Specifications ..................................................................................5
1.6 Packaging and Accessories ............................................................... .....6.....
2.1 Scanning Preparation ....................................................................... .........6...
2.2 Work Mode ...................................................................................................7
2.2.1 Computer Mode (USB-PC) ...................................................................7
2.2.2 Visual Presenter Mode (USB-PC) ............................................ .....9.......
3.1 PC Mode (USB) Problems ............................................................................9
4.1 After Sales Services and Guarantee ...........................................................11
4.2 Contact Information ........................................................................... ....12.....
Chapter I Introduction
Chapter II Operation Guidelines
Chapter III Frequently Asked Questions and Troubleshooting
Chapter IV Terms of Service
Contents
Product specificaties
Merk: | CZUR |
Categorie: | Scanner |
Model: | M3000 Pro |
Soort bediening: | Buttons, Foot pedal |
Kleur van het product: | Zwart |
Ingebouwd display: | Ja |
Gewicht: | 4500 g |
Breedte: | 520 mm |
Diepte: | 505 mm |
Hoogte: | 425 mm |
Stroom: | 0.6 A |
Beeldscherm: | LCD |
Beeldschermdiagonaal: | 2.4 " |
Resolutie: | 320 x 240 Pixels |
RAM-capaciteit: | 1 GB |
Video recording: | Ja |
USB-poort: | Ja |
Meegeleverde kabels: | USB |
Vaste focale lengte: | 4.7 mm |
Waarschuwingssignaal: | Ja |
USB-versie: | 2.0 |
Megapixels: | 20 MP |
Type beeldsensor: | CMOS |
Beeldsensorformaat: | 1/2.3 " |
Processor architectuur: | MIPS |
Ondersteund beeldformaat: | JPG |
Type processor: | Ja |
Aantal per verpakking: | 1 stuk(s) |
Ingangsspanning: | 100 - 240 V |
Ondersteunt Windows: | Windows 10, Windows 7, Windows 8, Windows XP |
Soort voeding: | AC |
Processor operating modes: | 32-bit |
Ondersteunt Mac-besturingssysteem: | Mac OS X 10.11 El Capitan |
Output current: | 2 A |
Spanning: | 9 V |
Soort scanner: | Overhead scanner |
Optische scanresolutie: | - DPI |
Maximale ISO A-series papierformaat: | A3 |
ISO A-series afmetingen (A0...A9): | A3 |
Duplex scannen: | Nee |
Pager functie: | Ja |
Maximum scanformaat: | 297 x 420 mm |
Scan bestandsformaten: | PDF, DOCX, JPG, XLS |
Selecteerbare achtergrondkleur: | Ja |
Dagelijkse diensten cyclus (max): | - pagina's |
Functietoetsen: | Scannen |
AC-ingangsfrequentie: | 50 - 60 Hz |
Lichtbron: | LED |
Digitaal watermerk: | Ja |
Kleurdiepte uitvoer: | 24 Bit |
Aantal laserpunten: | 3 |
Vaste focus: | Ja |
Laserstralen: | Ja |
Gezichtsveld: | 82 ° |
Ingebouwde OCR: | Ja |
Verdraaiing: | 0.3 procent |
Functies slimme scannersoftware: | Auto-scanning, Blank page detection, Combined sides scanning |
Trimmen: | Ja |
Achterbrandpuntsafstand (BFL): | 6.18 mm |
IR-filter: | 650 nm |
Schermopname: | Ja |
Boekenwip: | Ja |
Boekomslagblok: | Ja |
Aantal ondersteunde OCR-talen: | 180 |
Heb je hulp nodig?
Als je hulp nodig hebt met CZUR M3000 Pro stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Scanner CZUR
26 Augustus 2023
26 Augustus 2023
26 Augustus 2023
26 Augustus 2023
26 Augustus 2023
26 Augustus 2023
Handleiding Scanner
- Scanner Braun
- Scanner HP
- Scanner Panasonic
- Scanner Nikon
- Scanner Epson
- Scanner Canon
- Scanner Honeywell
- Scanner Medion
- Scanner Xerox
- Scanner Agfa
- Scanner Agfaphoto
- Scanner Albrecht
- Scanner Antec
- Scanner Avision
- Scanner Brother
- Scanner Dnt
- Scanner Dyka
- Scanner Dymo
- Scanner Easypix
- Scanner Elmo
- Scanner Fujitsu
- Scanner Genius
- Scanner GlobalTronics
- Scanner Hella
- Scanner ICarsoft
- Scanner Ion
- Scanner Ipevo
- Scanner IRIS
- Scanner Kenko
- Scanner Kensington
- Scanner Kodak
- Scanner Kogan
- Scanner Konica Minolta
- Scanner Konig
- Scanner Lenco
- Scanner Lexmark
- Scanner Maginon
- Scanner Martin
- Scanner Minolta
- Scanner Mustek
- Scanner Nedis
- Scanner Plustek
- Scanner RadioShack
- Scanner Reflecta
- Scanner Renkforce
- Scanner Ricoh
- Scanner Rittz
- Scanner Rollei
- Scanner Sagem
- Scanner Silvercrest
- Scanner Targus
- Scanner Technaxx
- Scanner Tevion
- Scanner Traveler
- Scanner Trust
- Scanner Uniden
- Scanner Veho
- Scanner Voltcraft
- Scanner Yupiteru
- Scanner Zebra
- Scanner Zolid
- Scanner Jay-tech
- Scanner Jobo
- Scanner Matter And Form
- Scanner Steren
- Scanner Cobra
- Scanner DTRONIC
- Scanner Eurolite
- Scanner Visioneer
- Scanner AVerMedia
- Scanner Blackmagic Design
- Scanner Newland
- Scanner Panduit
- Scanner Vupoint Solutions
- Scanner Ross-Tech
- Scanner DENSO
- Scanner Perfect Choice
- Scanner Soundsation
- Scanner CDVI
- Scanner Scan Dimension
- Scanner Pacific Image
- Scanner Doxie
- Scanner Cartrend
- Scanner 3DMAKERPRO
- Scanner Neat
- Scanner Ambir
- Scanner Microtek
Nieuwste handleidingen voor Scanner
14 December 2024
14 December 2024
5 December 2024
2 December 2024
2 December 2024
1 December 2024
23 November 2024
16 November 2024
15 November 2024
25 September 2024