CyberPower CRA30008 Handleiding

CyberPower Kabels voor pc's en randapparatuur CRA30008

Lees hieronder de 📖 handleiding in het Nederlandse voor CyberPower CRA30008 (4 pagina's) in de categorie Kabels voor pc's en randapparatuur. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

USER’S MANUAL

Cable Ladder KitCable Ladder Kit

SAVE THESE INSTRUCTIONS

Please read this manual and follow the instructions for installation and use.

K01-0000558-00

Parts List

Item

Qty

Part

Ladder Components

Ladder Section (5ft/1.5m)

Assembly Hardware

Ladder Connector

M6 Phillips Pan Head Screw

Installation Hardware

Hook Bracket

M5 Flange Nut

M6 Phillips Pan Head Screw

M6 Flange Nut

Grounding Hardware

Grounding Wire

M6 Phillips Pan Head Screw

Toothed Lock Washer

CRA30008

B C

D E F G

H I J

Installation

Assembly

The cable ladder includes 2 sections (A). Individual sections can be used alone (5ft/1.5m), or

they can be tied together to form a longer cable ladder (10ft/3m).

To tie both sections together, use 4 x M6 screws (C) to bolt the ladder connectors (B) on to

the ladder sections (A) as shown below.

Rack Enclosure

A power cable trough (CRA30009) or a data cable partition (CRA30010) is required to be

installed on a rack enclosure prior to the installation of the cable ladder. The cable ladder can

be used to connect cable runs between rack aisles or within a rack row.

First, bolt the hook brackets (D) using the included M5 flange nuts (E) to the rivets on the

cable ladder as shown below.

Installing Cable Ladder Across Rack Aisles

Insert the ladder hooks into the slots in the power cable trough or data cable partition as

shown below.

NOTE: The cable troughs have two sets of slots at different heights. Install the cable ladder using the

slots best suited for your application.

Power Cable Trough Data Cable Partition

Installing Cable Ladder Within Rack Row

Screw the ladder hooks on to the power cable trough using the existing M6 screws as

shown below.

NOTE: Cable ladder installation within a rack row can only be done with the use of power cable

troughs (CRA30009).

Install on Open Frame Rack

To install the cable ladder on an open frame rack, place one end of the ladder on top of

the rack and use the M6 screws (F) with the M6 flange nuts (G) to secure the ladder as

shown below.

NOTE: For safety the cable ladder should always be installed between racks of the same height.

Product specificaties

Merk:	CyberPower
Categorie:	Kabels voor pc's en randapparatuur
Model:	CRA30008
Kleur van het product:	Zwart
Gewicht:	7600 g
Breedte:	302 mm
Diepte:	1500 mm
Hoogte:	32 mm
Gewicht verpakking:	8400 g
Breedte verpakking:	100 mm
Diepte verpakking:	1540 mm
Hoogte verpakking:	340 mm
Soort:	Paneel voor kabelbeheer
Materiaal behuizing:	Staal
Duurzaamheidscertificaten:	RoHS