CyberPower CPS200SI Handleiding

CyberPower Accu CPS200SI

Lees hieronder de 📖 handleiding in het Nederlandse voor CyberPower CPS200SI (1 pagina's) in de categorie Accu. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

Spring

Decorative Ring

Contact Pin

Contact Retainer

15 ampFuse

12V DC Adapter

200 Watt AC Mobile Power Inverter

User Guide

CPS200SI

This guide contains important information regarding the safety, operation, maintenance, and

storage of this product. Failure to read this guide and follow the directions could result in

injury and/or property damage.

Table of Contents

Operating and Storage Tips

Specications

Troubleshooting

DC Fuse Replacement (For Cigar Plug)

Product Limited Warranty

Important Safety Information

Introduction

Package Contents

Product Features (Model CPS200SI)

Product Features (Model CPS200SI) - continued

Operation

Important Safety Information.............................................................. 03

Introduction................................................................................................ 04

Package Contents..................................................................................... 04

Product Features....................................................................................... 05

Operation..................................................................................................... 06

Operating and Storage Tips.................................................................. 07

Specications.............................................................................................. 08

Troubleshooting........................................................................................ 08

DC Fuse Replacement............................................................................. 10

Product Limited Warranty...................................................................... 11

Before installing and using the CyberPower CPS200SI Mobile Power Inverter

please read and follow these safety instructions.

Thank you for choosing the CyberPower CPS200SI AC Mobile Power Inverter. To

enjoy all the features and benets of CPS200SI, please read and follow all

instructions completely.

The CyberPower CPS200SI AC Mobile Power Inverter is a plug-and-play, cordless,

portable source of 110/120 volt AC power. The AC Mobile Power converts DC

battery power from your vehicle into standard 110/120 volt AC power, allowing

you to power most notebook computers, cell phone chargers, camcorders, and

other electronic products drawing 200 watts or less of AC power.

Operating Tips

The CPS200SI inverter should only be operated under the following conditions:

Dry - Do not allow water or other liquids to come into contact with the

inverter.

Temperature - Ambient air temperature should be between 32

oF - 86oF

(0 oC - 30oC). Keep the inverter out of direct sunlight.

Air Circulation - Keep the inverter's ventilation slots clear to ensure

free air ow to the unit. Do not place any items on or over the inverter

during operation. The unit will shut down if it overheats.

The CPS200SI contains a fuse inside in the lighter adapter (see Figure 2) to

protect the unit against overloading. If the inverter draws more than 150 watts,

the internal fuse may open to protect the inverter, vehicle battery, and the

connected equipment. To replace the fuse, please follow the instructions below:

1. Unplug the inverter from the power source.

2. Remove the contact retainer from the 12V DC adapter.

3. Replace the 15 amp fuse.

4. Reassemble the fuse, contact pin, and contact screw carefully.

5. Ensure all pieces shown in Figure 2 are installed in the correct sequence.

* Note: For in-warranty units, the replacement fuse can be obtained from CyberPower Technical Support.

CyberPower warrants the CPS200SI ("Inverter") to be free from defect in material or manufacture for

two years. If a defect results in product failure during its normal use, CyberPower's sole

responsibility is to repair or replace (as its sole option) the Inverter.

The foregoing Limited Warranty is the consumer's sole and exclusive remedy and excludes any

incidental or consequential damages. Some States do not allow the exclusion or limitation of

incidental and consequential damages, so certain of the above limitations or exclusions may not

apply to you (the Consumer). This limited warranty gives the Consumer specic legal rights and the

Consumer may have other rights, which vary from State to State.

To make a Limited Warranty claim:

1. Pack and ship the Inverter to CyberPower at 5555 12th Ave. E., Suite 110, Shakopee, MN 55379.

2. Clearly indicate on the outside of the packaging that this is a "WARRANTY RETURN"

3. Clearly include your name and address (a) on the outside packaging and (b) on a sheet of paper

enclosed in the box with the Inverter that is being returned.

4. You MUST prepay all shipping costs and you are responsible for packaging and shipment for the

return of the defective product.

Cyber Power Systems (USA), Inc.

5555 12th Avenue East, Suite 110, Shakopee, MN 55379, U.S.A.

TEL: (952) 403-9500 FAX: (952) 403-0009 Toll-Free: (877) 297-6937

E-mail: sales@cyberpowersystems.com Web: www.cyberpowersystems.com

Entire contents copyright C 2007 Cyber Power Systems, Inc.

1. 12 volt input socket

2. Cooling Fan

3. USB charger port

4. LED indicator light

5. 120 volt AC outlets

6. Ventilation slots

7. AC outlet protection cover

1. Remove the cigarette lighter from the automobile lighter socket and insert the CPS200SI

into your vehicle's lighter socket.

2. First, verify that the product draws 200w or less, then plug in the product.

3. Please make sure the unit is rmly plugged into your vehicle's lighter socket for proper

operation. You may rotate the plug to make sure there is good contact.

4. An LED light indicates the CPS200SI is operational.

5. To avoid discharging the battery, always remove the CPS200SI plug from the lighter

socket in your vehicle when not in use.

Do not operate the CPS200SI near ammable materials, fumes, or gases.

Always use the inverter where there is adequate ventilation. Do not

obstruct the ventilation slots.

Never immerse the unit in water.

Proper cooling is essential when operating the inverter. Refrain from

placing the inverter near the vehicle's heat vent or in direct sunlight.

Always turn the inverter o by removing it from the DC accessory socket

when not in use.

Check the warning labels on battery chargers or adapters before

connecting them to the inverter. Do not connect battery chargers or

adapters with warnings about using with inverters.

Please use Clamp Plug if the load is over 150W.

This package includes:

200 Watt AC Mobile Power Inverter

Warranty Registration Card

CPS200SI User Guide

Figure 1. Product Features

Storage Tips

Proper storage temperature range is 50

oF - 85oF (10oC - 28oC)

Please store and use the inverter in a cool and dry place.

Avoid exposing the inverter to heating elements, direct sunlight,

excessive humidity, or dampness.

Clamp Plug Tips

Please use Clamp Plug if the load

is over 150W. Please reference the

installation guide on the right. Installation Guide:

1. Connect the RED cable to the

POSITIVE terminal of the battery.

2. Connect the BLACK cable to the

NEGATIVE terminal of the battery.

Output Power Max 200 Watts

Output Voltage 120 Volts +/- 10%

Output Frequency 60 Hz

Output Waveform Simulated Sine Wave

Input Voltage 10.8 to 15.8 volts

Low Voltage Shutdown 10.5 volt

Problem

No AC output power

(Power indicator is not

illuminated)

Poor contact with lighter socket.

Automotive electrical system

requires ignition to be on.

Car's lighter socket fuse is blown.

Over-heating.

Vehicle's battery voltage is

below 10.8 volts.

Your vehicle's battery input

voltage is below 10.8 volt.

Vehicle's battery input voltage is

higher than 15.8 volt.

Inverter is overloaded.

Ensure the inverter adapter is securely

plugged into vehicle's lighter socket.

Replace the lighter socket if necessary.

Turn the vehicle ignition key to the

"Accessory" position.

Check the vehicle fuse panel and

replace the damaged fuse.

Allow inverter to cool down. Ensure

that there is adequate ventilation

around the unit. if the load is between

150 watts to 200 watts, use the clamp

plug. Do not use if the load is over 200

watts.

Unplug the inverter and start the

vehicle to charge the battery.

Check vehicle's battery and verify it is fully

charged. Change vehicle's battery if

necessary.

Check your vehicle's user guide for

troubleshooting.

Reduce the connected equipment to 200

watts or less.

Product specificaties

Merk:	CyberPower
Categorie:	Accu
Model:	CPS200SI
Kleur van het product:	Zwart
Breedte:	25.4 mm
Diepte:	152.4 mm
Hoogte:	82.55 mm
LED-indicatoren:	Ja
Aansluitingen:	1 x USB\n2 x NEMA 5-15R
Uitgangsvermogen:	200 W
Frequentie:	- Hz
Spanning:	120 V
Overbelastingsprotectie:	Ja
Bedrijfstemperatuur (T-T):	0 - 30 °C