CyberPower BP48VP2U01 Handleiding

CyberPower Accu BP48VP2U01

Lees hieronder de 📖 handleiding in het Nederlandse voor CyberPower BP48VP2U01 (11 pagina's) in de categorie Accu. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
YOUR ULTIMATE ALLY IN POWER
EXTENDED BATTERY MODULE
BP48VP2U0 / BP48VP2U021
USER MANUAL
Cyber Power Systems (USA), Inc.
4241 12th Avenue East, Suite 400 | Shakopee, MN 55379 | CyberPowerSystems.com
FEATURES
1. Erum idelloreni aut erersp
2. e llatis cum quae. Bit exped
3. quam derum hic teca
4. bor erovit volligenda
5. accum estminvent hariorem a
6. cerspiento iliciat uribu
7. inis pra ent rrum nonet
8. aut vellupt asimper ibusae v
9. erest, quis quibus
10. sitatib usduatio expe non reritat ecu
11. sci conseque soles am qui
Thank you for purchasing the CyberPower Extended Battery Module BP48VP2U01/
BP48VP2U02 for your Uninterruptible Power Supply! The Extended Battery Module is designed
for various CyberPower UPS systems and can be used in either rack or tower installations. The
heavy gauge power cord has a plug-n-play DC connector for easy installation. When combining
with UPS, the Extended Battery Module provides extended runtime with a 48VDC external
connection. Further, additional parallel-connected Extended Battery Modules will provide a
longer extended runtime for the UPS.
CAUTION! The Extended Battery Module
must be connected to a grounded AC power
outlet with fuse or circuit breaker protection.
DO NOT plug the Extended Battery Module
into an outlet that is not grounded.
CAUTION! The battery can energize
hazardous live parts inside even when the AC
input power is disconnected.
CAUTION! To prevent the risk of fire or electric
shock, install in a temperature and humidity
controlled indoor area, free of conductive
contaminants. Please see specifications for
acceptable temperature and humidity range.
CAUTION! To reduce the risk of electric shock,
do not remove the cover, except to service the
battery. There are no serviceable parts inside,
except for the battery.
CAUTION! DO NOT USE THE UPS
ON ANY TRANSPORTATION! To reduce the
risk of fire or electric shock, do not use the
unit on any transportation such as airplanes or
ships. The eect of shock or vibration caused
during transit and the damp environment can
cause the unit to short out.
CAUTION! Dispose of or recycle the unit after
the end of its life, it should be in accordance
with local regulations.
CAUTION! Please use only VDE-tested, CE-
marked or UL/ CSA certified mains cable,
(e.g. the mains cable of your equipment), to
connect the Extended Battery Module to the
AC outlet.
CAUTION! Do not unplug the unit from AC
Power during operation, as this will invalidate
the protective ground insulation.
DO NOT USE WITH OR NEAR AQUARIUMS!
To reduce the risk of fire, do not use with
or near aquariums. Condensation from the
aquarium can come in contact with metal
electrical contacts and cause the machine to
short out.
CAUTION! DO NOT INSTALL THE UNIT
WHERE IT WOULD BE EXPOSED TO DIRECT
SUNLIGHT OR NEAR A STRONG HEAT
SOURCE!
CAUTION! DO NOT BLOCK OFF
VENTILATION OPENINGS AROUND
THE HOUSING!
CAUTION! A single AC inlet can only support
10 Extended Battery Modules at most. If
connecting more than 10 modules, split them
up onto multiple circuits to avoid an overload.
CAUTION! Do not connect the Extended
Battery Module to itself.
CAUTION! For ground protection, plug AC
power connectivity to wall receptacle with
ground line before using the Extended
Battery Module.
INTRODUCTION
IMPORTANT SAFETY WARNINGS (SAVE THESE INSTRUCTIONS)
This manual contains important instructions that should be followed during installation
and maintenance of the Extended Battery Module and batteries. Please read and follow all
instructions thoroughly before and during the installation and operation of the product.
UNPACKING
When you receive the unit, the package should contain the following items:
Extended Battery Module
Faceplate
Rail Kit CP2RAIL02
Management Cable
Power Cords
Mechanical Accessories
User’s Manual
(14) M5 Pan Head Screws
(8) Plastic Washers
Note: It is available for BP48VP2U02
(1) BM Cable (1) IEC C13-C14, 1 ft (auxiliary)
(1) IEC C13-NEMA 5-15P, 10 ft
(1) IEC C13-C14, 6 ft
(2) Rack-Mount Bracket CPEAR04
(2) Rack-Mount Handle
(1) Extended Baseplate
(12) Dust Cover
(4) M5 Truss Head Screw
(8) M5 Flat Head Screw
(4) M4 Flat Head Screw
(4) Rubber Foot
(4) M4 Round Head Screw
1
62
73
4
5
1
4
5
6
2
3


Product specificaties

Merk: CyberPower
Categorie: Accu
Model: BP48VP2U01
Kleur van het product: Zwart
Gewicht: 25300 g
Breedte: 433 mm
Diepte: 412 mm
Hoogte: 86.5 mm
Gewicht verpakking: 31700 g
Breedte verpakking: 560 mm
Diepte verpakking: 530 mm
Hoogte verpakking: 275 mm
Land van herkomst: China
Pakketgewicht: 31.7 kg
Accu/Batterij voltage: 12 V
Duurzaamheidscertificaten: CE, Federal Communications Commission (FCC), RCM, RoHS, UL, VCCI
Batterij capaciteit: 7 Ah
Accu/Batterij oplaadtijd: 6 uur
Temperatuur bij opslag: -15 - 45 °C
Luchtvochtigheid bij opslag: 0 - 95 procent
Naleving van duurzaamheid: Ja
Aantal inbegrepen batterijen: 8 stuk(s)
Hoogte, in bedrijf: 0 - 3000 m
Hoogte bij opslag: 0 - 15000 m
Compatibiliteit: PR750ERTXL2U, PR1000ERTXL2U
Bedrijfstemperatuur (T-T): 0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V): 0 - 95 procent
Batterijtechnologie: Sealed Lead Acid (VRLA)
Code geharmoniseerd systeem (HS): 8504909000
Hot-swap batterij: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met CyberPower BP48VP2U01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Accu CyberPower

Handleiding Accu

Nieuwste handleidingen voor Accu

Bolt

Bolt CBP-U Handleiding

16 December 2024
Bolt

Bolt PP-5800BP Handleiding

13 December 2024
Bolt

Bolt PP-500DR Handleiding

13 December 2024
PAG

PAG MPL99 Handleiding

10 December 2024
PAG

PAG MPL50 Handleiding

10 December 2024
Apc

Apc RBC27 Handleiding

2 December 2024
Apc

Apc RBC24 Handleiding

2 December 2024
Apc

Apc RBC18 Handleiding

2 December 2024
Apc

Apc RBC44 Handleiding

2 December 2024