CyberPower BU600E Handleiding

CyberPower UPS BU600E

Lees hieronder de 📖 handleiding in het Nederlandse voor CyberPower BU600E (2 pagina's) in de categorie UPS. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

K01-C000053-04

User’s Manual

BU600E / BU800E

BU1000EA

IMPORTANT SAFETY INSTRUCTIONS

(SAVE THESE INSTRUCTIONS)

This manual contains important safety instructions. Please read and follow all instructions carefully during

installation and operation of the unit. Read this manual thoroughly before attempting to unpack, install, or

operate your UPS.

CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity controlled indoor

area free of conductive contaminants. (See the specifications for the acceptable temperature and humidity

range.)

CAUTION! To reduce the risk of overheating the UPS, do not cover the UPS' cooling vents and avoid exposing

the unit to direct sunlight or installing the unit near heat emitting appliances such as space heaters or furnaces.

CAUTION! Do not attach non-computer-related items, such as medical equipment, life-support equipment,

microwave ovens, or vacuum cleaners to UPS.

CAUTION! Do not plug the UPS input into its own output.

CAUTION! Do not allow liquids or any foreign object to enter the UPS. Do not place beverages or any other

liquid-containing vessels on or near the unit.

CAUTION! In the event of an emergency, press the OFF button and disconnect the power cord from the AC

power supply to properly disable the UPS.

CAUTION! Do not attach a power strip or surge suppressor to the UPS.

CAUTION! Unplug the UPS prior to cleaning and do not use liquid or spray detergent.

CAUTION! Servicing of batteries should be performed or supervised by personnel knowledgeable of batteries

and the required precautions. Keep unauthorized personnel away from batteries.

CAUTION! The battery supply should be therefore disconnected in the plus and minus pole at the quick

connectors of the battery when maintenance or service work inside the UPS is necessary.

CAUTION! Internal battery voltage is 12Vdc. Sealed, lead-acid, 6-cell battery.

CAUTION! When replacing the batteries, use the same number and type of batteries.

CAUTION! Do not dispose of batteries in a fire. The battery may explode. Do not open or mutilate the battery or

batteries. Released electrolyte is harmful to the skin and eyes.

INSTALLING YOUR UPS SYSTEM

UNPACKING

The box should contain the following: (1) UPS Unit x1; (2) User Manual x1

OVERVIEW

The BU600/800/1000EA provides automatic voltage regulation for inconsistent utility power, and provides

battery backup during power outages. The BU600/800/1000EA ensures consistent power to your computer

system.

HARDWARE INSTALLATION GUIDE

1. Your new UPS may be used immediately upon receipt. However, recharging the battery for at least 8 hours

is recommended to ensure that the battery's maximum charge capacity is achieved. Charge loss may occur

during shipping and storage. To recharge the battery, simply leave the unit plugged into an AC outlet. The

unit will charge in both the on and off position.

2. With the UPS unit off and unplugged, connect the computer, monitor, and any externally powered data

storage device (Zip drive, Jazz drive, Tape drive, etc. into the battery power supplied outlets. DO NOT plug

a laser printer, copier, space heater, vacuum, paper shredder or other large electrical device into

the battery power supplied outlets. The power demands of these devices will overload and possibly

damage the unit.

3. Plug the UPS into a 2 pole, 3 wire grounded receptacle (wall outlet). Make sure the wall branch outlet is

protected by a fuse or circuit breaker and does not service equipment with large electrical demands (e.g. air

conditioner, refrigerator, copier, etc. Avoid using extension cords.

4. Press the power switch to turn the unit on. The power on indicator light will illuminate and the unit will

"beep".

5. If an overload is detected, an audible alarm will sound and the unit will emit one long beep. To correct this,

turn the UPS off and unplug at least one piece of equipment from the battery power supplied outlets. Wait

10 seconds. Make sure the circuit breaker / fuse is normal and then turns the UPS on.

6. To maintain optimal battery charge, leave the UPS plugged into an AC outlet at all times.

7. To store your UPS for an extended period, cover it and store with the battery fully charged. Recharge the

battery every three months to ensure battery life.

BASIC OPERATION

1. Power Switch

Press the switch for 2 seconds to turn the UPS ON or OFF.

Alarm setting: The audible alarm can be turned OFF or ON by quickly pressing the POWER button

twice. The default setting is for the Alarm On. To turn the Alarm Off, quickly press the power button

twice. You will hear two short beeps when the Alarm is turned off. To turn the Alarm back on, quickly

press the power button twice. You will hear a single short beep when the Alarm is turned on.

2. Led Indicators

This LED is illuminated when the UPS is working.

3. Input Power Cord

Connect to utility power.

4. AC outlet

The UPS provides outlets for connected equipment to insure temporary uninterrupted operation during a

power failure and against surges and spikes.

K01-C000053-04

TECHNICAL SPECIFICATIONS

DEFINITIONS FOR ILLUMINATED LED INDICATORS

LED

Alarm

Condition

Off

Normal

Flash

Beep Twice

Utility Failure - The UPS is providing battery power to outlets.

Flash

Rapid

Beeping

Utility Failure - The UPS is providing battery power. The rapid beeps indicate

the battery will run out of power shortly.

On/Flash

Constant

Tone

Overload - Occurs when connected equipment exceeds the rating of the unit.

Turn the UPS off and unplug at least one piece of equipment from the UPS.

TROUBLESHOOTING

Problem

Possible Cause

Solution

The UPS does not perform

expected runtime.

Batteries are not fully charged.

Recharge the battery by leaving the

UPS plugged in.

Battery is slightly worn out.

Contact CyberPower Systems

Technical Support.

The UPS will not turn on.

The unit is not connected to an AC

outlet.

The unit must be connected to a

220-240V outlet.

The battery is worn out.

Contact CyberPower Systems

Technical Support.

Mechanical problem.

Contact CyberPower Systems

Technical Support.

Outlets do not provide power to

equipment

Fuse is blown or breaker is tripped

due to overload.

Turn the UPS off and unplug at least

one piece connected equipment.

Unplug the power cord of the UPS then

replace the blown fuse with a spare

one or press the circuit breaker knob.

Connect power cord then turn the UPS

on. Make sure that your spare fuse

meets the specification.

Batteries are discharged

Allow the unit to recharge for at least 4

hours.

Unit has been damaged by a surge or

spike.

Contact CyberPower Systems

Technical Support.

For more information, visit www.cyberpower.com

Model

BU600E

BU800E

BU1000EA

Capacity (VA/W)

600/360

800/480

1000/630

Input

Voltage Range

165~280Vac

Nominal Frequency

50 Hz

Output

On Battery Output Voltage

Simulated Sine Wave at 230Vac +/-10%

On Battery Output Frequency

50 Hz +/-1%

Overload Protection

Breaker / Fuse

Physical

Total UPS Receptacles

Dimensions (H x W x D)(mm)

91.5 x 158 x 240

110.5 x 190 x 290

Weight

3.8 kg

4.1 kg

6.9 kg

Battery

Sealed Maintenance Free Lead

Acid Battery

RBP0119 x1

RBP0081 x1

RBP0119 x2

Typical Recharge Time

8 Hours

Warning Diagnostics

Indicators

Power On / Using Battery

Audible Alarms

On Battery, Low Battery, Overload, Fault

Environmental

Operating Temperature

0C to 40C

Operating Relative Humidity

0 to 90%

Management

Auto-Charger

Yes

Auto-Restart

Yes

Product specificaties

Merk:	CyberPower
Categorie:	UPS
Model:	BU600E
Kleur van het product:	Zwart
Gewicht:	3800 g
Breedte:	158 mm
Diepte:	240 mm
Hoogte:	91.5 mm
LED-indicatoren:	Ja
Vormfactor:	Compact
Ondersteund aantal accu's/batterijen:	1
Geluidsalarm(en):	Ja
Responstijd:	4 ms
Uitgangsvermogen:	360 W
Accu/Batterij oplaadtijd:	8 uur
Temperatuur bij opslag:	-20 - 50 °C
Frequentie:	50/60 Hz
Luchtvochtigheid bij opslag:	0 - 90 procent
Hoogte, in bedrijf:	0 - 3000 m
Auto-herstart:	Ja
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 90 procent
Batterijtechnologie:	Sealed Lead Acid (VRLA)
Surge energy rating:	125 J
Aantal AC uitgangen:	3 AC-uitgang(en)
Stroom (max.):	4 A
Output power capacity:	0.6 kVA
Ingang operation voltage (min):	165 V
Ingang operation voltage (max):	280 V
Uitgang operation voltage (min):	220 V
Uitgang operation voltage (max):	220 V
UPS-topologie:	Line-interactive
Typische backup tijd op halve lading:	30 min
Typische backup tijd op volledige lading:	18 min
Automatic Voltage Regulation (AVR):	Ja