Cuisinart CompleteChef FPC-100 Handleiding

Cuisinart Keukenmachine CompleteChef FPC-100

Lees hieronder de 📖 handleiding in het Nederlandse voor Cuisinart CompleteChef FPC-100 (84 pagina's) in de categorie Keukenmachine. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/84

Cuisinart® CompleteChef™ Cooking Food Processor FPC-100

For your safety and continued enjoyment of this product, always read the instruction book carefully before using.

INSTRUCTION

BOOKLET

IMPORTANT

UNPACKING

INSTRUCTIONS

This package contains a Cuisinart

CompleteChef™ Cooking Food Processor

and accessories:

Motor Housing Base, Stainless Steel Work

Bowl, Cooking Lid, Food Processor Lid with 3

Pushers & interlock, Accessory Storage Case,

Dicing Kit, Spatula and Instruction Book.

CAUTION: THE CUTTING TOOLS HAVE

VERY SHARP EDGES.

To avoid injury when unpacking the parts,

please follow these instructions.

1. Place the box on a low table or on the floor

next to the kitchen counter where you

intend to keep the Cooking Food Processor.

Be sure the box is right-side up.

2. Open top flaps – there will be a rectangular

block of packing material that holds the

processor parts, each fitted into a cavity.

3. Remove the Spatula/Instruction Book.

4. Lift out the first layer of packing material.

5. Remove the Stainless Steel Bowl, Food

Processor Lid and Dicing Kit and place

them on the counter or table.

6. Lift out the second layer of packing

material.

7. Remove the Accessory Storage Case and

Motor Housing Base and place them on

the counter or table.

8. Assemble the Stainless Steel Work Bowl

on the Base by grasping bowl handles and

guiding it down into the locked position.

9. Always read the Instruction Booklet

thoroughly before using your Cooking

Food Processor.

10. When ready to use your machine, select

the suitable lid, unlock the Accessory

Storage Case, lift the cover and remove the

clamshell, the Chopping Blade, Dough

Blade, Stirring Paddle, Whisk, Stem Adapter,

Adjustable Slicing Disc, and Reversible

Shredding Disc from each cavity.

CAREFULLY REMOVE THE METAL

CHOPPING BLADE BY GRASPING

THE CENTER HUB AND LIFTING IT

STRAIGHT UP. NEVER TOUCH THE

BLADES, AS THEY ARE RAZOR SHARP.

CAREFULLY REMOVE THE ADJUSTABLE

SLICING DISC BY USING THE PLASTIC

HUB. DO NOT TOUCH THE BLADE,

AS IT IS VERY SHARP.

Carefully remove the Slicing Disc and

Shredding Disc by holding the plastic hub.

Remember to lock the parts in the Storage

Case when not in use.

11. To use the Dicing Kit, unlock the Dicing

Case, lift the cover and remove the

clamshell to access the dicing Cutting

Disc, Dicing Grid and Cleaning Tool.

CAREFULLY REMOVE THE DICING

CUTTING DISC BY USING THE PLASTIC

HUB. DO NOT TOUCH THE BLADE,

AS IT IS VERY SHARP.

12. Save the shipping cartons and plastic foam

blocks. You will find them very useful if you

need to repack the processor for moving or

other shipment.

NOTE: We recommend that you visit our

website, www.cuisinart.com for a fast, efficient

way to complete your product registration.

IMPORTANT

SAFEGUARDS

Always follow these safety precautions when

using this appliance.

Getting Ready

1. Read all instructions.

2. Blades and discs are sharp. Handle them

carefully.

3. Turn the appliance OFF, then unplug from

the outlet when not in use, before assembling

or disassembling parts and before cleaning.

To unplug, grasp the plug and pull from the

outlet. Never pull from the power cord.

4. Do not use outdoors.

5. Do not let cord hang over edge of table or

counter, or touch hot surfaces.

6. Do not operate any appliance with a damaged

cord or plug or after the appliance malfunctions,

or is dropped or damaged in any manner.

Contact the manufacturer at their customer

service telephone number for information on

examination, repair, or adjustment.

Operation

1. Keep hands, as well as spatulas and other

utensils, away from moving blades or discs

while processing food to prevent the possibility

of severe personal injury or damage to food

processor. A plastic scraper may be used,

but only when the food processor motor

is stopped.

2. Avoid coming into contact with moving parts.

Never push food down by hand when slicing

or shredding. Always use pusher.

3. Make sure motor has completely stopped

before removing cover. (If machine does not

stop within 4 seconds after you remove the

bowl cover assembly, call 1-800-762-0190

for assistance. Do not use the machine.)

4. Never store any blade or disc on motor shaft.

To reduce the risk of injury, no blade or disc

should be placed on the shaft except when

the bowl is properly locked in place and the

processor is in use. Store blades and discs out

of reach of children.

5. Be sure cover is securely locked in place before

operating food processor.

6. Never try to override or tamper with cover

interlock mechanism.

7. Do not touch hot surfaces. Use handles or knobs.

8. Extreme caution must be used when moving

an appliance containing hot oil or other hot

liquids.

9. Never feed food by hand. Always use food

pusher.

Cleaning

To protect against risk of electric shock,

do not put base in water or other liquids.

Unplug from outlet when not in use and

before cleaning. Allow to cool before putting

on or taking off parts.

General

1. This appliance is not intended for use by

persons (including children) with reduced

physical, sensory, or mental capabilities, or

lack of experience and knowledge, unless

they are closely supervised and instructed

concerning use of the appliance by a person

responsible for their safety. Close supervision

is necessary when any appliance is used by or

near children. Children should be supervised to

ensure that they do not play with the appliance.

2. Do not operate this, or any other motor-driven

appliance, while under the influence of alcohol

or other substances that affect your reaction

time or perception.

This food processor is UL listed for household

use.

Use it only for food preparation or cooking as

described in the accompanying recipes and

instruction book. Do not use this appliance for

anything but its intended use.

4. The use of attachments not recommended

or sold by Cuisinart may cause fire, electric

shock or personal injury, or damage to your

food processor.

5. To avoid possible malfunction of work bowl

switch, never store processor with cover

assembly in locked position.

6. Maximum rating of 1550 watts is based

on the cooking and stirring functions,

which draw the greatest current.

Other recommended attachments may

draw significantly less current.

7. Do not operate your appliance in an appliance

garage or under a wall cabinet. When storing

in an appliance garage, always unplug the

unit from the electrical outlet. Not doing

so could create a risk of fire, especially if the

appliance touches the walls of the garage or

the door touches the unit as it closes.

NOTICE: Do not fill the bowl above the

marked maximum fill line (or rated capacity)

Product specificaties

Merk:	Cuisinart
Categorie:	Keukenmachine
Model:	CompleteChef FPC-100

Heb je hulp nodig?

Als je hulp nodig hebt met Cuisinart CompleteChef FPC-100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Keukenmachine Cuisinart

Cuisinart Core Custom MFP-WB4 Handleiding

23 Oktober 2024

Cuisinart CCH-3 Handleiding

8 Juli 2024

Cuisinart Core Custom MFD-4 Handleiding

25 Maart 2024

Cuisinart Continuous Feed CFA-10 Handleiding

15 November 2023

Cuisinart FP-7 Handleiding

24 Augustus 2023

Cuisinart FP-9 Handleiding

24 Augustus 2023

Cuisinart CBT700E Handleiding

7 Juli 2023

Cuisinart DFP-14CPY Handleiding

5 Juli 2023

Cuisinart Handy Prep DFP-3 Handleiding

5 Juli 2023

Cuisinart DLC-2 Handleiding

2 Juli 2023

Handleiding Keukenmachine

Nieuwste handleidingen voor Keukenmachine

Silvercrest SKV 1200 A1 Handleiding

4 Januari 2025

Silvercrest SHM 300 F1 Handleiding

30 December 2025

Silvercrest SHM 300 E1 Handleiding

30 December 2025

Silvercrest SSMKH 600 A1 Handleiding

30 December 2025

Silvercrest SSSM 600 A2 Handleiding

30 December 2025

Kenwood MultiPro XL Weigh+ FDM72 Handleiding

24 December 2024

Royal Catering RCPM-30,1S Handleiding

23 December 2024

Geritz RTX2500 Handleiding

23 December 2024

Geritz RTX3500 Handleiding

23 December 2024

Kogan KASTMXBAWTA Handleiding

23 December 2024