Crucial MX300 SATA 2.5 Handleiding

Crucial Solid state drives (ssd) MX300 SATA 2.5

Lees hieronder de 📖 handleiding in het Nederlandse voor Crucial MX300 SATA 2.5 (6 pagina's) in de categorie Solid state drives (ssd). Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

Install Guide

Crucial® 2.5-inch Solid State Drive

Equipment Needed

• Crucial®

2.5-inch SSD

• Non-magnetic tip screwdriver

• Your system’s owner’s manual

Special Considerations

If your Crucial SSD will become your new primary storage

device, we recommend the use of data migration (cloning)

software to move old ﬁles from your existing drive onto your

new Crucial SSD. Data migration software is available at

Crucial.com as part of our Easy Desktop Install Kit or Easy

Laptop Install Kit packages. Data migration software is also

available from a variety of third party vendors.

Precautions

• To protect your system’s components from static damage

during the installation process, touch any of the unpainted

metal surfaces on your computer’s frame before handling

and installing your SSD.

• To protect your SSD, do not touch the connectors on the

drive.

• Do not open the drive enclosure. Doing so will void your

warranty.

Laptop Install..............................................................................page 2

Desktop Install............................................................................page 4

Laptop Installation

1. Power oﬀ the computer. Remove the laptop battery

then hold the power button down to discharge

electricity.

2. Remove the existing storage device from the laptop’s

storage bay. Refer to your computer’s manual for how

to locate and safely remove your existing storage

device.

See Figure 1a-b: Location of SSD on various laptops

1a.

1b.

3. If the existing storage device has brackets or adapters,

remove and attach them to the Crucial SSD in the same

manner.

See Figure 2a-b: Various brackets or adapter examples

4. Align the connector pins on the Crucial SSD with the

SATA connector in the storage device bay and slide the

Crucial SSD into the drive bay. Do not force connection.

See Figure 3: Visual of aligning connector pins

2b.

2a.

5. Replace the cover and power on the computer.

6. Install the operating system, drivers, utilities, and

applications as needed.

7. Installation is complete.

Product specificaties

Merk:	Crucial
Categorie:	Solid state drives (ssd)
Model:	MX300 SATA 2.5
Kleur van het product:	Metallic
Hoogte:	7 mm
Interface:	SATA III
Intern:	Ja
SSD capaciteit:	1050 GB
SSD-vormfactor:	2.5"
Leessnelheid:	530 MB/s
Schrijfsnelheid:	510 MB/s
Overdrachtssnelheid:	6 Gbit/s
Enhanced Power Loss Data Protection technology:	Ja