Crosley CR7002A Troubadour Handleiding

Crosley Platenspeler CR7002A Troubadour

Lees hieronder de 📖 handleiding in het Nederlandse voor Crosley CR7002A Troubadour (9 pagina's) in de categorie Platenspeler. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
Troubadour
CR7002A
910-283300-0010-200
www.crosleyradio.com
Instruction Manual
13
GeneralGeneralGeneral
LIMITED MANUFACTURERS WARRANTY
IMPORTANT SAFETY INSTRUCTION
PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS
THAT ARE APPLICABLE TO YOUR EQUIPMENT
1. Read Instructions - All the safety and operating instructions should be read before the product is operated.
2. Retain instructions - The safety and operating instructions should be retained for future reference.
3. Heed Warnings - All warnings on the product and in the operating Instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should be followed.
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.Use
a damp cloth for cleaning.
6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool; and the like.
8. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart combination to overturn.
9. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from overheating, and these openings must not be blocked
or covered, The openings should never be blocked by placing the product on a bed, sofa, rug, or
other similar surface. This product should not be placed in a built - in installation such as a bookcase
or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
10. Power Sources - This product should be operated only from the type of power source indicated on the marking label,
if you are not sure of the type of power supply to your home. Consult your product dealer or local power company.For
products intended to operate from battery power, or other sources, refer to the operating instructions.
11. Grounding or Polarization - This product may be equipped with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet try reversing the plug, If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12. Power - Cord Protection - Power - supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where they exit from the product.
13. Lightning - For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent damage to the product due to lightning and power - line surges.
14. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
15. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
16. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch
dangerous voltage points or short - out parts that could result in a fire or electric shock. Never spill liquid of any kind
on the product.
17. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
18. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions;
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper adjustment of other controls may result in damage and
will often require extensive work by a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in performance - this indicates a need for service.
19. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
20. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating condition.
21. Wall or ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
22. Heat - The product should be situated away from heat sources such as radiators. Heat registers, stoves, or other
products (including amplifiers) that produce heat.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the userî‚’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio TV technician for help.
AC
Polarized Plug
Crosley Radio, Inc. warrants the product to be free from defects in material and
workmanship under normal use for a period of one year from the original date of
purchase. This warranty is not transferable. If the product is determined to be defective
during the warranty period, the unit will be repaired or replaced at Crosley Radioî‚’s sole
discretion. This warranty covers manufacturing defects and normal consumer use and
does NOT cover damage or failure as a result of abuse, accident, alterations, misuse,
neglect, abnormal wear and tear, inadequate maintenance, commercial or unreasonable
use, damage caused by power surges, mishandling, accident, acts of God or attempted
repair by an unauthorized service agent. Also not covered are cosmetic damages,
cords and antennas.
Should this product fail to function in a satisfactory manner, it is best to first return it
to the store or retailer where it was originally purchased. If additional service is still
needed, the original purchaser must contact our offices to obtain an RA (ReturnFIRST
Authorization) Number.
TO OBTAIN AN RA NUMBER
CALL: 1.888.CROSLEY
(1.888.276.7539)
Send the unit prepaid to the address below in the original packaging (or reasonable
substitute to prevent damage). Clearly mark your RA number on the outside packaging
and include the original sales receipt (or a copy) indicating date of purchase, amount
paid, and place of purchase. You must also include your full name, shipping address
and daytime contact number. Please include a check or money order in the amount
of $19.95, made payable to Crosley Radio, to cover handling and return shipping
charges. Returned products will not be shipped to PO Boxes. Crosley Radio will not
be responsible for delays or unprocessed claims resulting from a purchaserî‚’s failure
to provide any or all of the necessary information.
CROSLEY RADIO
ATTN: RETURNS DEPT
2001 PRODUCTION DRIVE
Louisville, KY 40299
For additional support: Crosley Radio Consumer Service Department
24 hours a day / 7 days a week
Telephone: 1.888.CROSLEY (1.888.276.7539)
There are no express warranties except as listed above.
The purchaserî‚’s bill of sale is the only proof of warranty entitlement.
This warranty gives the purchaser specified legal rights in addition to any rights which
may vary from state to state.
In accordance with the î‚“Moss-Magnuson Warranty Actî‚” of July 10, 1975, this is termed
a î‚“limited warrantyî‚” which in no way compromises Crosley Radioî‚’s high standards of
quality and workmanship.
TroubleshootingTroubleshootingTroubleshooting
There is no power
1 Make sure radio is plugged in correctly.
2Look at the STAND BY INDICATOR and check
to see if it is red.
3If the red light is on, press the buttonPOWER
/ to turn the unit on.
There is no sound
1Make sure the mute function is turned off.
2Check that the volume is turned up by pressing
VOLUME UP button / on the remote.
Note: Volume range on some units start at
level 15 and ends at level 40.
3Make sure INT./EXT. switch on back of radio
is switched to INT. (Unless you are using
external speakers, in which case it should be
on EXT. )
4Check to make sure power is turned on.
CD does not play
1Check to make sure CD is inserted correctly
(label side facing up).
2Check to see that surface of CD is clean.
3Make sure function switch is set to CD mode.
USB - There is no music playing when
PLAY/PAUSE (USB) is pressed.
1Make sure the MP3 device/Flash Drive has
stored music files.
2The unit will only play Flash Drives up to
512 î‚– 4096 Bytes
3Reset USB by switching the unit Off or switching
to another Mode.
4Check if the file(s) is WMA file(s). The unit
does not play WMA format, only MP3 format.
Remote not working
1Replace battery.
2Be sure to point the remote towards remote
sensor when operating.
3. Remove obstacles in the path of the remote
and radio so the remote signal has a straight
path to the radio.
Turntable will not work
1Check it the AC Power source is connected.
2Press the button / POWER (on front of unit
or on RC) to turn the unit on, the STAND BY
INDICATOR light should be off.
3Check that the unit is in PHONO Mode. Try
moving the Tone Arm to the right until a click
is heard.
No Sound is coming from the unit
1The white protective needle cover has not
been removed
2The Volume is not turned up
The Tone Arm will not move
1. The black tie-wrap has not been removed from
underneath Tone Arm .
2. Tone Arm hold down clip has not been released
Trademarks î‚– MPEG Layer-3 audio coding
technology licensed from Fraunhofer IIS and
Thomson
There is no power
1 Make sure radio is plugged in correctly.
2Look at the STAND BY INDICATOR and check
to see if it is red.
3If the red light is on, press the buttonPOWER
/ to turn the unit on.
There is no sound
1Make sure the mute function is turned off.
2Check that the volume is turned up by pressing
VOLUME UP button / on the remote.
Note: Volume range on some units start at
level 15 and ends at level 40.
3Make sure INT./EXT. switch on back of radio
is switched to INT. (Unless you are using
external speakers, in which case it should be
on EXT. )
4Check to make sure power is turned on.
CD does not play
1Check to make sure CD is inserted correctly
(label side facing up).
2Check to see that surface of CD is clean.
3Make sure function switch is set to CD mode.
USB - There is no music playing when
PLAY/PAUSE (USB) is pressed.
1Make sure the MP3 device/Flash Drive has
stored music files.
2The unit will only play Flash Drives up to
512 î‚– 4096 Bytes
3Reset USB by switching the unit Off or switching
to another Mode.
4Check if the file(s) is WMA file(s). The unit
does not play WMA format, only MP3 format.
Remote not working
1Replace battery.
2Be sure to point the remote towards remote
sensor when operating.
3. Remove obstacles in the path of the remote
and radio so the remote signal has a straight
path to the radio.
Turntable will not work
1Check it the AC Power source is connected.
2Press the button / POWER (on front of unit
or on RC) to turn the unit on, the STAND BY
INDICATOR light should be off.
3Check that the unit is in PHONO Mode. Try
moving the Tone Arm to the right until a click
is heard.
No Sound is coming from the unit
1The white protective needle cover has not
been removed
2The Volume is not turned up
The Tone Arm will not move
1. The black tie-wrap has not been removed from
underneath Tone Arm .
2. Tone Arm hold down clip has not been released
Trademarks î‚– MPEG Layer-3 audio coding
technology licensed from Fraunhofer IIS and
Thomson
There is no power
1 Make sure radio is plugged in correctly.
2Look at the STAND BY INDICATOR and check
to see if it is red.
3If the red light is on, press the buttonPOWER
/ to turn the unit on.
There is no sound
1Make sure the mute function is turned off.
2Check that the volume is turned up by pressing
VOLUME UP button / on the remote.
Note: Volume range on some units start at
level 15 and ends at level 40.
3Make sure INT./EXT. switch on back of radio
is switched to INT. (Unless you are using
external speakers, in which case it should be
on EXT. )
4Check to make sure power is turned on.
CD does not play
1Check to make sure CD is inserted correctly
(label side facing up).
2Check to see that surface of CD is clean.
3Make sure function switch is set to CD mode.
USB - There is no music playing when
PLAY/PAUSE (USB) is pressed.
1Make sure the MP3 device/Flash Drive has
stored music files.
2The unit will only play Flash Drives up to
512 î‚– 4096 Bytes
3Reset USB by switching the unit Off or switching
to another Mode.
4Check if the file(s) is WMA file(s). The unit
does not play WMA format, only MP3 format.
Remote not working
1Replace battery.
2Be sure to point the remote towards remote
sensor when operating.
3. Remove obstacles in the path of the remote
and radio so the remote signal has a straight
path to the radio.
Turntable will not work
1Check it the AC Power source is connected.
2Press the button / POWER (on front of unit
or on RC) to turn the unit on, the STAND BY
INDICATOR light should be off.
3Check that the unit is in PHONO Mode. Try
moving the Tone Arm to the right until a click
is heard.
No Sound is coming from the unit
1The white protective needle cover has not
been removed
2The Volume is not turned up
The Tone Arm will not move
1. The black tie-wrap has not been removed from
underneath Tone Arm .
2. Tone Arm hold down clip has not been released
Trademarks î‚– MPEG Layer-3 audio coding
technology licensed from Fraunhofer IIS and
Thomson
USB Specification
The exclamation point
within an equilateral
triangle is intended to
alert user to the
presence of important
operating and
maintenance (servicing)
instruction in the
literature accompanying
the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
The lighting flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert user to
the presence of uninsulated
"dangerous voltage" within
the product's enclosure
that may be of sufficient
magnitude to constitute
risk of electric shock
to persons.
CAUTION: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER (OR BACK). NO
USER - SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE. DO NOT REMOVE COVER. PILOT LAMPS SOLDERED IN
PLACE. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
* DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
Interface
- USB 2.0 Full speed, HOST (USB HUB is not supported)
Corresponding Flash memory
- Compatible with MPEG Audio 1, 2, 2.5
- Compatible with Layer 1, 2, 3
- Compatible with Bit rate: 128 î‚– 320 Kbps
- Subfolder nest : 8 levels
- Number of track / titles max 999
- Support ID3 tag V2.0
Specification
Frequency Range : AM 520 - 1710 KHz
: FM 87.5 - 108 MHz
USB Port 2.0 : Full Speed Support FAT16, FAT32)512MB - 4GB (
Power Consumption : 23W
Antennas : External FM antenna wire
: Built-in ferrite AM bar
Power Source : AC Adaptor DC 12V,1000mA
Speaker Size : 4î‚” Dynamic type x 2
Speaker Ohm : 4 Ohm
Speaker Watt : 5W
Power Output : 2W x 2
Replacement needle : NP1
12
General


Product specificaties

Merk: Crosley
Categorie: Platenspeler
Model: CR7002A Troubadour

Heb je hulp nodig?

Als je hulp nodig hebt met Crosley CR7002A Troubadour stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Platenspeler Crosley

Handleiding Platenspeler

Nieuwste handleidingen voor Platenspeler