Crestron TSW-760-B-S Handleiding

Crestron Kassa TSW-760-B-S

Lees hieronder de 📖 handleiding in het Nederlandse voor Crestron TSW-760-B-S (2 pagina's) in de categorie Kassa. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

The Crestron® TSW-560, TSW-760, and TSW-1060 are stylish and

versatile wall mount touch screens. The touch screen features

onboard voice recognition, web browsing, Smart Graphics® software

technology, H.264 streaming video, a built-in camera, a Rava® SIP

intercom, and PoE+ (Power over Ethernet+) network power. The touch

screen also provides various built-in applications for room scheduling,

conferencing, and home control.

NOTE: Voice recognition, the built-in camera, and the Rava SIP

intercom are not available on the TSW-560-NC, TSW-760-NC, and

TSW-1060-NC models.

The Crestron TSW-560, TSW-760, and TSW-1060 are functionally

similar. For simplicity within this guide, the term “touch screen” is used

except where noted.

Check the Box

Item Qty

TSW-560, TSW-760, or TSW-1060* 1

Latch, Security (P/N 4525305) 1

TSW-560 Only

Bracket, Preconstruction (P/N 4524592) 1

Bracket, Universal Mounting (P/N 4525127) 1

TSW-760 or TSW-1060 Only

Bracket, Mounting (P/N 4525352) 1

Screw, 6-32 x 3/4 in., Undercut Head, Phillips (P/N 2033247) 4

Screw, M3 x 16 mm, Flat Head, Phillips (P/N 2013788) 4

Screw, M3.5 x 25 mm, Flat Head, Phillips (P/N 2023756) 2

* Refer to the TSW-560-B-S, TSW-760-B-S, and TSW-1060-B-S product page

at for a complete list of color and texture variations.www.crestron.com

Install the TSW-560 Mounting Bracket

The TSW-560 can be mounted into drywall and other surfaces, or it

can be mounted onto a wall stud. When mounted into drywall and

other surfaces, the touch screen protrudes 1/2 in. (13 mm) from the

mounting surface.

To install the TSW-560 mounting bracket in preconstruction

applications, use standard drywall nails or screws (not included) to

attach the included TSW-UMB-60-PMK preconstruction mounting

bracket to a wall stud.

TSW-UMB-60-PMK

Use a tie wrap to hold the

cable until the TSW-560 is

mounted.

NOTE: Allow an air gap of at least 12 in. (305 mm) in the wall cavity

above and below the TSW-560 for heat dissipation.

To install the TSW-560 mounting bracket in postconstruction

applications:

1. Use the TSW-UMB-60-PMK as a cutout template by turning

the bracket to face the wall, ensuring it is level, and temporarily

tacking it to the wall with finishing nails (not included) through

the smaller holes around the cutout opening.

2. Trace the cutout opening with an appropriate drywall saw.

TSW-UMB-60

3. Loosen the two screws on the included TSW-UMB-60 universal

mounting bracket.

4. Install the TSW-UMB-60, bottom side first, into the opening.

Push the top surface

downward to install

the bottom half first.

TSW-UMB-60

(side view)

Loosen both

of the screws.

5. Push the rear half of the mounting bracket back so that it is

seated behind the mounting surface completely.

6. Ensure the front of the TSW-UMB-60 is level, and then tighten

the two bracket screws to complete the installation.

CAUTION: To avoid damaging the bracket, do not overtighten

the screws.

Push the rear half back.

Ensure the front is level, and

then tighten both screws.

Install the TSW-760/TSW-1060 Mounting

Bracket

The TSW-760 and TSW-1060 install over a standard 2-gang or 3-gang

U.S. electrical box, a 2-gang European electrical box, or a 2-gang U.K.

electrical box. The touch screen may also be installed into wooden

paneling or furniture with a 2-1/5 in. (56 mm) high by 3-3/4 in. (96 mm)

wide rectangular cutout. When installed, the touch screen protrudes

1/2 in. (13 mm) from the mounting surface, leaving no visible screws.

NOTES:

• Additional mounting options are possible by using the

TSW-UMB-60 universal mounting bracket, the

TSW-UMB-60-PMK preconstruction mounting kit, the

TSW-UMB-60-BBI back box, or the TSW-760/1060-MSMK

multisurface mount kit. For more information, refer to the

product pages on the Crestron website.

• Installing the mounting bracket to an electrical box is required

only if one of the mounting solutions above is not used. For more

information, refer to the mounting solution documentation at

www.crestron.com/manuals.

To mount the touch screen into an electrical box, use the appropriate

screws (four 6-32 x 3/4 in. screws, four M3 x 16 mm screws, or two

M3.5 x 25 mm screws) to attach the mounting bracket to the electrical

box as shown in the following illustrations.

NOTE: For U.S.-style installations, use a #2 Phillips screwdriver. For

European or U.K.-style installations, use a #1 Phillips screwdriver or its

equivalent.

• For U.S.-style installations, use the four 6-32 x 3/4 in. screws.

Mounting

bracket

Screws (4):

6-32 x 3/4 in.

2-gang U.S.

electrical box

• For European-style installations, use the four M3 x 16 mm

screws.

Mounting

bracket

Screws (4):

M3 x 16 mm

2-gang European

electrical box

• For U.K.-style installations (not pictured), use the two M3.5 x 25

mm screws to attach the mounting bracket to the electrical box.

Insert the screws through the center openings in the left and

right sides of the mounting bracket.

Install the Security Latch (Optional)

The included security latch may be attached to the touch screen so

that it cannot be easily removed from the mounting bracket after

installation.

To install the security latch, use a small Phillips screwdriver to screw

the security latch to the top of the touch screen rear housing before

the touch screen is inserted into the mounting bracket.

Touch

screen

Security

latch

Connect the Touch Screen

Route all necessary cables through the rear of the electrical box, and

then make connections to the touch screen as shown in the illustration

below.

LAN PoE:

10BASE-T / 100BASE-TX

Ethernet to LAN

USB:

To LED accessories

Reset button

Observe the following when connecting the touch screen:

• Use Crestron power supplies for Crestron equipment.

• Power and data connection is provided to the touch screen by

a single Ethernet cable. A Crestron PoE (Power over Ethernet)

power supply, such as the PWE-4803RU, or a PoE-capable

network switch is recommended (both not included).

• The USB port is used to connect compatible Crestron LED

accessories to the touch screen.

NOTE: The TSW-760 may use either PoE or PoE+ to supply power

to compatible LED accessories over USB; the TSW-1060 must

use only PoE+ to supply power to LED accessories over USB.

• Apply power after all connections have been made.

Install the Touch Screen

Once all connections have been made, push the touch screen gently

into the mounting bracket so that the touch screen rear housing is

secured within the center opening in the mounting bracket.

Touch screen

Mounting

bracket

If the touch screen is not level after installation, pull it out of the

mounting bracket and loosen the screws holding the bracket into place.

This procedure allows the mounting bracket to be rotated slightly.

Once the mounting bracket has been repositioned, retighten the

screws, reinstall the touch screen into the bracket, and ensure that the

touch screen is now level.

TSW-560/TSW-760/TSW-1060

5 in., 7 in., and 10.1 in. Touch Screens

Remove the Touch Screen

To remove the touch screen after installation, carefully pull the touch

screen away from the wall until it disengages from the mounting

bracket.

To remove the touch screen if the security latch has been installed:

1. Pull the touch screen away from the wall until the security latch

makes contact with the mounting bracket.

2. Insert a flat-head screwdriver into the slot on the security latch

and rotate the latch into the open position, which retracts the

security latch arms.

3. With the arms retracted, pull on the touch screen to disengage it

from the mounting bracket.

Security

latch

Mounting

bracket

(top view)

Touch

screen

Insert the

screwdriver

here.

NOTE: There is a small amount of “play” in the bracket mounting, which

allows room to insert the screwdriver.

Configure the Device

When power is applied for the first time, the following screen is

displayed. The touch screen may take up to two minutes to boot.

Touch the screen to display the main Setup screen (TSW-1060 shown).

Device settings for the touch screen may be configured using the

built-in setup screens or the web configuration interface. For more

information on configuring the touch screen, refer to the

TSW-560/TSW-760/TSW-1060 Supplemental Guide (Doc. 7927)

at www.crestron.com/manuals.

Access the Device Setup Screens

To access the built-in setup screens for configuring device settings, do

either of the following:

• Place five fingers on the display and hold for 15 seconds.

• Press the hard keys labeled in the illustration below as 1, 2, 3, and

4 twice, in this sequence, within five seconds.

Use the setup screens to configure various settings for the touch

screen, including Ethernet setup, IP table setup, audio setup, display

setup, standby timeout, and diagnostics.

Access the Web Configuration Interface

The touch screen also provides a web configuration interface that is

used to view and configure various touch screen settings and to select

an application. The interface can be accessed using the touch screen IP

address or the Crestron XiO Cloud™ service.

Touch Screen IP Address

To access the web configuration interface using the touch screen IP

address:

1. Ensure that the touch screen is connected to the network.

2. Use the Device Discovery tool in Crestron Toolbox™ software to

discover the touch screen and its IP address on the network.

3. Enter the touch screen IP address into a web browser.

Crestron XiO Cloud Service

The Crestron XiO Cloud service allows supported Crestron devices

across an enterprise to be managed and configured from one central

and secure location in the cloud. Supported devices are configured to

connect to the service. Use of the service requires a registered

Crestron XiO Cloud account.

NOTE: The device may be disconnected from the service by navigating

to the tab in Crestron Toolbox software ( > Cloud Services Functions

Device Info > Cloud Services). For details, refer to the Crestron Toolbox

help file.

To access the web configuration interface using the Crestron XiO Cloud

service:

1. Record the MAC address and serial number that are labeled on

the shipping box or rear panel of the device. The MAC address and

serial number are required to add the device to the service.

2. Do either of the following:

• For existing accounts, access the Crestron XiO Cloud service

at https://portal.crestron.io.

• For new accounts, register for a Crestron XiO Cloud account

at .www.crestron.com/xio-cloud-registration

3. Claim the device to the service as described in the Crestron XiO

Cloud User Guide (Doc. 8214) at .www.crestron.com/manuals

4. Select the device from the cloud interface to view its settings.

Set the Time Zone

The time zone must be set on the touch screen if it will not be paired

with a control system IP table.

To set the time zone:

1. Access the web configuration interface using either the touch

screen IP address or the Crestron XiO Cloud service.

2. Navigate to > .Settings Configure Date/Time

3. Select the time zone where the touch screen will be used from the

Time Zone drop-down menu.

4. Click Save Changes on the top right of the screen.

Select an Application

The touch screen ships with a selection of built-in applications. An

application may be selected from the splash screen that displays after

power is applied to the touch screen for the first time.

NOTE: Applications can be selected and configured from the device

setup screens or from the web configuration interface at any time. For

more information on configuring applications, refer to the

TSW-560/TSW-760/TSW-1060 Supplemental Guide (Doc. 7927).

To select a touch screen application:

1. Tap the Touch Here to Enable a Specific Application bar on the

bottom of the splash screen. Refer to the first image in the

“Configure the Device” section.

2. Select the desired touch screen application from the Choose

Application Below menu that is displayed.

3. Click . The touch screen reboots to display the user Confirm

interface for the selected application.

NOTE: If a custom user project will be used in place of an application,

tap . Custom projects can be uploaded using the web User Project

configuration interface or Crestron Toolbox software.

Additional Information

Scan or click the QR code for detailed product information.

TSW-560-B-S TSW-760-B-S TSW-1060-B-S

Compliance and Legal

Original Instructions: The U.S. English version of this document is the original instructions. All

other languages are a translation of the original instructions.

Regulatory Models: TSW-560 TSW-760 TSW-1060

As of the date of manufacture, the product has been tested and found to comply with

specifications for CE marking.

This product is Listed to applicable UL® Standards and requirements tested by Underwriters

Laboratories Inc.

Ce produit est homologué selon les normes et les exigences UL applicables par Underwriters

Laboratories Inc.

Federal Communications Commission (FCC) Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following

conditions: (1) This device may not cause harmful interference and (2) this device must accept

any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the manufacturer responsible

for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Industry Canada (IC) Compliance Statement

CAN ICES-3 (B)/NMB-3(B)

根據NCC低功率電波輻射性電機管理辦法規定:

第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變

更原設計之特性及功能。

第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善

至無干擾時方得繼續使用。

前項合法通信，指依電信法規定作業之無線電通信。

低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

Crestron product development software is licensed to Crestron dealers and Crestron Service

Providers (CSPs) under a limited non-exclusive, non-transferable Software Development

Tools License Agreement. Crestron product operating system software is licensed to Crestron

dealers, CSPs, and end-users under a separate End-User License Agreement. Both of these

Agreements can be found on the Crestron website at www.crestron.com/legal/software_

license_agreement.

The product warranty can be found at www.crestron.com/warranty.

The specific patents that cover Crestron products are listed at www.crestron.com/legal/

patents.

Certain Crestron products contain open source software. For specific information, please visit

www.crestron.com/opensource.

Crestron, the Crestron logo, Crestron Toolbox, Crestron XiO Cloud, Rava, and Smart Graphics

are either trademarks or registered trademarks of Crestron Electronics, Inc., in the United

States and/or other countries. UL and the UL logo are either trademarks or registered

trademarks of Underwriters Laboratories, Inc. in the United States and/or other countries.

Other trademarks, registered trademarks, and trade names may be used in this document to

refer to either the entities claiming the marks and names or their products. Crestron disclaims

any proprietary interest in the marks and names of others. Crestron is not responsible for

errors in typography or photography.

Crestron Electronics, Inc.

15 Volvo Drive, Rockleigh, NJ 07647

Tel: 888.CRESTRON

Fax: 201.767.7576

www.crestron.com

Quick Start - Doc. 7926G

(2053121)

04/03/20

Specifications subject to

change without notice

Product specificaties

Merk:	Crestron
Categorie:	Kassa
Model:	TSW-760-B-S
Kleur van het product:	Zwart
Gewicht:	400 g
Breedte:	194 mm
Diepte:	39 mm
Hoogte:	122 mm
Beeldschermdiagonaal:	7 "
Resolutie:	1024 x 600 Pixels
Touchscreen:	Ja
Oorspronkelijke beeldverhouding:	17:10
Ethernet LAN:	Ja
Kijkhoek, horizontaal:	160 °
Kijkhoek, verticaal:	160 °
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	MicroSD (TransFlash), MicroSDHC
Typische contrastverhouding:	1100:1
Touch technologie:	Multi-touch
Helderheid:	350 cd/m²
Aantal USB 2.0-poorten:	1
Aantal Ethernet LAN (RJ-45)-poorten:	1
Certificering:	UL / cUL, IC, CE, FCC Part 15 Class B
Beeldscherm, aantal kleuren:	16.78 miljoen kleuren
Intern geheugen:	2 GB
Intern geheugentype:	DDR3L-SDRAM
Opslagmedia-type:	eMMC
Beeldverhouding:	17:10
Schermdiameter in centimeters:	17.8 cm
Ethernet LAN, data-overdrachtsnelheden:	10, 100 Mbit/s
Backlight type:	Edge LED
Soort paneel:	TFT
Totale opslagcapaciteit:	4 GB
Type behuizing:	Alles-in-een
Hoeveelheid simultane aanraakpunten:	5
Touchscreen technologie:	Projected capacitive-systeem
Ondersteunde protocollen:	TCP/IP, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP, IEEE 802.1X, SNMP, IPv4 / IPv6
Bedrijfstemperatuur (T-T):	0 - 45 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
Type beeldscherm:	TFT