Craftsman CMCA320 Handleiding
Craftsman
Boormachine
CMCA320
Lees hieronder de š handleiding in het Nederlandse voor Craftsman CMCA320 (6 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 73 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US.
POUR TOUTE QUESTION OU TOUT COMMENTAIRE, NOUS CONTACTER.
SI TIENE DUDAS O COMENTARIOS, CONTĆCTENOS.
1-888-331-4569 WWW.CRAFTSMAN.COM
CMCA320
INSTRUCTION MANUAL GUIDE DāUTILISATION MANUAL DE INSTRUCTIONES
20V* Max Cordless Multi-Use Garden Tool
Outil de jardin multifonction sans fil 20 V* max
Herramienta para jardĆn multiusos inalĆ”mbrica 20V* Max
English
4
c ) Keep children and bystanders away while
operating a power tool. Distractions can cause you
to loseīcontrol.
2) Electrical Safety
a ) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electricīshock.
b ) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed orīgrounded.
c ) Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electricīshock.
d ) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electricīshock.
e ) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electricīshock.
f ) If operating a power tool in a damp location
is unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of a GFCI
reduces the risk of electricīshock.
3) Personal Safety
a ) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personalīinjury.
b ) Use personal protective equipment. Always wear
eye protection. Protective equipment such as a dust
mask, nonāskid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personalīinjuries.
c ) Prevent unintentional starting. Ensure the switch
is in the offāposition before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energizing power tools that have the switch
on invitesīaccidents.
d ) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result
in personalīinjury.
e ) Do not overreach. Keep proper footing and
balance at all times. This enables better control of the
power tool in unexpectedīsituations.
f ) Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewelry or long hair
can be caught in movingīparts.
GENERAL POWER TOOL SAFETY WARNINGS
īWARNING: Read all safety warnings, instructions,
illustrations and specifications provided with
this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
seriousīinjury.
SAVE ALL WARNINGS
AND INSTRUCTIONS FOR
FUTUREīREFERENCE.
The term āpower toolā in the warnings refers to your
mainsāoperated (corded) power tool or batteryāoperated
(cordless) powerītool.
1) Work Area Safety
a ) Keep work area clean and well lit. Cluttered or dark
areas inviteīaccidents.
b ) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust orīfumes.
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert
symbols and words to alert you to hazardous situations and
your risk of personal injury or propertyīdamage.
īDANGER: Indicates an imminently hazardous
situation which, if not avoided, result in will death or
seriousīinjury.
īWARNING: Indicates a potentially hazardous situation
which, if not avoided, result in could death or
seriousīinjury.
īCAUTION: Indicates a potentially hazardous situation
which, if not avoided, result in may minor or
moderateīinjury.
ī(Used without word) Indicates a safety relatedīmessage.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertyīdamage.
Intended Use
Your CRAFTSMAN CMCA320 has been designed for household,
consumer useīonly. This tool can be used to assist with:
āPlanting small trees, shrubs and flowers
āCultivating and preparing garden soil
āDigging holes for small posts or fencing
DO nOT use on ice.
DO nOT use to mix liquids, chemicals or paint.
DO nOT use under wet conditions or in presence of
flammable liquids orīgases.
DO nOT let children come into contact with the tool. Supervision
is required when inexperienced operators use thisītool.
ī
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
seriousīinjury.
WARNING: To reduce the risk of injury, read the
instructionīmanual.
English
6
READ ALL INSTRUCTIONS
Important Safety Instructions for All
Battery Packs
ī
WARNING: Read all safety warnings, instructions,
and cautionary markings for the battery pack,
charger and product. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or seriousīinjury.
ā¢ Do not charge or use the battery pack in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Inserting or removing the battery
pack from the charger may ignite the dust orīfumes.
ā¢ NEVER force the battery pack into the charger. DO
NOT modify the battery pack in any way to fit into a
nonācompatible charger as battery pack may rupture
causing serious personal injury.Consult the chart at the end
of this manual for compatibility of batteries andīchargers.
ā¢ Charge the battery packs only in
CRAFTSMANīchargers.
ā¢ DO NOT splash or immerse in water or otherīliquids.
ā¢ DO NOT allow water or any liquid to enter batteryīpack.
ā¢ Do not store or use the tool and battery pack in
locations where the temperature may reach or
exceed 104īĀ°F (40īĀ°C) (such as outside sheds or metal
buildings in summer). For best life store battery packs in
a cool, dryīlocation.
NOTE: Do not store the battery packs in a tool with
the trigger switch locked on. Never tape the trigger
switch in the ONīposition.
ā¢ Do not incinerate the battery pack even if it is severely
damaged or is completely worn out. The battery pack
can explode in a fire. Toxic fumes and materials are created
when lithiumāion battery packs areīburned.
ā¢ Do not expose a battery pack or appliance to ļ¬re or
excessive temperature. Exposure to ļ¬re or temperature
above 265īĀ°F (130īĀ°C) may causeīexplosion.
ā¢ Follow all charging instructions and do not charge the
battery pack or appliance outside of the temperature
range specified in the instructions. Charging improperly or
at temperatures outside of the specified range may damage
the battery and increase the risk ofīfire.
ā¢ If battery contents come into contact with the skin,
immediately wash area with mild soap and water. If
battery liquid gets into the eye, rinse water over the open
eye for 15īminutes or until irritation ceases. If medical
attention is needed, the battery electrolyte is composed of a
mixture of liquid organic carbonates and lithiumīsalts.
ā¢ Contents of opened battery cells may cause
respiratory irritation. Provide fresh air. If symptoms
persist, seek medicalīattention.
ā¢ Battery liquid may be flammable if exposed to spark
orīflame.
ā¢ Never attempt to open the battery pack for any
reason. If the battery pack case is cracked or
damaged, do not insert into the charger. Do not crush,
BATTERIES AND CHARGERS
The battery pack is not fully charged out of the carton.
Before using the battery pack and charger, read the
safety instructions below and then follow charging
proceduresīoutlined. When ordering replacement battery
packs, be sure to include the catalog number andīvoltage.
The label on your tool may include the following symbols. The
symbols and their definitions are asīfollows:
V ......................... volts
Hz hertz .......................
min minutes .....................
or DC direct current ......
...................... Class I Construction
(grounded)
ā¦/min .............. per minute
BPM ....................beats per minute
IPM ..................... impacts per minute
OPM .................... oscillations per
minute
RPM .................... revolutions per
minute
sfpm ................... surface feet per
minute
SPM .................... strokes per minute
A .........................amperes
W ........................watts
Wh ...................... watt hours
Ah .......................amp hours
or AC alternating current ...........
or AC/DC alternating or direct ....
current
...................... Class II Construction
(double insulated)
no ....................... no load speed
n ......................... rated speed
PSI....................... pounds per square
inch
...................... earthing terminal
..................... safety alert symbol
..................... visible radiation
do not stare into
the light
..................... wear respiratory
protection
..................... wear eye protection
..................... wear hearing
protection
..................... r
ead all documentation
.....................
do not expose to rain
dust to get into your mouth, eyes, or lay on the skin may
promote absorption of harmfulīchemicals.
ī
WARNING: Use of this tool can generate and/or
disperse dust, which may cause serious and permanent
respiratory or other injury. Always use NIOSH/OSHA
approved respiratory protection appropriate for
the dust exposure. Direct particles away from face
andībody.
īWARNING: Always wear proper personal hearing
protection that conforms to ANSI S12.6 (S3.19)
during use. Under some conditions and duration
of use, noise from this product may contribute to
hearingīloss.
īCAUTION:
When not in use, place tool on its side on
a stable surface where it will not cause a tripping or
falling hazard. Some tools with a large battery pack will
stand upright but may be easily knockedīover.
ā¢ Air vents often cover moving parts and should be avoided.
Loose clothes, jewelry or long hair can be caught in movingīparts.
Product specificaties
Merk: | Craftsman |
Categorie: | Boormachine |
Model: | CMCA320 |
Heb je hulp nodig?
Als je hulp nodig hebt met Craftsman CMCA320 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Boormachine Craftsman
9 Juli 2024
9 Juli 2024
9 Juli 2024
9 Juli 2024
9 Juli 2024
9 Juli 2024
9 Juli 2024
9 Juli 2024
28 Juni 2024
27 April 2023
Handleiding Boormachine
- Boormachine Bosch
- Boormachine IKEA
- Boormachine Panasonic
- Boormachine AEG
- Boormachine DeWalt
- Boormachine Baier
- Boormachine Basetech
- Boormachine Batavia
- Boormachine Bavaria
- Boormachine Berner
- Boormachine Black Decker
- Boormachine Blucave
- Boormachine Bort
- Boormachine Bruder Mannesmann
- Boormachine Defort
- Boormachine Delta
- Boormachine Dremel
- Boormachine Duro
- Boormachine Duro Pro
- Boormachine Ecomac
- Boormachine Economy
- Boormachine Einhell
- Boormachine Elu
- Boormachine Fe Powertools
- Boormachine Fein
- Boormachine Felisatti
- Boormachine Ferm
- Boormachine Ferrex
- Boormachine Festool
- Boormachine Flex
- Boormachine Gamma
- Boormachine Global
- Boormachine Goon
- Boormachine Gude
- Boormachine Hikoki
- Boormachine Hitachi
- Boormachine Holzmann
- Boormachine Huvema
- Boormachine Hyundai
- Boormachine Kawasaki
- Boormachine Kinzo
- Boormachine Kress
- Boormachine Laserliner
- Boormachine Lux Tools
- Boormachine Luxor
- Boormachine Maestro
- Boormachine Makita
- Boormachine Maktec
- Boormachine Max
- Boormachine Metabo
- Boormachine Milwaukee
- Boormachine Parkside
- Boormachine Powerfix
- Boormachine Powerplus
- Boormachine Profitech
- Boormachine Protool
- Boormachine Robust
- Boormachine Rupes
- Boormachine Ryobi
- Boormachine Scheppach
- Boormachine Silverline
- Boormachine Skil
- Boormachine Sparky
- Boormachine Spit
- Boormachine Stanley
- Boormachine Stihl
- Boormachine Stomer
- Boormachine Tanaka
- Boormachine Texas
- Boormachine Toolcraft
- Boormachine Toolland
- Boormachine Topcraft
- Boormachine Trotec
- Boormachine Varo
- Boormachine Velleman
- Boormachine Vonroc
- Boormachine Westfalia
- Boormachine Workzone
- Boormachine Worx
- Boormachine Wurth
- Boormachine Zipper
- Boormachine Ozito
- Boormachine Clas Ohlson
- Boormachine Black And Decker
- Boormachine Steren
- Boormachine Cocraft
- Boormachine Meec Tools
- Boormachine Genesis
- Boormachine Carat
- Boormachine Eibenstock
- Boormachine Hilti
- Boormachine Cotech
- Boormachine Power Craft
- Boormachine Tacklife
- Boormachine Truper
- Boormachine Festo
- Boormachine Fieldmann
- Boormachine Mafell
- Boormachine Proxxon
- Boormachine Biltema
- Boormachine Malmbergs
- Boormachine Porter-Cable
- Boormachine Sun Joe
- Boormachine Dedra
- Boormachine Graphite
- Boormachine Narex
- Boormachine RIDGID
- Boormachine Tryton
- Boormachine Herkules
- Boormachine MSW
- Boormachine Sthor
- Boormachine Rikon
- Boormachine Cecotec
- Boormachine Verto
- Boormachine Alpha Tools
- Boormachine Hazet
- Boormachine G-Technology
- Boormachine Yato
- Boormachine Total
- Boormachine Stalco
- Boormachine Baumr-AG
- Boormachine Powerblade
- Boormachine Meister Craft
- Boormachine King Craft
- Boormachine Max Bahr
- Boormachine Toolson
- Boormachine Wolfcraft
- Boormachine Kreg
- Boormachine Rok
- Boormachine Netter Vibration
- Boormachine RUKO
- Boormachine Einhell Bavaria
- Boormachine McKenzie
- Boormachine Proviel
- Boormachine Ribimex
- Boormachine Ergotools Pattfield
- Boormachine MyTool
- Boormachine Rodcraft
- Boormachine Bavaria By Einhell
- Boormachine Handwerk
Nieuwste handleidingen voor Boormachine
21 December 2024
16 December 2024
8 December 2024
8 December 2024
8 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
5 December 2024