Cotech 92502 Handleiding

Cotech Zaagmachine 92502

Lees hieronder de 📖 handleiding in het Nederlandse voor Cotech 92502 (108 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/108
Important!
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den innan
du använder utrustningen och spara den för
framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre deg
om at du forstår dem før du bruker enheten
og oppbevar dem for senere bruk.
Tärkeätä tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin alat
käyttää laitetta. Säilytä ohjeet myöhempää
tarvetta varten.
Art.no Model
18-3068 92502-UK
30-9869 92502
ENGLISHSVENSK ANORSKSUOMI
Combination Saw
Kombinationssåg
Kombinasjonssag
Yhdistelmäsaha
Ver. 201103
Original instructions
Bruksanvisning i original
Original bruksanvisning
Alkuperäinen käyttöohje
2
ENGLISH
Combination Saw
Art.no: 18-3068 Model: 92502-UK
30-9869 92502
Please read the entire instruction manual before using the product and save it for future reference.
We apologise for any text or photographic errors and any changes of technical data. If you have any
questions concerning technical problems please contact our Customer Service Department (see address
on reverse.)
!
Important safety instructions:
Read the entire instruction manual before using this product.
1. Safety
Warning: When using this machine all basic safety precautions must be followed to avoid the risk of re,
electrocution and personal injury. Read these instructions carefully before using the product and keep them
for future reference.
1. Keep the working area tidy. Cluttered areas and benches invite accidents.
2. Take stock of your working environment. Do not expose the machine to rain. Do not use the machine in moist
or wet areas. Keep the working area well lit. Never operate the machine near ammable liquid or gas.
3. Avoid electric shocks. Avoid body contact with earthed objects, such as pipes, radiators, ovens or refrigerators.
4. Keep other people at a safe distance. Do not allow anyone not involved in the work process to touch the
machine or its electric cable, especially children. Keep all bystanders at a distance.
5. Store the machine in a safe place. When your machines are not in use, keep them in a locked, dry area, away
from children.
6. Do not overload the machine. The correct feed rate makes the work better and safer.
7. Use the correct machine. Do not try to use small machines to perform jobs requiring more powerful machines.
Do not use a machine for a purpose for which it was not designed, e.g. using a circular saw for lopping
branches off trees or cutting timber.
8. Wear suitable clothing. Do not wear loose-tting clothing or jewellery, they could get caught in moving parts.
Non-slip shoes are recommended for outdoor work. Wear a hairnet or similar if you have long hair.
9. Always use safety glasses. Wear safety glasses. Use a face mask or dust lter when working in dusty
environments.
10. Use dust extractors. If the machine is equipped with or connected to a dust extractor/collector, make sure that
it is turned on and used correctly.
11. Do not abuse the lead. Do not jerk the lead, grip the plug itself when disconnecting the power. Make sure that
the mains lead does not come into contact with heat, oil, or sharp edges.
12. Secure the workpiecermly. If possible use vices or clamps to hold the workpiece in place. This is much safer
than holding the workpiece in one hand.
13. Do not overreach. Make sure that you stand steady and balanced all times.
14. Look after the machine. Keeping the machine clean and the blades sharp will ensure the best results. Follow
the manuals advice regarding lubrication and the replacement of accessories. Regularly inspect the power
lead. If it damaged it should be replaced by a qualied service technician. Regularly inspect all extension leads
for any damage. Keep the handles of the machine and all controls and switches dry and free from oil and
grease.
3
ENGLISH
15. Turn the power off. Pull out the plug and push in the emergency stop button before servicing or changing
any blades, drill bits, cutters or sanding discs.
16. Remove all spanners and repair tools. Make a habit of checking to make sure that the machine is free of
all spanners and tools before turning the power on.
17. Avoid accidental starting. Do not walk around with the machine with your nger on the power button if it
is plugged in. Make sure that the on/off switch is set to OFF before plugging in any power tool.
18. Use the correct extension leads. If you use extension leads outdoors, only use those designed for
outdoor use. Only use extension leads with thick enough diameter core wires and roll out the whole lead.
19. Use common sense and be careful. Think before carrying out any task, so that it is carried out safely.
Never operate machines when you are tired, under the inuence of medicine etc.
20. Check the following before turning the machine on:
• That all guards and other parts are whole and in working order.
• That moving parts are free and correctly aligned.
• That no moving parts can get caught.
• That no defects are apparent.
• Other factors that can inuence work execution.
• A safety guard or any other part that is damaged should be repaired by a tradesman or replaced.
Damaged power leads and switches must always be replaced by a tradesman or qualied service
centre. Never operate the machine if you cannot stop or start the tool safely.
21. Use only recommended accessories. The use of non-recommended accessories can cause accidents
and personal injury.
22. Should only be repaired by a qualied technician. This machine conforms to current safety requirements.
Repairs to the machine should only be carried out by a tradesman using original spares; otherwise the
machine could cause accidents and personal injury.
1.2 . Safety Instructions Specific to Combination Saws
Warning: Always unplug the machine before carrying out any maintenance or changing the blade.
Helpful Suggestions:
• Working with wood can be dangerous if the correct procedures are not observed.
• Using the saw with common sense and caution will greatly reduce the risk of personal injury.
• Safety devices such as guards, push-sticks, clamps, safety goggles, dust masks and ear defenders
can never make up for bad judgement, carelessness or inattentiveness.
• you are responsible for your own safety. The saw has been designed to perform certain Remember:
tasks. We strongly recommend that the saw is not altered in any way and that it is not used for
performing any task for which it was not designed.
• DO NOT USE THE SAW if you are unsure if the saw can perform the task you intend to perform.
Make sure that all the parts are working properly and that the safety devices are in place before starting
the saw.
1. Warning: Use only cross-cut saw blades. Make sure that TCT blades have negative rake. Do not use
blades with deep spacing between the teeth because the teeth might bend and come into contact with
the blade guard. A damaged blade should be replaced immediately.
2. Do not use the saw unless it has been completely assembled using the instructions in this manual.
Check that the motor and the blade are rotating the right way (see direction arrow on blade guard). Make
sure that the blade does not come into contact with the table in any of the settings. Unplug the machine
and manually tilt the blade to 45° and 90°. Adjust the saw head if necessary.
3. If you do not understand how the saw should be used, ask a knowledgeable person for advice.

Product specificaties

Merk: Cotech
Categorie: Zaagmachine
Model: 92502

Heb je hulp nodig?

Als je hulp nodig hebt met Cotech 92502 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Zaagmachine Cotech

Cotech

Cotech 92502W Handleiding

10 Mei 2023
Cotech

Cotech PS002-S Handleiding

11 April 2023
Cotech

Cotech LS400 Handleiding

31 Maart 2023
Cotech

Cotech 92502 Handleiding

29 Maart 2023
Cotech

Cotech JFB10 Handleiding

29 Maart 2023
Cotech

Cotech YT4646 Handleiding

21 Maart 2023
Cotech

Cotech MJ10250IV Handleiding

9 Maart 2023
Cotech

Cotech YT4755 Handleiding

12 Februari 2023
Cotech

Cotech M1Q-65D Handleiding

3 Februari 2023
Cotech

Cotech JS 18 Handleiding

16 Januari 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Shindaiwa

Shindaiwa 269TS Handleiding

19 November 2024
Shindaiwa

Shindaiwa 320TS Handleiding

19 November 2024
Shindaiwa

Shindaiwa 488 Handleiding

19 November 2024
Shindaiwa

Shindaiwa 352s Handleiding

19 November 2024
Ergotools Pattfield

Ergotools Pattfield E-PST 800 L Handleiding

19 November 2024
Bavaria By Einhell

Bavaria By Einhell Bavaria BFS 600 E Handleiding

19 November 2024
Bavaria By Einhell

Bavaria By Einhell Bavaria BSTL 800 Profi Handleiding

19 November 2024
Proviel

Proviel STL 800 Handleiding

19 November 2024
Proviel

Proviel PVBK 40 Handleiding

19 November 2024
Proviel

Proviel PVKS 38/40 B Handleiding

19 November 2024