Connection SLI2.2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Connection SLI2.2 (20 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
OWNER’S MANUAL
OWNER’S MANUAL
OWNER’S MANUAL
OWNER’S MANUALOWNER’S MANUAL
SLI 2.2 - SLI 4.2
connection.eu
3
WARNING
WARNING
WARNING
WARNINGWARNING
• Before you start your installation, make sure you carefully read and understand all instructions.
Disregarding them might cause accidental harms or damage your devices.
• The vehicle electric system must have 12 VDC voltage with negative to ground. Make sure
 yourcarhasitinordertoavoidanydamagestoyouramplierandtothevehicle.
• Install the device in the vehicle parts where temperature is between 0° C (32° F) and 55° C (131° F).
• Make sure the location you chose for the components does not affect the correct functioning
of the vehicle mechanical and electric devices.
• Do not run the cables or install the device next to electronic gearcases.
• Always wear protective eyewear when using tools that may generate splinters.
• When installation is over, and before plugging the main power supply fuse, check the system
wiring and make sure all connections were done in the right way.
•Safetymustbeattherstplacewhiledriving.Listeningvolumemustnevercovernoisecomingfrom
the outside and from the vehicle, in order for you to be able to promptly face emergency situation.
•AlwaysinsulatetheconnectionbetweentheSLIandtheOEMheadunit/OEMamplierto
avoid damage them.
•AlwaysinsulatetheconnectionbetweentheSLIandthe+12Vpowersupplysystem(battery).
•Alwaysfuse+12VSLIcable(RED)with1Afusetoavoidanydamagetothevehicleelectrical
 systemandoreventofre.
Elettromediawillnotbeliableforthedirectorindirectdamagesduetoawronguseorawrong
connection of the device.


Product specificaties

Merk: Connection
Categorie: Niet gecategoriseerd
Model: SLI2.2

Heb je hulp nodig?

Als je hulp nodig hebt met Connection SLI2.2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Connection

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo

Festo VPPI Handleiding

21 November 2024
Festo

Festo SFAB Handleiding

21 November 2024
Festo

Festo SFAH Handleiding

21 November 2024
Festo

Festo DRRD-12 Handleiding

21 November 2024
Festo

Festo SDE3 Handleiding

21 November 2024
Festo

Festo SFTE Handleiding

21 November 2024
Festo

Festo CRVZS-5 Handleiding

21 November 2024