Compex CoreBelt 3.0 Handleiding

Compex Niet gecategoriseerd CoreBelt 3.0

Lees hieronder de 📖 handleiding in het Nederlandse voor Compex CoreBelt 3.0 (24 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/24

QUICK

START

GUIDE

COREBELT 1.0

COREBELT 3.0

COREBELT 5.0

GUIDE DE DÉMARRAGE RAPIDE

GUÍA DE INICIO RÁPIDO

GUIDA D’AVVIO RAPIDO

KURZANLEITUNG

BEKNOPTE HANDLEIDING

SNABBSTARTSGUIDE

PIKAOPAS ALOITUKSEEN

HURTIGSTARTSGUIDE

HURTIGVEILEDNING

GUIA DE INÍCIO RÁPIDO

SAFETY WARNING

It is strongly recommended to read all the instructions, contra-

indications and safety measures carefully before using the device.

The complete user manual can be found at www.compex.com

1. DEVICE DESCRIPTION

A On/o button or Pause button

during stimulation

B Power and battery LED indicator

C Program button (only available

on COREBELT 1.0), to select the

program P1 or P2

P1 rst LED solid green

P2 rst and second LED solid

green

D +/- intensity buttons, to increase

or decrease the stimulation

intensity

E Stimulation LED indicator

F Charger socket, plug in the USB

cable to charge the device

D D

A Holster

B Notches to facilitate the positioning of the belt on the back

C Elastic strap to avoid having any loose ends of the belt hanging down

D Metallic pins, electrodes must be positioned over these metal pins

E Self-fastening area to adjust the size of the belt

2. CHARGING THE DEVICE

Make sure the device is

charged before using it (green

LED).

If the device is not going to

be used for over 3 months,

ensure that the battery is

fully charged.

3. SET TING UP THE BELT

Setup the size of your belt by measuring your

waist circumference and seeing which belt

number it matches to.

S/M belt Attachment

area L/XL belt

65 - 67 cm 0 85 - 87 cm

67 - 72 cm 1 87 - 94 cm

72 - 78 cm 2 94 - 100 cm

78 - 84 cm 3 100 - 107 cm

84 - 85 cm 4 107 - 113 cm

- 5 113 - 114 cm

Tips: How to measure the waist circumference?

Stand up straight, place the tape measure at the level of your

belly button and wrap it around your waist. Hold the tape

measure against your body, not too tight, and take a reading.

Adjust the belt by positioning the internal attachment on belt

number found on the previous step.

Then adjust the other side external attachment and bend the

belt to get a S-like shape.

Check if the adjustment is okay by placing

the center of the back belt on your spinal

cord. The notches on the belt facilitate the

positioning.

On the front, the plastic belt holster must be

centered on your belly button. If not, remove

the belt and restart from the beginning to ne

tune the belt adjustment.

Once done, do not change these settings unless

your body shape changes.

Remove the belt and stick the electrodes grid

side down in-line with the outlines. Make sure

that the metallic pins are completely covered

by the electrodes.

4. DOWNLOADING THE APP

It is recommended to

download and use the app to

access all the features of the

device.

Pair your device with your

smartphone by following the

app’s guidance. Then select

the Objective you want to

achieve (COREBELT 3.0 and

5.0) or the Program you want

to perform (COREBELT 1.0).

5. STARTING THE SESSION

Before starting a session, remove the plastic

cover from the electrodes.

Be sure to use the right electrodes according

to your session:

Abs session -> Front electrodes only

Back session -> Back electrodes only

Core session -> Front and Back electrodes

Position the belt around your waist. Firstly,

position the back of the belt on your lower

back. Then stretch the belt around your waist.

The front electrodes should be positioned on

each side of your belly button.

Tips: To avoid having any loose ends of the

belt hanging down, you can attach the end

of the belt to the self-fastening area and

slide it under the elastic strap.

≥ iOS12

≥ Android 8

Slip the stimulator into the belt holster, make

sure it plugs in properly, switch on the device

and start your session.

Tips: At the end of the session, you may

leave the electrodes on the belt but use the

plastic cover to protect them.

N.B. You can also start a session without the use of the app.

For more information please check the complete user manual

at www.compex.com.

6. OBJECTIVES/PROGRAMS

1.0 3.0 5.0

Ab Objectives (only front electrodes used)

I want to tone my abs • •

I want to reduce my waist • •

I want to sculpt my abs • •

Lower Back Objectives (only back electrodes used)

I want to reinforce my lower

back • •

I want to relax my back •

I want to help relieve my

back pain •

Core Objectives (front and back electrodes used)

I want to reinforce my core

stability • •

I want to work hard to get

result 1* • •

I want to work hard to get

result 2* •

Programs

P1 Work my abs (only front

electrodes used) •

P2 Reinforce my core

stability (front and back

electrodes used) •

* These objectives combine muscle stimulation and active workout

at the same time.

Product specificaties

Merk:	Compex
Categorie:	Niet gecategoriseerd
Model:	CoreBelt 3.0
Geslacht:	Unisex
Hoofdkleur van product:	Zwart
Levensfase van consument:	Volwassene
Maat 1:	S/M
Maatgroep 1:	SML
Seizoen:	Ieder seizoen
Bevestigingstype:	Mechanische sluiting
Afneembare gesp:	Nee