Coleman Kohna Handleiding

Coleman Tent Kohna

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Coleman Kohna (1 pagina's) in de categorie Tent. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
STITCH LINE
KOHNATM TENT 18’ X 12’ MODEL 2000001188
Before you begin
Read all instructions before set up.
β€’ Select a level campsite clear of rocks, branches, and other hard
or sharp objects, to install your tent.
WARNING: Keep clear of overhead power lines.
β€’ Do not set up your tent under trees.
β€’ For best results in windy conditions, position end of tent into
the wind.
β€’ Enlist the help of at least one other person to assist you when
it is time to assemble the tent.
To Set Up Tent’s Living Quarters
1. Unfold tent and spread out on a clean, level surface with the
door facing the desired direction. (Fig. 1)
2. Assemble main tent poles by interlocking both longer, black
shock-corded, poles.
3. Insert black main poles through sleeves, in top of the Living
Quarters area of tent, forming an β€œX” as shown. (Fig. 1)
4. Insert one end of each black main pole into pins in front
corners of tent. (Fig. 2 & 2A)
5. Go to opposite end of each pole and gradually apply pressure
to the pole forming an arch. Insert the pin into the pole end
at the tent corners. (Fig. 2 & 2A)
Parts and Components
Description Part Number
Living Quarters, Main Poles, Black (2) 5010000384
Living Quarters, Side Poles, Thin, Gray (2) 5010000383
Screen Room Poles, Gray (2) 5010000382
Rainfly 5010000385
7. Assemble 2 interlocking shock-corded, thin, gray side poles.
8. Insert gray side poles through sleeves, in front and back of
the living quarters area of tent as shown. (Fig. 3)
NOTE: Make sure the side poles are positioned on the
outside of the black main poles installed earlier.
Fig. 5
9. Insert one end of each gray side pole into pins in side of tent
forming an β€œX”. (Fig. 4 & Fig. 4A)
10. Go to opposite end of each pole and gradually apply pressure
to the pole forming an arch. Insert the pin into the pole end
at opposite side of tent forming an β€œX”. (Fig. 4)
11. Attach large frame clips along edges of upper four corners
tent to connect black main poles and gray side
poles where they intersect. (Fig. 4 & 4B)
Fig. 3
To Set Up Tent’s Living Quarters (continued)
(continued on other side)
Fig. 1
Door
Living Quarters Screen Room
Main Tent Poles
Sleeves
Fig. 2
6. Attach smaller frame clips along edges of
tent to black main poles.(Fig. 2B)
NOTE: DO NOT attach the larger frame
clips located near the top of the tent living
quarters. They will be used in later assembly.
Sleeve at back of
Living Quarters Sleeve at front
of Living
Quarters
Fig. 4
Sleeve at front of
Screen Room
To Set Up Tent’s Screen Room
1. Assemble screen room poles by interlocking both longer,
gray, shock-corded poles.
2. Insert gray poles through both sleeves on screen room as
shown. (Fig. 5)
Sleeve at back of
Screen Room
Gray Screen
Room Poles
2A
2B
4B
4A
Door
Thin, Gray,
Side Poles


Product specificaties

Merk: Coleman
Categorie: Tent
Model: Kohna

Heb je hulp nodig?

Als je hulp nodig hebt met Coleman Kohna stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Tent Coleman

Handleiding Tent

Nieuwste handleidingen voor Tent