Cocraft HSS 3,6-LI Handleiding

Cocraft Boormachine HSS 3,6-LI

Lees hieronder de 📖 handleiding in het Nederlandse voor Cocraft HSS 3,6-LI (56 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 85 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/56
ENGLISHSVENSK ANORSKSUOMIDEUTSCH
Important!
Read the entire instruction manual
carefully and make sure that you fully
understand it before you use the
equipment. Keep the manual for future
reference.
Viktig information:
LĂ€s hela bruksanvisningen noggrant och
försÀkra dig om att du har förstÄtt den
innan du anvÀnder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nĂžye og forsikre
deg om at du forstÄr dem, fÞr du tar
produktet i bruk. Ta vare pÄ anvisningene
for seinere bruk.
TÀrkeÀÀ tietoa:
Lue nÀmÀ ohjeet huolellisesti ja varmista
ettÀ olet ymmÀrtÀnyt ne, ennen kuin
alat kÀyttÀÀ laitetta. SÀilytÀ ohjeet
myöhempÀÀ tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung sorgfÀltig
durchlesen und aufbewahren.
HSS 3.6-LI
LED WORKLIGHT WITH DELAY
3.6 V
CORDLESS SCREWDRIVER
SKRUVDRAGARE SKRUTREKKER
RUUVINVÄÄNNIN AKKUSCHRAUBER
18-3631 ‱ 41-1451
Ver. 20190624
Original instructions
Bruksanvisning i original
Originalbruksanvisning
AlkuperÀinen kÀyttöohje
Original Bedienungsanleitung
Art.no Model
18-3631 DPL 124B
41-1451 DPL 124B
ENGLISH
2
3.6 V Cordless Screwdriver
Art.nr 18-3631 Modell DPL 124B
41-1451 DPL 124B
Please read theentire instruction manual before use and then save it for
future reference. We reserve theright for any errors in text or images and any
necessary changes made to technical data. In theevent of technical problems
or other queries, please contact our Customer Services (see address details
on theback).
Safety
General safety instructions for power tools
Warning Read all safety warnings and all instructions. Failure to follow
thewarnings and instructions may result in electric shock, ïŹre and/or
serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
Theterm “power tool” in thewarnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in
thepresence of ïŹ‚ammable liquids, gases or dust. Power tools create
sparks which may ignite thedust or fumes.
c) Keep children and bystanders away while operating apower tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match theoutlet. Never modify theplug in
any way. Do not use any adapter plugs with earthed (grounded)
power tools. UnmodiïŹed plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is anincreased risk of electric shock if
your body is earthed or grounded.
ENGLISH
3
c) Do not expose power tools to rain or wet conditions. Water entering
apower tool will increase therisk of electric shock.
d) Do not abuse thecord. Never use thecord for carrying, pulling or
unplugging thepower tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase therisk of
electric shock.
e) When operating apower tool outdoors, use anextension cord
suitable for outdoor use. Use of acord suitable for outdoor use reduces
therisk of electric shock.
f) If operating apower tool in adamp location is unavoidable, use
aresidual current device (RCD) protected supply. Use of anRCD
reduces therisk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating apower tool. Do not use apower tool while you are tired
or under theinïŹ‚uence of drugs, alcohol or medication. Amoment of
inattention while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure theswitch is in theoff-position
before connecting to power source and/or battery pack, picking up
or carrying thetool. Carrying power tools with your ïŹnger on theswitch
or energising power tools that have theswitch on invites accidents.
d) Remove any adjusting key or wrench before turning thepower tool on.
Awrench or akey left attached to arotating part of thepower tool may
result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times.
This enables better control of thepower tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
g) If devices are provided for theconnection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust-related hazards.


Product specificaties

Merk: Cocraft
Categorie: Boormachine
Model: HSS 3,6-LI

Heb je hulp nodig?

Als je hulp nodig hebt met Cocraft HSS 3,6-LI stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Boormachine Cocraft

Handleiding Boormachine

Nieuwste handleidingen voor Boormachine