CLUB3D SenseVision CSV-5300 Handleiding

CLUB3D Splitter SenseVision CSV-5300

Lees hieronder de 📖 handleiding in het Nederlandse voor CLUB3D SenseVision CSV-5300 (2 pagina's) in de categorie Splitter. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Output Up to 5 Up to 6

Up to 3 Up to 6

Up to 2 Up to 4

1366x768 @ 60Hz, 24bpp

1600x900 @ 60Hz, 24bpp

1920x1080 @ 60Hz, 24bpp

2560x1440 @ 60Hz, 24bpp Up to 2

HBR HBR2

Illustration of two CSV-5300 on a six monitor congurationAvailable bandthwidth and number of display devicesClub 3D Radeon HD7770 with MST Hub

While we endeavor to provide the most accurate, up-to-date information available, the content on this document may be out of date or include omissions, inaccuracies or other errors. Therefore Club 3D does not accept any rights claimed on the content of this docu-

ment. Please refer to a full overview of our Legacy Terms and Conditions on www.club-3d.com. All other brand names are trademarks or registered trademarks and are the property of their respective owners. All content is subject to change without prior notice.

Club 3D B.V. PO Box 599, 2130 AN Hoofddorp, The Netherlands

www.club-3d.com

Weight Size

Multi Stream transport Hub 100g 78.2*60.5*18.6 mm

1. Easy conguration for adding three displays and

does NOT require active adapters (DP++ compliant)

2. Perfect multi monitor solution on a budget. Plug

and Play.

3. Hot plugging. Does not require shutting down the

system.

4. Compatible to all existing DisplayPort graphic cards

and notebooks1

5. Best with AMD Radeon™ Graphics2

6. Best with AMD A-series APU’s3

7. AMD Eyenity Technology ready4

1 Check with your device vendor if restrictions are applied

2 5K series and above

3 DisplayPort output from mainboard is required

4Supports multiple independent display outputs simultaneously, AMD Eyenity technology

delivers innovative graphics display capabilities enabling massive desktop workspaces and

ultra immersive visual environments for the ultimate panoramic computing experience.

SenseVision - Multi Stream Transport Hub

CSV-5300 - EAN: 8717249411918

Leveraging the micro-packet architecture of DisplayPort™, DisplayPort™

1.2 adds the capability to address and drive several display devices

through one DisplayPort™ connector. This feature has often been

referred to as daisy-chaining or addressable displays.

The Club 3D MST hub is a hub device that receives a DisplayPort™

1.2 MST signal from the source device and splits up and routes the

video streams independently to each display device. Using this type of

conguration also allows the use of non DisplayPortTM 1.2 monitors.

Non DisplayPort™ outputs, such as VGA, DVI or HDMI®, the Club 3D

MST hub is DP++ and can actively convert the DisplayPort™ signal to

the other types of display interface signals.

Multi-display Technologies DisplayPort™ 1.2, a new display interface,

boasts features such as tremendous bandwidth and daisy-chaining

capabilities. Combined, these features complement the AMD Eyenity

technology multi-display technology very well.

The new MST hub display technology is part of the ecosystem in the

Club 3D AMD Radeon™ graphic cards.

Supported graphic cards can be found on the following AMD RAdeon

series:

- HD 5000 Series (HBR)

- HD 6000 Series (HBR2)

- HD 7000 Series (HBR2)

Club 3D recommends:

CAC-1000 - DP to SL5 DVI-D

CAC-1001 - DP to HDMI

CAC-1002 - DP to VGA

CAC-1050 - DP to DL6 DVI

CAC-1051 - DP to DL6 DVi 3D

CAC-1052 - DP to SL5 DVI

CAC-1053 - DP to HDMI 3D

5 SL= Single Link

6 DL= Dual Link

- Standards compliance/support:displayport v1.2, displayport v1.1a,VESA DDM

- Standard,HDCP V2.0,DisplayId,and EDID V1.4

- Supports main link rates of 5.4 bps(HBR2),2.7 bps(HBR)and 1.62 bps(RBR) from source

- Supports 1/2/4 lanes of main link for RX side

- Supports three DP++ output port,or two dual-link DVI ports,or the combination of ports

- For DP 1.2 source,supports DP1.2 MST multi video/audio steams

- Supports 1.1 source,supports ViewXpand

- Supports DP-DP Bypass mode

- Supports AUX-CH enables SBM and I2C mapping over AUX between the source/sink and

device

- Dedicated I2C slave for main processor to access the device

- Supported output resolution:up to 2560X1600@60Hz each monitor in DP1.2 MST and up to

FHD/1080p in DP1.1 or DP 1.2 SST

- Input pixel data depth 6/8/10/12 bits and supports output pixel format RGB444

KEY POINTS PRODUCT FEATURES

BRIEF DESCRIPTION

Product specificaties

Merk:	CLUB3D
Categorie:	Splitter
Model:	SenseVision CSV-5300
Kleur van het product:	Zwart
Gewicht:	120 g
Breedte:	78 mm
Diepte:	60 mm
Hoogte:	18 mm
Snoerlengte:	0.12 m
Breedte verpakking:	265 mm
Diepte verpakking:	81 mm
Hoogte verpakking:	168 mm
Type verpakking:	Doos
Maximum resolutie:	3840 x 2160 Pixels
Certificering:	CE, RoHS, FCC
HDCP:	Ja
Maximale refresh snelheid:	60 Hz
Aansluiting voor netstroomadapter:	Ja
3D:	Ja
Plug and play:	Ja
Aantal per verpakking:	1 stuk(s)
Ondersteunt Windows:	Ja
HDCP versie:	2.0
Video uit:	3x DisplayPort
Gemakkelijk te installeren:	Ja
Aansluiting video:	DisplayPort
Overdrachtssnelheid:	5.4 Gbit/s
Extended display identification data (EDID):	Ja
Hoeveelheid Video ports:	3