Classé Sigma 2200i Handleiding

Classé Receiver Sigma 2200i

Lees hieronder de 📖 handleiding in het Nederlandse voor Classé Sigma 2200i (48 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/48
Owners Manual
Sigma 2200i
Stereo Integrated Amplifier
2
Clas marks the “CE” symbol indicating compliance of this device with the EMC (Electromagnetic
Compatibility) and LVD (Low Voltage Directive) standards of the European Community.
Clas complies with the European Parliament and Council Directive 2002/96/EC concerning Waste Electrical
and Electronic Equipment (WEEE). is product must be appropriately recycled or processed in accordance with
these directives. Consult your local waste disposal authority for guidance.
Clas products are designed and manufactured to comply with the Restriction of Hazardous Substances (RoHS)
as stated in the European Parliament and Council Directive 2002/95/EC.
NOTICE
All of us at Clas take extreme care to ensure that your purchase will remain a prized investment. We are proud to inform you
that all Classé components have been ocially approved for the European Community (CE) mark.
is means that your Classé product was subjected to the most rigorous manufacturing and safety tests in the world. e CE
mark certies that your purchase meets or exceeds all European Community requirements for manufacturing consistency and
consumer safety.
is equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) is device may not cause harmful interference, and (2)
is device must accept any interference received, including interference that may cause undesired operation. ese limits are
designed to provide reasonable protection against harmful interference in a residential installation. is equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the
equipment on and o, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorientorrelocatethereceivingantenna;
• Increasetheseparationbetweentheequipmentandthereceiver;
• Connecttheequipmentintoanoutletonacircuitdierentfromthattowhichthereceiverisconnected;
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
CAUTION:Changesormodicationstothisequipmentnotexpresslyapprovedbythemanufacturercouldvoidtheuser’s
authority to operate the equipment.
is product incorporates copyright protection technology that is protected by U.S. patents ad other intellectual property
rights. Reverse engineering or disassembly is prohibited.
e information contained in the manual is subject to change without notice. e most current version of this manual will be
posted on our web site at http://www.classeaudio.com.
3
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
 7. Donotblockanyventilationopenings.Installinaccordancewiththemanufacturersinstructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. e wide blade or the
third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. Do not expose this apparatus to dripping or splashing and ensure that no objects lled with liquids, such as vases, are
placed on the apparatus.
16.
TocompletelydisconnectthisapparatusfromtheACMains,disconnectthepowersupplycordplugfromtheACreceptacle.
17. e mains plug of the power supply cord shall remain readily operable.
18. Do not expose batteries to excessive heat such as sunshine, re or the like.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT
REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PERSONNEL.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
e lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the
presenceofuninsulated“dangerousvoltage“withintheproduct’senclosurethatmaybeofsucientmagnitude
to constitute a risk of electric shock to persons.
e exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the product.


Product specificaties

Merk: Classé
Categorie: Receiver
Model: Sigma 2200i
Kleur van het product: Zwart
Ingebouwd display: Ja
Gewicht: 12110 g
Breedte: 433 mm
Diepte: 370 mm
Hoogte: 140 mm
Gewicht verpakking: 15570 g
Stroomverbruik (in standby): 0.5 W
Audio-uitgangskanalen: - kanalen
Frequentiebereik: 10 - 20000 Hz
Signaal/ruis-verhouding: 97 dB
Totale harmonische vervorming (THD): 0.018 procent
AC-ingangsspanning: 90-264 V
AC-ingangsfrequentie: 50 - 60 Hz
Stroomverbruik (typisch): 185 W
Piekvermogen per kanaal: - W
Synchronisatie ingangsimpedantie: 100000 Ohm
RMS vermogen uitvoer per kanaal (4 Ohm): 400 W
RMS vermogen uitvoer per kanaal (8 Ohm): 200 W

Heb je hulp nodig?

Als je hulp nodig hebt met Classé Sigma 2200i stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Classé

Handleiding Receiver

Nieuwste handleidingen voor Receiver