CkeyiN MK-21V Handleiding

CkeyiN Niet gecategoriseerd MK-21V

Lees hieronder de 📖 handleiding in het Nederlandse voor CkeyiN MK-21V (22 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/22
ELECTRIC DRILL SET
User Manual
Please read the user manual carefully before use and keep it
properly for future reference.
MK-21V
Safety warning
EN
CONTENTS
warn!
Workplace safety
Read all safety warnings, instructions, illustrations
and regulations provided with the power tool.
Failure to follow the instructions listed below can
result in electric shock, fire and/or serious injury.
The term "power tool" in this warning refers to
either a mains-operated (corded) power tool or a
battery-operated (cordless) power tool.
1. Keep the work area clean and bright. Cluttered and
dark venues can cause accidents.
2. Do not operate power tools in explosive environments
such as flammable liquids, gases or dust. Sparks from
power tools can ignite dust or gases.
3. When operating power tools, keep away from children
and bystanders. Lack of concentration can cause the
operator to lose control of the tool.
Electrical safety
1. The power tool plug must match the socket. The plug
must never be modified in any way. Power tools that
need to be grounded cannot use any adapter plug.
Unmodified plugs and matching receptacles will reduce
the risk of electric shock.
2. Do not expose power tools to rain or moisture. Water
entering a power tool increases the risk of electric
shock.
3. Do not abuse the soft cord. Never carry, pull or unplug
a power tool by its cord. Keep cords away from heat,
oil, sharp edges, or moving parts. Damaged or tangled
cords increase the risk of electric shock.
Usage and precautions
1. Do not use power tools reluctantly, use appropriate
power tools according to the purpose. Choosing the
right rated power tools will make your job more efficient
and safer.
2. If the switch cannot turn on or off the power, the power
tool cannot be used. Power tools that cannot be
controlled by a switch are dangerous and must be
repaired.
3. Before making any adjustments, changing accessories
or storing the power tool, the power tool must be
unplugged from the power source and/or the battery
pack (if removable) must be removed.
This protective safety measure reduces the risk of the
power tool starting accidentally.
4. Store unused power tools out of the reach of children,
and do not allow people who are unfamiliar with power
tools and do not understand these instructions to
operate power tools. Power tools are dangerous in the
hands of untrained users.
5. Maintain power tools and accessories. Check whether
the moving parts are adjusted in place or stuck, check
for damage to parts and other conditions that affect
the operation of the power tool. If damaged, the power
tool should be repaired before use. Many accidents
are caused by poorly maintained power tools.
6. Keep the handle and holding surface dry, clean, and
free of grease. A slippery handle cannot guarantee safe
grip and control of the tool in the event of an accident.
Battery pack usage and precautions
1. Only use the charger specified by the manufacturer to
charge. A fire hazard may occur when a charger
designed for one type of battery pack is used with
another battery pack.
2. Only use power tools equipped with dedicated battery
packs. Use of other battery packs may create a risk of
injury and fire.
Personal safety
1. Stay alert, pay attention to what you are doing and stay
awake when operating power tools. Do not operate
power tools when you are tired or under the influence
of drugs, alcohol or medical treatments. Momentary
negligence while operating a power tool can result in
serious personal injury.
2. Use personal protective equipment, such as wearing
goggles under appropriate conditions, using dust
masks, non-slip safety shoes, hard hats, hearing
protection and other devices to reduce personal
injuries.
3. Prevent accidental starting. Make sure the switch is in
the off position before connecting power and/or battery
box, picking up or carrying the tool. Carrying tools with
your fingers on the switch or applying power while the
switch is on can cause hazards.
4. Before turning on the power tool, remove any
adjustment keys or wrenches. Wrenches or keys left on
rotating parts of a power tool can cause personal injury.
5. Do not overextend your hands. Always pay attention to
your footing and body balance. This provides better
control of the power tool in unexpected situations.
6. Dress appropriately. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothing, jewelry, or long hair
can get caught in moving parts.
1、（EN )English······· ······01-05·····
2、（DE )Deutsch················ 06-10
3、（FR )Français···· ········· ···11-15
4、（ES )Español······ ···· ······1 206-
01 EN
To remove the battery pack, press the button on the front
of the battery pack while pulling the battery pack away
from the tool.
When installing the battery pack, align the tongue on the
battery pack with the groove on the cover, and then push
it into place. Insert it all the way into place until it locks
and clicks. If you can reach the red indicator in the picture,
it means it is not fully locked.
CAUTION: Be sure to fully insert the battery pack
until the red indicator is no longer visible. Otherwise,
it may accidentally become detached from the tool,
causing injury to yourself or others.
CAUTION: Do not force the battery pack to install. If
the battery pack is difficult to insert, it may be inserted
incorrectly.
Battery protection system
Repair
1. Let professional maintenance personnel repair the
power tool using the same spare parts. This will keep
the power tool being repaired safe.
2. Never repair a damaged battery pack. The battery
pack may only be repaired by the manufacturer or its
authorized repair service provider.
3. Please follow the instructions in this manual when
applying lubricating oil and replacing accessories.
3. When the battery pack is not in use, keep it away from
other metal objects, such as paper clips, coins, keys,
nails, screws or other small metal objects to prevent
one end of the battery pack from connecting to the other
end. A short circuit at the battery pack terminal may
cause burning or fire.
4. Do not use modified battery packs or tools. damaged or
A damaged or modified battery pack may produce
unpred ts, resulting iictable resul n fire, explo ion, or injurys .
5. Never disassemble or modify the battery pack.
Otherwise it may cause fire, overheating or explosion.
6. If the machine running time becomes too short, please
stop using it immediately. Failure to do so may result in
overheating, fire or even explosion.
7. If the el ey em with ectrolyte enters your es, please rinse th
clean water and seek medical attention immediately.
Failure to do so may result in visual impairment.
8. Do not store or use tools and battery packs in places
where the temperature may reach or exceed 50°C (122°F).
9. Do not incinerate the battery pack even if the battery
pack is severely damaged or completely worn out.
Battery packs can explode in fire.
10. Do not shoot nails into the battery pack, or cut,
squeeze, throw, drop the battery pack, or hit the
battery pack with hard objects. Otherwise it may
cause fire, overheating or explosion.
11. When discarding the battery pack, remove it from the
tool and dispose of it in a safe area. Please follow
local regulations on how to dispose of used batteries.
12. Use batteries only with designated products. Installing
batteries into incompatible products can cause fire,
overheating, explosion, or electrolyte leakage.
13. If the tool is not used for a long time, the battery must
be removed from the tool and charged for at least 6
hours before use.
This tool is equipped with a battery protection system.
This system automatically cuts power to the motor to
extend tool and battery life. When working, if the tool or
battery is in the following conditions, the tool will
automatically stop running.
Overload warning function
The overload warning function works if the current rises
sharply due to operation (for example, applying excessive
pressure to the workpiece). The overload warning function
reduces the swing speed, thereby increasing the vibration
amplitude. In this case, once the application tool is
isolated from the workpiece, the swing speed returns to
normal. Continue operation with appropriate load.
Overload protection
The tool will automatically shut down when the tool
/ battery is operated in a manner that results in
abnormally high current flow. In this case, close the tool
and stop the application operations that are causing the
tool to be overloaded. Then start the tool and restart.
Overheating protection
The tool will automatically stop when the tool/battery
overheats. In this case, wait for the tool/battery to cool
down before turning the tool on. Over-discharge protection
When the battery power is insufficient, the tool
automatically stops operating. At this time, please
remove the battery from the tool and charge it.
*For safety reasons, it is not recommended for people
(including children) who are disabled, mentally retarded,
inexperienced or incapable of independent operation to
use this machine without supervision. Please supervise
children and prevent them from treating this machine as
a toy.
Installing or removing the
battery pack
CAUTION: Always turn off power to the tool before
installing or removing the battery pack.
CAUTION: Hold the tool and battery pack firmly when
installing or removing the battery pack. Otherwise they
may slip from your hands, causing damage to the tool
and battery pack, or even personal injury.
① ② Red indicator Button Battery pack③
02 EN

Product specificaties

Merk: CkeyiN
Categorie: Niet gecategoriseerd
Model: MK-21V

Heb je hulp nodig?

Als je hulp nodig hebt met CkeyiN MK-21V stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd CkeyiN

CkeyiN

CkeyiN MK-21V Handleiding

4 Maart 2025

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Proscan

Proscan PGKS100 Handleiding

4 Maart 2025
Philips

Philips OneUp 5000 series XV5113 Handleiding

4 Maart 2025
Phase Technology

Phase Technology PhaseTech Premier Lux PL150 Handleiding

4 Maart 2025
Phase Technology

Phase Technology PhaseTech Premier Lux PL150s Handleiding

4 Maart 2025
Phase Technology

Phase Technology Premier Lux PL350 Handleiding

4 Maart 2025
Phase Technology

Phase Technology Solaris SPF-15 Handleiding

4 Maart 2025
Phase Technology

Phase Technology Solaris SPF-25 Handleiding

4 Maart 2025
Phase Technology

Phase Technology TEATRO PC3.0 Handleiding

4 Maart 2025
True

True Stryker Slat TC1-SA-35 Handleiding

4 Maart 2025
Casr

Casr Style Handleiding

4 Maart 2025