Cisco UCS C460 M4 Handleiding

Cisco Server UCS C460 M4

Lees hieronder de 📖 handleiding in het Nederlandse voor Cisco UCS C460 M4 (142 pagina's) in de categorie Server. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/142
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco UCS C460 M4 Server
Installation and Service Guide
April 20, 2016
Text Part Number: OL-31215-01
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL
STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT
SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE
OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The following information is for FCC compliance of Class A devices: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users will be required
to correct the interference at their own expense.
The following information is for FCC compliance of Class B devices: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If the equipment causes interference to radio or television reception, which can be
determined by turning the equipment off and on, users are encouraged to try to correct the interference by using one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Modifications to this product not authorized by Cisco could void the FCC approval and negate your authority to operate the product.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCBs public
domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH
ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT
LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF
DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING,
WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO
OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this
URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display
output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in
illustrative content is unintentional and coincidental.
Cisco UCS C460 M4 Server Installation and Service Guide
© 2016 Cisco Systems, Inc. All rights reserved.
iii
Cisco UCS C460 M4 Server Installation and Service Guide
OL-31215-01
C O N T E N T S
Preface vii
Audience vii
Conventions vii
Related Documentation xiv
Documentation Feedback xiv
Obtaining Documentation and Submitting a Service Request xiv
C H A P T E R
1Overview 1-1
Front Panel Features 1-1
Rear Panel Features 1-2
Replaceable Component Locations 1-3
Server Features Overview 1-4
C H A P T E R
2Installing the Server 2-1
Unpacking and Inspecting the Server 2-2
Preparing for Server Installation 2-3
Installation Guidelines 2-3
Rack Requirements 2-4
Equipment Requirements 2-4
Slide Rail Adjustment Range 2-4
Installing the Server in a Rack 2-5
Installing the Slide Rails 2-5
Installing the Cable Management Arm (Optional) 2-9
Reversing the Cable Management Arm (Optional) 2-10
Initial Server Setup 2-11
Connecting and Powering on the Server (Standalone Mode) 2-11
NIC Modes and NIC Redundancy Settings 2-14
NIC Modes 2-14
NIC Redundancy 2-14
System BIOS and Cisco IMC Firmware 2-15
Updating the BIOS and Cisco IMC Firmware 2-15
Accessing the System BIOS 2-16


Product specificaties

Merk: Cisco
Categorie: Server
Model: UCS C460 M4
Kleur van het product: Grijs
Gewicht: 64400 g
Breedte: 482 mm
Diepte: 830 mm
Hoogte: 175 mm
LED-indicatoren: HDD, Network, Power, System, Temperature
Frequentie van processor: - GHz
Processorfamilie: Intel
Ethernet LAN: Ja
Aantal USB 2.0-poorten: 3
VGA (D-Sub)poort(en): 1
Aantal Ethernet LAN (RJ-45)-poorten: 5
Netvoeding: 1400 W
Intern geheugen: - GB
Ethernet LAN, data-overdrachtsnelheden: 10,100,1000 Mbit/s
Temperatuur bij opslag: -40 - 70 °C
Aantal ventilatoren: 4 ventilator(en)
Maximum intern geheugen: 6000 GB
Type behuizing: Rack (4U)
Overtollige fans ondersteuning: Ja
Redundante voeding: Ja
Kloksnelheid geheugen: - MHz
Geheugenslots: 96
Ethernet interface type: Fast Ethernet, Gigabit Ethernet
Chipset moederbord: Intel® C602J
PCI Express x16 slots: 3
RAID support: Ja
PCI Express x16 (Gen 3.x) slots: 3
PCI Express x4 (Gen 3.x) slots: 1
Koperen ethernetbekabelingstechnologie: 1000BASE-T
Ondersteunde opslagstationinterfaces: Serial Attached SCSI (SAS), Serial ATA
Seriële poort(en): 1
Aantal ondersteunde redundante voedingen: 2
PCI Express x8 slots: 6
PCI Express x4 slots: 1
Soorten RAID: 0, 1,5
PCI Express x8 (Gen 3.x) slots: 6
Compatibele processors: Intel® Xeon®
Aantal ondersteunde processoren: 4
Intel® Xeon series: E7-4800, E7-8800
Aantal DIMM sloten: 96
Aantal storage drives ondersteund: 12
Opslagschijf afmetingen ondersteund: 2.5 "
Ondersteunde geheugen types: DDR3-SDRAM, DDR4-SDRAM
Hot-swap HDD bays: Ja
AC-ingangsspanning: 200 - 240 V
AC-ingangsfrequentie: 50 - 60 Hz
Bedrijfstemperatuur (T-T): 10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V): 0 - 95 procent
Aantal geïnstalleerde redundante voedingen: 4
Hot-swap: Ja
ACPI version: 4.0
Maximale cache: 512 MB

Heb je hulp nodig?

Als je hulp nodig hebt met Cisco UCS C460 M4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Server Cisco

Handleiding Server

Nieuwste handleidingen voor Server