Cisco N55-M16P-RF Handleiding

Cisco Niet gecategoriseerd N55-M16P-RF

Lees hieronder de 📖 handleiding in het Nederlandse voor Cisco N55-M16P-RF (52 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 150 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/52

C H A P T E R

1-1

Cisco Nexus 5000 Series Hardware Installation Guide

Overview

This chapter provides an overview of the Cisco Nexus 5000 Series switches, which include the Cisco

Nexus 5000 Platform switches and the Cisco Nexus 5500 Platform switches. The overview of each of

these switches includes information on the expansion modules, power supplies, and fan modules that you

can include with them.

This chapter includes the following sections:

•Cisco Nexus 5500 Platform Switches, page 1-1

•Cisco Nexus 5000 Platform Switches, page 1-29

Cisco Nexus 5500 Platform Switches

The Cisco Nexus 5500 Platform supports the following application scenarios, many of which require the

installation of other products:

•As an access-layer switch, it can be used purely as a 1- and 10-Gigabit Ethernet switch,

consolidating 10 Gigabit Ethernet connections into a smaller number of server connections trunked

to the aggregation layer.

•As a smaller-scale aggregation switch, it can be used as a Layer 3 1- and 10-Gigabit Ethernet switch,

consolidating multiple 1- and 10-Gigabit Ethernet connections from a data center access layer.

•In conjunction with the Cisco Nexus 2248T GE Ethernet Fabric Extender, the Cisco Nexus 5500

Platform can be a high-density 1-Gigabit Ethernet switching system, consolidating more than 900

Gigabit Ethernet connections within a single management plane.

•In conjunction with the Cisco Nexus 2232T 10GE Fabric Extender, it can be a high-density

switching system, consolidating more than 600 10-Gigabit Ethernet connections within a single

management plane.

•In conjunction with the Cisco Nexus 2224TM 10GE Fabric Extender, it can be a high-density

switching system, consolidating more than 600 10-Gigabit Ethernet connections within a single

management plane

•As a rack-level I/O consolidation platform, the switch carries Ethernet traffic from servers to the

aggregation layer and carries FC traffic to existing Fibre Channel SANs.

•As a crucial element in data center I/O consolidation, the switch enables I/O consolidation at the

access layer and provides interoperability with the Cisco Nexus 5500 Platform and other

standards-based products.

This section describes the Cisco Nexus 5500 Platform switches and contains these sections:

•Cisco Nexus 5596UP Switch, page 1-2

1-2

Cisco Nexus 5000 Series Hardware Installation Guide

Chapter 1 Overview

Cisco Nexus 5500 Platform Switches

•Cisco Nexus 5596T Switch, page 1-12

•Cisco Nexus 5548UP and 5548P Switches, page 1-17

Cisco Nexus 5596UP Switch

This section describes the Cisco Nexus 5596UP switch and its components. This section includes the

following topics:

•Features, page 1-2

•Chassis, page 1-2

•Expansion Modules, page 1-4

•Ports, page 1-7

•Power Supply, page 1-8

•Fan Module, page 1-10

•Transceivers, page 1-11

Features

The Cisco Nexus 5596UP switch is a top-of-rack, 10-Gigabit Ethernet and Fibre channel over Ethernet

(FCoE) switch offering up to 1920 Gigabit throughput and up to 96 ports. The switch has 48 1- and

10-Gigabit Ethernet and FCoE ports and three expansion slots. As a top-of-rack switch, all the servers

in the rack connect to the Cisco Nexus 5596UP switch, and it connects to the LAN or SAN.

The Cisco Nexus 5596UP switch has the following features:

•48 fixed 1- and 10-Gigabit Ethernet server connection ports on the back of the switch

•Three slots on the back of the switch for optional expansion modules, which can be either a 16-port

10-Gigabit generic expansion module 2 (GEM2) or a layer 3 GEM2

•Two slots on the front of the switch for hot swap-capable power supplies, which provide

front-to-back airflow for cooling (the Cisco Nexus 5596T and 5596UP switches alternatively

support back-to-front [port-side intake] airflow)

•Four slots on the front of the switch for hot swap-capable fan modules.

•Layer 2 or Layer 3 I/O modules

•One USB port on the front of the switch

Note Hot swapping of normal air flow fans and power supplies with reverse airflow fans and power supplies

is not supported on the Cisco Nexus 5000 switches. Hot swapping of fans and power supplies is only

supported if they are replaced with the same direction parts.

Chassis

The Cisco Nexus 5596UP chassis is 2 RU or 3.47 inches (8.8 cm) tall, 17.3 inches (43.9 cm) wide, and

29.5 inches (74.9 cm) deep. It is designed to be mounted in a standard 19-inch wide rack. The front of

the switch, shown in Figure 1-1, has a USB port, four Ethernet and ports (two cross-connect ports, one

management port, and one console port), two power supplies, and four fan modules.

1-3

Cisco Nexus 5000 Series Hardware Installation Guide

Chapter 1 Overview

Cisco Nexus 5500 Platform Switches

Figure 1-1 Front View of the Cisco Nexus 5596UP Switch

The management and console ports are in a 2 x 2 stacked RJ-45 jack. Figure 1-2 shows a close-up view

of these ports. For information about the connector port LEDs, see Table D-1 on page D-2.

Figure 1-2 Management and Console Ports

237867

1 4USB port System status LED

2Management and console ports (two RJ-45 Ethernet connector

ports on the left, a RJ-45 network management connector on the

upper right, and a console connector on the lower right)

5Two power supplies

3 6Identifier LED Four fan modules

2 3

239021

Product specificaties

Merk:	Cisco
Categorie:	Niet gecategoriseerd
Model:	N55-M16P-RF
Ethernet LAN, data-overdrachtsnelheden:	1000,10000 Mbit/s
Compatibiliteit:	Cisco Nexus 5500
Full duplex:	Ja
Aantal moduleslots SPF+:	16
Vezel-optische connector:	SFP+