Cisco Catalyst 4500E Handleiding

Cisco Niet gecategoriseerd Catalyst 4500E

Lees hieronder de 📖 handleiding in het Nederlandse voor Cisco Catalyst 4500E (30 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/30
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 16
Data Sheet
Catalyst 4500E Supervisor Engine 7-E: Leading
Borderless Network Access and Aggregation
Supervisor Engine Data Sheet
Overview
Establishing borderless leadership is now easier than ever to achieve with the new Cisco
® Catalyst® 4500E
Supervisor Engine 7-E (Figure 1), an enterprise-class Borderless Networks access and aggregation supervisor
engine designed to provide 848 Gbps per system with E-Series chassis. Cisco Catalyst 4500E Supervisor
Engine 7-E is the first Cisco Catalyst supervisor engine to provide 48 Gbps per slot with Flexible NetFlow (FNF)
and Advanced Security combined with reduced total cost of ownership (TCO) and excellent investment protection.
With these capabilities; four 10 Gigabit Ethernet uplinks; and 10/100/1000 Power over Ethernet (PoE), PoE Plus
(PoEP), and Cisco Universal PoE (UPoE) ports, this supervisor engine is undoubtedly Cisco's leading Borderless
Networks access supervisor engine in the Cisco Catalyst Family. Supervisor Engine 7-E is built with price-
performance aggregation deployments in mind, providing increased Gigabit Ethernet and 10 Gigabit Ethernet fiber
density along with hardware capabilities to support enterprise-class aggregation functions. Supervisor Engine 7-E
facilitates user experiences for enterprise, public sector, mid-market, and commercial customer deployment
business-critical applications.
Cisco leadership in Borderless Networks is extended with important features - hardware readiness for Cisco
TrustSec® technology, medianet, Flexible NetFlow, Cisco EnergyWise technology, Cisco Powered Workspace -
and other feature enhancements enabled by the Cisco Catalyst 4500E Supervisor Engine 7-E. Backward and
forward compatibility with most existing Cisco Catalyst 4500 and 4500E line cards helps assure deeper customer
satisfaction with the industry's best investment protection architecture. Cisco Catalyst Supervisor Engine 7-E is
supported in Cisco Catalyst 4500 E-Series chassis only.
The Cisco Catalyst 4500E Supervisor Engine 7-E delivers several new technology breakthroughs and industry
firsts, extending the Cisco Catalyst 4500 Series placement from a premium wiring closet solution into next-
generation borderless access and aggregation deployments.
The Supervisor Engine 7-E oers the following important leading innovations and capabilities:
More than 10 years of investment protection through backward and forward compatibility
Cisco Catalyst switch with 48 Gbps per slot (848 Gbps per system)
Around 5 microseconds of latency to and from any 10 Gigabit Ethernet port
First Cisco Catalyst switch with campus FNF
First Cisco Catalyst switch offering Cisco IOS
® XE Modular Software services
First Cisco Catalyst switch with less than 200 msec In-Service Software Upgrade (ISSU) high availability
First Cisco Catalyst switch for next-generation Cisco Powered Workspace (Energy Efficient Ethernet [EEE]
and UPOE)
First and only modular switch with 8 bidirectional line rate Switched Port Analyzer (SPAN) or Remote SPAN
(RSPAN) sessions
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 16
Figure 1. Cisco Catalyst 4500E Supervisor Engine 7-E
Cisco Catalyst 4500E Supervisor Engine 7-E Feature Highlights
The Cisco Catalyst 4500E Supervisor Engine 7-E is the first Cisco Catalyst supervisor engine to provide
nonblocking 48-Gbps per-slot bandwidth and FNF for optimized application visibility. In addition, the enterprise-
class Cisco Catalyst 4500E Supervisor Engine 7-E offers the following:
Performance and capability
848 Gbps switching capacity with 250 Mpps of throughput
4 nonblocking 10 Gigabit Ethernet uplinks (Small Form-Factor Pluggable Plus [SFP+])
SFP support on uplinks to offer flexibility for up to 4 Gigabit Ethernet ports
384 ports of nonblocking 10/100/1000
PoEP (30W) capabilities on all ports in a line card simultaneously
UPOE (60W) capabilities on all line-card slots
Energy Efficient Ethernet (IEEE 802.3az)
196 ports of nonblocking Gigabit Ethernet SFP
100 ports of 10 Gigabit Ethernet SFP+ (4 uplinks ports + 96 line-card ports)
128,000 FNF entries in hardware
External USB and Secure Digital (SD) card support for flexible storage options
256,000 routing entries for high-end campus access and aggregation deployments
IPv6 support in hardware, providing wire-rate forwarding for IPv6 networks
Dynamic hardware forwarding-table allocations for ease of IPv4-to-IPv6 migration
Scalable routing (IPv4, IPv6, and multicast) tables, Layer 2 tables, and access-control-list (ACL) and
quality-of-service (QoS) entries to use 8 queues/port and comprehensive security policies per port
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 16
Infrastructure services
Cisco IOS XE Software, the modular open application platform for virtualized borderless services
Maximum resiliency with redundant components, Nonstop Forwarding/Stateful Switchover (NSF/SSO),
and ISSU support
Network virtualization through Multi-Virtual Route Forwarding (VRF) and Easy Virtual Networking (EVN)
technology for Layer 3 segmentation
Automation through Embedded Event Manager (EEM), Cisco Smart Call Home, AutoQoS, and Auto
SmartPorts for fast provisioning, diagnosis, and reporting
Cisco Borderless Networks Services
Optimized application performance through deep visibility with FNF supporting rich Layer 2/3/4
information (MAC, VLAN, and TCP Flags) and synthetic traffic monitoring with IP service-level
agreement (IP SLA)
Medianet capabilities to simplify video QoS, monitoring, and security
Energy-efficient design with Cisco EnergyWise technology to manage network, PoEP, and PC
Investment protection and reduced total cost of ownership (TCO)
Full backward compatibility with 6-, 24-, and 48-Gbps slot line cards with no performance degradation
The Cisco Catalyst 4500E Supervisor Engine 7-E is compatible with classic Cisco Catalyst 4500 line cards and
power supplies, providing full investment protection. The Supervisor Engine 7-E is not compatible with classic
Cisco Catalyst 4500 chassis. When you deploy the Cisco Catalyst 4500E Supervisor Engine 7-E with classic line
cards, all of the new features except the 24- and 48-Gbps per-slot switching capacity are inherited.
Predictable Performance and Scalability
The Supervisor Engine 7-E is the first Cisco Catalyst supervisor engine to provide 48-Gbps per-slot switching
capacity. Table 1 highlights the performance and scalability enhancements of the Cisco Catalyst 4500E
Supervisor Engine 7-E.
Table 1. Cisco Catalyst 4500E Supervisor Engine 7-E Performance and Scalability Features
Feature and Description Supervisor Engine 7-E
Centralized switching capacity 848 Gbps
Per-slot switching capacity 48 Gbps
Throughput 250 Mpps for IPv4
125 Mpps for IPv6
250 Mpps for L2 Bridging
IPv4 routing entries 256,000
IPv6 routing entries 128,000
Multicast routes 16,000 (available with Cisco IOS XE 3.1.0 SG)
32,000 (Available with Cisco IOS XE 3.2.0 SG or later)
CPU Dual core; 1.5 GHz
CPU queues 64
Synchronous dynamic RAM (SDRAM) 2 GB upgradable to 4 GB
Nonvolatile RAM (NVRAM) 1 GB
Security and QoS hardware entries 128,000
Cisco Network Admission Control (NAC) and Dynamic Host 12,000


Product specificaties

Merk: Cisco
Categorie: Niet gecategoriseerd
Model: Catalyst 4500E
Ethernet LAN, data-overdrachtsnelheden: 10,100,1000,10000 Mbit/s
Netwerkstandaard: IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3az
Temperatuur bij opslag: -40 - 75 °C
Elektromagnetische compatibiliteit: FCC Part 15 (CFR 47) Class A, ICES-003 Class A, EN55022 Class A, CISPR22 Class A, AS/NZS 3548 Class A, VCCI Class A, ETS 300 386, EN 55022, EN 55024, EN 61000-6-1, EN 50082-1, EN 61000-3-2, EN 61000-3-3
Veiligheid: UL 60950CAN/CSA-C22.2 No. 60950, EN 60950, IEC 60950, TS 001, AS/NZS 3260
Hoogte, in bedrijf: -60 - 3000 m
Compatibiliteit: Cisco Catalyst 4500
Quality of Service (QoS): Ja
Access Control List (ACL): Ja
Switchingcapaciteit: 848 Gbit/s
MAC-adrestabel: 55000 entries
Aantal VLANs: 4094
Bandbreedte: 48 Gbit/s
Aantal moduleslots SPF: 4
Stroomverbruik (typisch): 280 W
Bedrijfstemperatuur (T-T): 0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V): 10 - 90 procent
Code geharmoniseerd systeem (HS): 85176990
Verzending snelheid: 250 Mpps
Queues per poort: 8
Address Resolutie Protocol (ARP) ingang: 47000

Heb je hulp nodig?

Als je hulp nodig hebt met Cisco Catalyst 4500E stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Cisco

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd