Chief XCM1U Handleiding

Chief Flat panel steun XCM1U

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief XCM1U (12 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

I N S T A L L A T I O N I N S T R U C T I O N S

XCM1U

(Shown installed to CPA Series

extension column as example only)

Extra Large Flat Panel Ceiling Mount

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

XCM1U

XCM1U Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively "Milestone"), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

DEFINITIONS

MOUNTING SYSTEM: A MOUNTING SYSTEM is the

primary Chief product to which an accessory and/or component

is attached.

ACCESSORY: AN ACCESSORY is the secondary Chief

product which is attached to a primary Chief product, and may

have a component attached or setting on it.

COMPONENT: A COMPONENT is an audiovisual item

designed to be attached or resting on an accessory or mounting

system such as a video camera, CPU, screen, display,

projector, etc.

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all mounting systems

are properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this mounting system can result in serious personal injury

or damage to equipment! It is the installer’s responsibility to

make sure the structure to which this mounting system is

attached can support five times the combined weight of all

equipment. Reinforce the structure as required before

installing the mounting system.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components located within the mounting system of the

XCM1U model does not exceed 250 lbs (113.4 kg).

WARNING: Use this mounting system only for its intended

use as described in these instructions. Do not use

attachments not recommended by the manufacturer.

WARNING: Never operate this mounting system if it is

damaged. Return the mounting system to a service center for

examination and repair.

WARNING: Do not use this product outdoors.

NOTE: The XCM1U

flat panel ceiling mount is designed to be

mounted to a 1-1/2" NPT or NPSM following ANSI/

ASME B1.20.1 (Schedule 40, 0.154" minimum

thickness steel or aluminum-ASTM B221) threaded

extension column (not included); or a UL Listed CPA

extension column and UL Listed CPA Ceiling Plates

(not included): CPA330, CPA365, CPA395.

The following UL Listed Chief ceiling plates WITHOUT

swaged collars (not included) may also be used:

CMA330, CMA345, CMA395.

--SAVE THESE INSTRUCTIONS--

Installation Instructions XCM1U

DIMENSIONS

31.9

810.7

MAX MOUNTING PATTERN WIDTH

15.75

400.0

MAX MOUNTING

PATTERN HEIGHT

COLUMN SOLD SEPARATELY

ROLL ADJUSTMENT

5.8

147.9

TO C/L OF

COLUMN

TILT LOCKOUTS AT

0°, 10°, AND 20°

5°

20°

MAX TILT

DIMENSIONS: INCHES

[MILLIMETERS]

Product specificaties

Merk:	Chief
Categorie:	Flat panel steun
Model:	XCM1U
Kleur van het product:	Zwart
Breedte:	885 mm
Diepte:	200 mm
Hoogte:	423 mm
Montagewijze:	Plafond
Maximale gewichtscapaciteit:	113 kg
Certificering:	UL
Verstelbaar:	Ja
Montage interface compatibiliteit (min):	200 x 100 mm
Montage interface compatibiliteit (max):	800 x 400 mm
Aantal displays ondersteund:	1
Bereik kantelhoek:	-20 - 5 °
Code geharmoniseerd systeem (HS):	85299097