Chief TPM2020 Handleiding

Chief Flat panel steun TPM2020

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief TPM2020 (8 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

8807-000009 RevD

2009 Milestone AV Technologies,

a Duchossois Group Company

www.chiefmfg.com

04/09

I N S T A L L A T I O N I N S T R U C T I O N S

BEFORE YOU BEGIN

Chief Manufacturing, a products division of

Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

POLE/PITCH- ADJUSTABLE MOUNT

Model: TPM-2000 SERIES

Specifications:

• Weight capacity of 150 lbs. (68 kg).

• Provides tilt range from 5° up to 15° down.

• Accommodates vertical pole (1" - 3" O.D.) or

horizontal pole installation (1" - 2" O.D.).

WARNING: It is the installer’s responsibility to make sure all components are properly assembled and installed

using the instructions provided. Failure to read, thoroughly understand, and follow all instructions can result in

serious personal injury, damage to equipment, or voiding of factory warranty.

Model: TPM-2000 SERIES Installation Instructions

IMPORTANT WARNINGS AND CAUTIONS!

WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: It is the installer’s responsibility to make sure the structure to which this unit is attached can support five

times the combined weight of all equipment. Reinforce the structure as required before installing the unit. Failure to

provide adequate structural strength for this unit can result in serious personal injury or damage to equipment!

WARNING: It is the installer’s responsibility to make sure the combined weight of the display, mount, accessories,

and any other attached equipment must not exceed 150 lbs (68 kg), the maximum support weight of this unit.

Exceeding the maximum support weight can result in serious personal injury or damage to equipment!

WARNING: Make sure the latch securing the display is fully closed at all times except when removing or installing

the display. The latch must be fully closed when installing or removing cables from the display.

WARNING: Watch for pinch points. Do not put your fingers between movable parts.

DIMENSIONS

1.95

8.11

8.95

8.70

16.21

3.45

FACE TILTS

5 UP

15 DOWN

7.01

2.19 .69

.69

.25

.50

4.61

1.31

2.06

APPROXIMATE CENTER OF DISPLAY

NOTE: CUSTOM INTERFACE BRACKET

NOT SHOWN. THE CUSTOM INTERFACE

BRACKET NEEDED FOR YOUR DISPLAY

WILL ADD BETWEEN 1/2" AND 2" IN DEPTH

AND MAY AFFECT LOCATION OF DISPLAY

ON THE MOUNT.

SEE PSB-XXXX DRAWING ALSO.

TOP MOUNTING BUTTON ON

PSB-XXXX DRAWING GOES HERE

Installation Instructions Model: TPM-2000

TOOLS REQUIRED FOR INSTALLATION

• 7/16" Wrench (optional; see Pitch (Tilt)

Adjustment for detail)

• 5/32" Hex Key (provided)

NOTE: Other tools may be required depending on your

method of installation.

PARTS

After unpacking carton, inspect and verify contents (see

Figure 1).

Table 1: Parts

Item Description Qty

10 MOUNT, TPM-2000 1

20 KEY, Hex, 5/32" 1

--- POLE KIT (TPK-1 or TPK-2)

(required, not supplied)

Figure 1: Parts

Product specificaties

Merk:	Chief
Categorie:	Flat panel steun
Model:	TPM2020
Kleur van het product:	Zwart
Gewicht verpakking:	15 g
Montagewijze:	Plafond
Maximale gewichtscapaciteit:	68 kg
Afmetingen (B x D x H):	433 x 86 x 412 mm
Montage interface compatibiliteit (min):	200 x 200 mm
Montage interface compatibiliteit (max):	200 x 200 mm
Aantal displays ondersteund:	1
Maximale schermgrootte:	71 "
Minimale schermgrootte:	42 "