Chief RMF3 Handleiding

Chief Flat panel steun RMF3

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief RMF3 (20 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

I N S T A L L A T I O N I N S T R U C T I O N S

RMF3

RLF3

RMT3

RLT3

FIT MEDIUM/LARGE FLAT PANEL MOUNTS

Spanish Product Description

German Product Description

RMF3/RMT3/RLF3/RLT3

RMF3/RMT3/RLF3/RLT3 Installation Instructions

DISCLAIMER

Legrand AV and its affiliated corporations and subsidiaries

(collectively “Legrand AV”), intend to make this manual |

accurate and complete. However, Legrand AV makes no claim |

that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Legrand AV

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Legrand AV

assumes no responsibility for accuracy, completeness or

sufficiency of the information contained in this document.

Chief® is a registered trademark of Legrand AV Inc.|

DEFINITIONS

MOUNTING SYSTEM: A MOUNTING SYSTEM is the

primary Chief product to which an accessory and/or component

is attached.

ACCESSORY: AN ACCESSORY is the secondary Chief

product which is attached to a primary Chief product, and may

have a component attached or setting on it.

COMPONENT: A COMPONENT is an audiovisual item

designed to be attached or resting on an accessory or mounting

system such as a video camera, CPU, screen, display,

projector, etc.

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all mounting systems

are properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this mounting system can result in serious personal injury

or damage to equipment! It is the installer’s responsibility to

make sure the structure to which this mounting system is

attached can support five times the combined weight of all

equipment. Reinforce the structure as required before

installing the mounting system.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components and accessories attached to RMF3/RMT3

does not exceed 125 lbs (56.7 kg), 200 lbs (90.7 kg) for OR

the RLF3/RLT3.

WARNING: Use this mounting system only for its intended

use as described in these instructions. Do not use

attachments not recommended by the manufacturer.

WARNING: Never operate this mounting system if it is

damaged. Return the mounting system to a service center for

examination and repair.

WARNING: Do not use this mounting system outdoors.

IMPORTANT ! :

The RMF3/RMT3/RLF3/RLT3 mounts are

designed to be mounted to:

• a bare 8" concrete or 8"x8"x16" concrete block wall;

• a steel stud wall with drywall thickness between 1/2"

(min) and 5/8" (max);

• 16" stud spacingRMF3/RMT3:

• 16" or 24" stud spacingRLF3/RLT3:

• a 2" x 4" wood stud wall covered by drywall with

thickness between 1/2" (min) and 5/8" (max);

• 16" stud spacingRMF3/RMT3:

•RLF3/RLT3: 16" or 24" stud spacing

--SAVE THESE INSTRUCTIONS--

Installation Instructions RMF3/RMT3/RLF3/RLT3

DIMENSIONS

DIMENSIONS: INCHES

[MILLIMETERS]

RMF3

.34

181

LEVEL ADJUST

CO RD LEN G TH

.3 4

TYP.

.4 9

TYP.

Product specificaties

Merk:	Chief
Categorie:	Flat panel steun
Model:	RMF3
Kleur van het product:	Zwart
Breedte:	559 mm
Diepte:	25 mm
Hoogte:	487 mm
Gewicht verpakking:	5300 g
In hoogte verstelbaar:	Ja
Montagewijze:	Muur
Maximale gewichtscapaciteit:	56.7 kg
Certificering:	TUV, UL Listed
Montage interface compatibiliteit (min):	- mm
Montage interface compatibiliteit (max):	550 x 450 mm
Aantal displays ondersteund:	1
Maximale schermgrootte:	65 "
Minimale schermgrootte:	32 "
Diepte (max):	25 mm
Type hoogteverstelling:	Handmatig
Aantal per pakket:	1 paar/paren