Chief PSS2536B Handleiding

Chief Flat panel steun PSS2536B

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief PSS2536B (2 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

I N S T A L LA T I O N I N S T R U C T I O N S

Chief Manufacturing, a division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918

8804-000254 RevC

/08

ALL COMPONENTS MUST BE SECURELY FASTENED TO A

STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4

TIMES THE COMBINED WEIGHT OF ALL COMPONENTS

PLUS THE EQUIPMENT BEING MOUNTED. IF IT CANNOT

SUPPORT THIS WEIGHT, THE STRUCTURE MUST BE

REINFORCED.

THE MAXIMUM WEIGHT TO BE INSTALLED ON THE

MOUNT IS 1

POUNDS (

79.38

KG).

PSB-2534 & 2536

DISPLAY MOUNTING BRACKET

Prior to assembly, unpack carton completely and verify contents.

If you are missing any of the following components, please contact Customer Service at 1-800/582-6480

(2) Plasma Side Bracket (2) Plasma Top/Bottom Bracket

(4) Mounting Button - Tapped (8) 10-24 x .5 Button Head Cap Screw

(4) M8 x 35mm Button Head Cap Screw (4) .51 X .32 X .875 Nylon Spacer

(4) M8 x 50mm Button Head Cap Screw (4).68 X .32 X .625

(1) 1/8 Allen Key (1) M5 Allen Key

BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY

DISPLAYS ARE EXTREMELY FRAGILE.

1. Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button, with

chamfered hole of mounting button (larger surface) facing bracket, to top and bottom brackets (four places)

(see Figure 2 & Figure 3).

CAUTION!

Figure 1

WARNING!

Figure 2 Figure 3

2. Using four 10-24 button head cap screws, attach top and bottom to side brackets (see Figure 4 &

Figure 5). The square offset holes can be used if use of the center hole causes the cross brackets to

block connections or if an offset is needed for the installation (See Figure 6 & Figure 7).

3. Place Nylon spacers over mounting holes on back of screen. Attach mounting brackets to display

using M8 screws (see Figures 8 & Figure 9). If needed add both sets of spacers and use the set of

longer bolts to attain required clearance.

4. With the aid of another person, lift your display up to the Chief Mount, aligning buttons of mounting

brackets with slots in the Chief Mount.

5. Lower safety latch on the Chief Mount to secure your display, making sure latch is completely

engaged.

Figure 4 Figure 5

Figure 8 Figure 9

Figure 6 Figure 7

Product specificaties

Merk:	Chief
Categorie:	Flat panel steun
Model:	PSS2536B
Kleur van het product:	Zwart
Breedte:	413 mm
Diepte:	236 mm
Hoogte:	526 mm
Materiaal behuizing:	Metaal
Montagewijze:	Bureau
Maximale gewichtscapaciteit:	68 kg
Maximale schermgrootte:	50 "
Minimale schermgrootte:	32 "
Hoogte verstelbaarheidsbereik:	381 - 813 mm