Chief PL1C Handleiding

Chief Flat panel steun PL1C

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief PL1C (8 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

Chief Manufacturing, a division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918

8803-000065 Rev C

05/08

I N S T A L L A T I O N I N S T R U C T I O N S

Projector

Lock

(PL-1)

The PL-1 projector lock, constructed with heavy gauge

steel, is designed to prevent access to projector mounts.

The projector lock protects against disconnecting

projectors from their mounts in most high-risk

environments, minimizing the probabilities theft.

The design of the PL-1 ensures proper ventilation for

your projector while providing excellent security and

protection.

PL-1

BEFORE YOU BEGIN

• CAUTION: To prevent damage to your display, which could affect or void the Factory warranty,

thoroughly study all instructions and illustrations before you begin to install the mount brackets. Pay

particular attention to the “Important Warnings and Cautions” on Page 2.

• If you have any questions about this installation, contact Chief Manufacturing.

Installation Instructions PL-1

IMPORTANT WARNINGS and CAUTIONS!

WARNING A WARNING alerts you to the possibility of serious injury or death if you do not follow

the instructions.

CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not

follow the corresponding instructions.

• WARNING Improper installation can result in serious personal injury! Make sure that the

mounting surface can support a redundant weight factor five times the total weight of

the equipment. If not, reinforce the mounting surface structural members before

installing the mount.

• WARNING Make sure the mount is correctly oriented.

• CAUTION Check the unit for shipping damage before you begin the installation.

DIMENSIONAL DRAWING

Installation Instructions PL-1

CONTENTS

DIMENSIONAL DRAWING ............................................... 2

TOOLS REQUIRED FOR INSTALLATION ....................... 3

PARTS LIST ...................................................................... 3

INSPECT INSTALLATION LOCATION ............................. 3

INSTALLATION ................................................................. 4

TOOLS REQUIRED FOR

INSTALLATION

• Allen wrench set

NOTE: Other tools may be required depending on your

method of installation.

PARTS LIST

Prior to assembly, unpack the carton completely. Verify

contents listed in Table 1.

Read installation instructions completely. If you are

missing any of the listed parts, contact Customer Service

at: 1-800/582-6480.

Table 1. Parts List

REF DESCRIPTION QTY

10 PL-1 Projector Lock 1

20 Screws 4

30 Spacers 4

PL1A* Key C346A 2

PL1B* Key C346B 2

PL1C* Key C346C 2

*The PL-1 is shipped with two matching keys: PL1A, or

PL1B, or PL1C. To ensure security, the PL-1 is shipped

with one of three different keys.

INSPECT INSTALLATION

LOCATION

Because of the wide variety of possible mounting

situations, Chief Manufacturing only provides general

guidelines for the typical pole-mounted installation.

Study the following information carefully, and make

adjustments as necessary to fit your specific installation.

WARNING

There is a potential for personal injury or equipment

damage if the projector is not adequately mounted.

Be aware of the overall weight of the equipment,

including weight of projector and all attaching

hardware.

Product specificaties

Merk:	Chief
Categorie:	Flat panel steun
Model:	PL1C
Kleur van het product:	Zwart
Breedte:	337 mm
Diepte:	291 mm
Hoogte:	85 mm
Montagewijze:	Plafond
Maximale gewichtscapaciteit:	- kg