Chief PDC2244 Handleiding

Chief Flat panel steun PDC2244

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief PDC2244 (2 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

I N S T A L LA T I O N I N S T R U C T I O N S

CHIEF MANUFACTURING INC. 8804-000302 REV. E

1-800-582-6480 952-894-6280 FAX 952-894-6918 2008 Chief Manufacturing

8401 EAGLE CREEK PKWY, STE. 700 www.chiefmfg.com

SAVAGE, MINNESOTA 55378 USA 2/08

ALL COMPONENTS MUST BE SECURELY FASTENED TO A

STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4

TIMES THE COMBINED WEIGHT OF ALL COMPONENTS

PLUS THE EQUIPMENT BEING MOUNTED. IF IT CANNOT

SUPPORT THIS WEIGHT, THE STRUCTURE MUST BE

REINFORCED.

THE MAXIMUM WEIGHT TO BE INSTALLED ON THE

MOUNT IS 1

POUNDS (

79.38

KG).

PSB-2244

DISPLAY MOUNTING BRACKET

Prior to assembly, unpack carton completely and verify contents.

If you are missing any of the following components, please contact Customer Service at 1-800/582-6480

(2) Plasma Upright Brackets (2) Plasma Top/Bottom Bracket

(4) Mounting Button - Tapped (8) 10-24 x .5 Button Head Cap Screw

(4) M10 x 50mm Hex Head Cap Screw (4) M15 x M10.4 x M20 Nylon Spacer

(4) .750 x .390 x 1.00 Nylon Spacer (1) Wrench, Hex, 17mm

(1) 1/8 Allen Key

BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY

DISPLAYS ARE EXTREMELY FRAGILE.

1. Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button, with

chamfered hole of mounting button (larger surface) facing bracket, to upright brackets (four places) (see

Figure 2 & Figure 3).

CAUTION!

Figure 1

WARNING!

Figure 2 Figure 3

2. Using four 10-24 button head cap screws, attach uprights to top/bottom brackets (see Figure 4 &

Figure 5).

3. Place Nylon spacers over mounting holes on back of screen. Attach mounting brackets to display

using M10 screws (see Figures 6 & Figure 7). Use the nylon spacer that works best for your screen.

4. With the aid of another person, lift your display up to the Chief Mount, aligning buttons of mounting

brackets with slots in the Chief Mount.

5. Lower safety latch on the Chief Mount to secure your display, making sure latch is completely

engaged.

Figure 4 Figure 5

Figure 6 Figure 7

Product specificaties

Merk:	Chief
Categorie:	Flat panel steun
Model:	PDC2244
Kleur van het product:	Zwart
Breedte:	413 mm
Diepte:	300 mm
Hoogte:	434 mm
Montagewijze:	Plafond
Geschikt voor schermmaten:	42 - 71 "
Maximale gewichtscapaciteit:	90.7 kg
Compatibele producten:	Vlakke paneel
Montage interface compatibiliteit (min):	200 x 200 mm
Montage interface compatibiliteit (max):	200 x 200 mm
Bereik kantelhoek:	-25 - 5 °
Maximale schermgrootte:	71 "
Minimale schermgrootte:	42 "