Chief KWD320S Handleiding

Chief Flat panel steun KWD320S

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief KWD320S (16 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

Chief Manufacturing, a products division of

Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8832-000065 Rev. P

Duchossois Group Company

www.chiefmfg.com

08/11

I N S T A L L A T I O N I N S T R U C T I O N S

BEFORE YOU BEGIN

Small Flat Panel Mounts

Model: K-Series

This Instruction Manual covers most of the K-Series wall,

desk, and pole mounts for single, dual, and triple

displays. In addition, this Instruction Manual also covers

selected K-Series accessories.

NOTE: Some K-Series mounts, such as Extreme Tilt,

Grommet, and Table, as well as most K-Series

accessories, have separate Instruction Manuals.

See Specifications for a complete list of models

covered by this Instruction Manual.

NOTE: If an accessory such as an optional laptop tray is

being installed, complete all required installation

procedures within this document prior to installing

the accessory.

K-Series Mounts (Examples)

WARNING: It is the installer’s responsibility to make sure all components are properly assembled and installed

using the instructions provided. Failure to read, thoroughly understand, and follow all instructions can result in

serious personal injury, damage to equipment, or voiding of factory warranty.

• If you have any questions about this these instructions or your specific installation, contact Chief Manufacturing.

DISCLAIMER:

Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and

complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for

every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change

without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained

herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Model: K-Series Installation Instructions

IMPORTANT WARNINGS AND CAUTIONS!

WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to provide adequate structural strength for this component can result in serious personal injury

or damage to equipment! It is the installer’s responsibility to make sure the structure to which this component is

attached can support five times the combined weight of all equipment. Reinforce the structure as required before

installing the component.

WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of all components does not exceed the maximum support

weight as stated in the Specifications section.

WARNING: Allowing any part of your body or component cables to be caught between movable parts can result in

serious personal injury or damage to equipment!

CAUTION: Overtightening fasteners may result in improper operation, excessive wear or damage to equipment,

and/or voiding of factory warranty!

CONTENTS

TOOLS REQUIRED FOR INSTALLATION ...............................................................................................................2

SPECIFICATIONS.....................................................................................................................................................3

MOUNT INSTALLATION ...........................................................................................................................................4

DISPLAY INSTALLATION .........................................................................................................................................7

ARRAY ASSEMBLY (DUAL / TRIPLE DISPLAY; ALL EXCEPT KCY-210/-220).......................................................9

MULTI-DUAL ARM ASSEMBLY (KCY-210/-220 ONLY)..........................................................................................10

CABLE MANAGEMENT.......................................................................................................................................... 11

ADJUSTMENT ........................................................................................................................................................12

TOOLS REQUIRED FOR INSTALLATION

• Phillips Screwdriver, #1 and #2

• 9/16" Wrench (KSA-1015/-1016 Only)

• Drill (All Wall Mounts)

• 1/8" Drill Bit (All Wall Mounts except KSA-1015/-1016)

• 1/4" Drill Bit (KSA-1015/-1016 Only)

• 2.5mm Hex Key (approximately 3/32"; provided with Desk Mounts)

• 5/32" Hex Key (provided with applicable K-Series mounts)

• 3/16" Hex Key (provided with all K-Series mounts)

NOTE: Other tools may be required depending on your method of installation.

Installation Instructions Model: K-Series

SPECIFICATIONS

Table 1: Mounts

MODEL NO. OF

DISPLAYS

SUPPORTING

STRUCTURE

NO. OF

MOUNTING

ARMS

ADJUSTABLE

HEIGHT

MAX.

EXTENSION

(INCHES)

MIN.

CLOSED

DEPTH

(INCHES)

MAX.

SUPPORT

WEIGHT

(LBS.)

PER MONITOR

KWP-110 Single Wall None 40No None 2.9

KWV-110 Single Wall Single Yes 13 252.2

KWS-110 Single Wall Single No 9.5 2.2 40

KWG-110 19.5 25Single Wall Dual Yes 2.2

KWD-110 16 40Single Wall Dual No 2.2

KWB-110 Single Wall Triple Yes 26 252.2

KCV-110 Single Desk Single Yes 13.5 252.2

KCS-110 Single Desk Single No 10 402.2

KCG-110 Single Desk Dual Yes 20 252.2

KCD-110 Single Desk Dual No 16.5 402.2

KCB-110 Single Desk Triple Yes 26.5 252.2

KPP-110 Single Pole None 40No None 2.2

KPS-110 Single Pole Single No 9.5 2.2 40

KPD-110 Single Pole Dual No 16 402.2

KPG-110 Single Pole Single Yes 16.5 252.2

KPV-110 Single Pole Single Yes 13.3 252.2

KWD-130 Single Wall Single Yes 18.6 255.1

KWS-220 Dual Wall Single No 13.5 176.4

KWD-220 20 17Dual DualWall No 6.4

KCS-220 Dual Desk Single No 14 406.4

KCD-220 Dual DualDesk No 20.5 176.4

KCY-210 Dual Desk Multi-Dual Yes (one arm) 20 202.2

KCY-220 Dual Desk Multi-Dual Yes (two arms) 20 202.2

KWD-230 Dual Wall Single No 18.6 405.9

KWS-320 Triple SingleWall No 13.5 106.4

KWD-320 Triple Wall Dual No 20 106.4

KCS-320 Triple Desk Single No 14 106.4

KCD-320 Triple Desk Dual No 20.5 106.4

KGL-110 Tray Desk Single Yes 29.5 1814

KGL-220 Single/Tray Desk Dual Yes 29.5 14 40 total

Table 2: Accessories

MODEL NO. OF

MONITORS

SUPPORTING

STRUCTURE

NO. OF

MOUNTING

ARMS

ADJUSTABLE

HEIGHT

MAX.

EXTENSION

(INCHES)

MIN.

CLOSED

DEPTH

(INCHES)

MAX.

SUPPORT

WEIGHT

(LBS.)

PER MONITOR

KMA-220 Dual N/A N/AN/A N/A N/A 17

KMA-320 Triple N/A N/AN/A N/A N/A 10

KMA-325 Triple N/A N/AN/A N/A N/A 10

KSA-1015 N/A Wall Single No 16 6.4 75

KSA-1016 N/A 6.4Wall Dual No 24.5 75 total

Product specificaties

Merk:	Chief
Categorie:	Flat panel steun
Model:	KWD320S
Kleur van het product:	Zilver
Breedte:	1057 mm
Diepte:	201 mm
Hoogte:	368 mm
Montagewijze:	Muur
Geschikt voor schermmaten:	10 - 18 "
Maximale gewichtscapaciteit:	4.5 kg
Montage interface compatibiliteit (min):	75 x 75 mm
Montage interface compatibiliteit (max):	100 x 100 mm
Maximale schermgrootte:	18 "
Minimale schermgrootte:	10 "