Chief KSA1014S Handleiding

Chief Flat panel steun KSA1014S

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief KSA1014S (6 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

I N S T A L L A T I O N I N S T R U C T I O N S

CHIEF MANUFACTURING INC.

1-800-582-6480 952-894-6280 FAX 952-894-6918

8401 EAGLE CREEK PARKWAY, STE 700

SAVAGE, MINNESOTA 55378 USA

8804-000294

2006 Chief Manufacturing

www.chiefmfg.com

06/06

BEFORE YOU BEGIN

Centris Head Accessory

Model: FSA-1014

The FSA-1014 Centris Head Accessory is designed for

use with Chief F-Series Swing Arm mounts.

WARNING: It is the installer’s responsibility to make sure all components are properly assembled and installed

using the instructions provided. Failure to read, thoroughly understand, and follow all instructions can result in

serious personal injury, damage to equipment, or voiding of factory warranty.

• If you have any questions about this these instructions or your specific installation, contact Chief Manufacturing

at 1-800-582-6480 or 952-894-6280.

CSAV, Inc., and its affiliated corporations and subsidiaries (collectively, "CSAV"), intend to make this manual accurate and complete. However,

CSAV makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice

or obligation of any kind. CSAV makes no representation of warranty, expressed or implied, regarding the information contained herein. CSAV

assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Model: FSA-1014 Installation Instructions

IMPORTANT WARNINGS AND CAUTIONS!

WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! Read and

understand the installation instructions provided with the mount this accessory is being installed on, and thoroughly

understand the mounts weight limits.

Installation Instructions Model: FSA-1014

TOOLS REQUIRED FOR INSTALLATION

• Phillips Screwdriver

• 5/32" Hex Wrench

Other tools may be required depending on your method

of installation.

PARTS

After unpacking carton, inspect and verify contents

(See Table 1 and Figure 1). If any listed parts are

missing or damaged, contact Chief Customer Service at

1-800-582-6480.

Table 1: Parts

Item Description Qty

10 Centris Head Assembly 1

20 WASHER, Nylon 1

30 PIN, Pivot 1

40 SCREW, Button Head Cap, 5/16-18 x 4" 1

50* SCREW, Button Head Cap, 5/16-18 x 4 1/2" 1

60 Nut, NYLOCK, 5/15-18 1

70 SPACER 2

80 WASHER, UHMW 1

90 SCREW, Phillips head machine, M4 x 12mm 4

100 SCREW, Phillips head machine, M4 x 20mm 4

110 SCREW, Phillips head machine, M4 x 30mm 4

120 SPACER, Nylon, 1/2 x .194 x 3/8" 4

130 SPACER, Nylon, 1/2 x .194 x 3/4" 4

* Used when installing onan adjustable arm mount.

Figure 1: PARTS

90 100

110 120

130

Product specificaties

Merk:	Chief
Categorie:	Flat panel steun
Model:	KSA1014S
Kleur van het product:	Zilver
Breedte:	116 mm
Diepte:	55 mm
Hoogte:	115 mm
Paneelmontage-interface:	75 x 75, 100 x 100 mm
Horizontaal draaibaar:	-15 - 15 °
Afmetingen (B x D x H):	116 x 55 x 115 mm