Chief KONTOUR K2C200S Handleiding

Chief Flat panel steun KONTOUR K2C200S

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief KONTOUR K2C200S (12 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
I N S T A L L A T I O N I N S T R U C T I O N S
Instrucciones de instalación
Installationsanleitung
Instruções de Instalação
Istruzioni di installazione
Installatie-instructies
Instructions d´installation
K2C100
K2W100
K2C200
K2W200
K2P200
K2P100
Monitor Arm Series
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
K2 Series
K2 Series Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
IMPORTANT SAFETY INSTRUCTIONS!
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component. The wall to which the mount is being attached
may have a maximum drywall thickness of 5/8" (1.6cm).
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located between the K2 Series Monitor Arm
up to (and including) the display does not exceed 40 lbs
(18.14 kg) for single arm mounts or 25 lbs (11.34 kg) per arm
on dual arm mounts. Use with products heavier than the
maximum weight indicated may result in collapse of the
mount and its accessories causing possible injury.
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this product outdoors.
--SAVE THESE INSTRUCTIONS!--
Installation Instructions K2 Series
3
DIMENSIONS
K2C100
3.94
100
2.95
75
11.41
MAX 21.04 [534.2]
289.7
5.19
131.7
3.00
76.2
CABLE
MANAGEMENT
90 INTERFACE
ROTATION
7.41
(8.85 [224.7] FOR
LOWER PROFILE INSTALL )
188.1
.50
MAX 3.25 [82.6]
12.7
DESKTOP
THICKNESS RANGE
9.63
244.5
MANUAL HEIGHT
ADJUSTMENT RANGE
MAX 19.2 [487.7]
EXTENSION
PITCH
TENSION
KNOB
PITCH
RANGE
15
HEIGHT
ADJUSTMENT
KNOB
LOWER PROFILE INSTALL
LOWER
PROFILE
3.94
100
2.95
75
11.47
MAX 21.04 [534.2]
291.3
5.25
133.3
3.00
76.2
CABLE
MANAGEMENT
90 INTERFACE
ROTATION
.50
MAX 3.25 [82.6]
12.7
DESKTOP
THICKNESS RANGE
9.56
242.9
MANUAL HEIGHT
ADJUSTMENT RANGE
MAX 17.4 [450.7]
EXTENSION
MIN 2.98 [75.7]
PITCH
TENSION
KNOB
PITCH
RANGE
15
HEIGHT
ADJUSTMENT
KNOB
MAXIMUM WIDTH OF 2 PARALLEL, FORWARD-FACING DISPLAYS: 28.8" [731.5]
K2C200


Product specificaties

Merk: Chief
Categorie: Flat panel steun
Model: KONTOUR K2C200S
Kleur van het product: Zilver
Breedte: 376 mm
Diepte: 76 mm
Hoogte: 432 mm
Montagewijze: Bureau
Maximale gewichtscapaciteit: 11.3 kg
Maximale schermgrootte: 30 "
Minimale schermgrootte: 10 "

Heb je hulp nodig?

Als je hulp nodig hebt met Chief KONTOUR K2C200S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Flat panel steun Chief

Chief

Chief TS218SU Handleiding

9 December 2024
Chief

Chief K1D120BXDL Handleiding

17 November 2024
Chief

Chief RPMA204 Handleiding

17 November 2024
Chief

Chief LCB1U Handleiding

17 November 2024
Chief

Chief RPA640 Handleiding

17 November 2024
Chief

Chief FSBI2TB Handleiding

17 November 2024
Chief

Chief XCB1U Handleiding

17 November 2024
Chief

Chief RSA213 Handleiding

17 November 2024
Chief

Chief RSMBU Handleiding

17 November 2024

Handleiding Flat panel steun

Nieuwste handleidingen voor Flat panel steun