Chief K3F310S Handleiding

Chief Flat panel steun K3F310S

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief K3F310S (16 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

I N S T A L L A T I O N I N S T R U C T I O N S

K3F120

K3F220

K3G310

K3G120 K3G220

K3F310

K3G320

Kontour™ Array Arm Series

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

K3 Series

K3 Series Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively “Milestone”), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this component can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this component is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

component.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components located on the K3 Series mount up to (and

including) the display does not exceed 15 lbs (6.8 kg) per

display for the K3F220, K3G220, K3F310, K3G310 and

K3G320 mounts or 25 lbs (11.34 kg) per display for the

K3F120 and K3G120 mounts.

WARNING: Use this mounting system only for its intended

use as described in these instructions. Do not use

attachments not recommended by the manufacturer.

WARNING: The K3F120, K3F220 and K3F310 mounting

systems are intended for table top mounting ONLY!

WARNING: Never operate this mounting system if it is

damaged. Return the mounting system to a service center for

examination and repair.

WARNING: Do not use this product outdoors.

--SAVE THESE INSTRUCTIONS--

Installation Instructions K3 Series

DIMENSIONS

464.7

18.29

921.9

MAX. MONITOR

CENTER HEIGHT

36.29

FROM SURFACE

TILT ADJUSTMENT

+/-10 DEGREES

VESA

100 X 100

75 X 75

COMPATIBLE

576.0

22.68

2.43

COLUMN WIDTH

61.6

0.31

7.9

BASE

THICKNESS

3.19

2.27

57.7

COLUMN

DEPTH

30.6

1.21

81.0

393.6

15.50

39.06

992.2

K3F120

DIMENSIONS: INCHES

[MILLIMETERS]

35.98

913.8

MAX. MONITOR CENTER

HEIGHT FROM SURFACE

14.66

372.4

MAX DISTANCE

BETWEEN MONITORS