Chief FSB4101S Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor Chief FSB4101S (4 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE 700
SAVAGE, MINNESOTA 55378 USA
PART NO. 8804-000034 (Rev. E)
Ā©2005 Chief Manufacturing
www.chiefmfg.com
Printed in USA 09/05
Model FSB-4101
INTERFACE BRACKET
VESA 200mm x 100mm / 100mm x 100mm
BEFORE YOU BEGIN
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, or you have any questions about this installation, contact Chief
Manufacturing Customer Service at 1-800/582-6480
Model FSB-4101 Installation Instructions
2
WARNING: FLAT PANEL DISPLAYS ARE
EXTREMELY FRAGILE. If Display Uses a Screw Size
Other Than M4, DO NOT USE M4 Screws provided.
Monitor Damage Could Occur.
ITEM DESCRIPTION QTY.
10 Interface Bracket 1
20 3/8" Nylon Spacers 6
30 3/4" Nylon Spacers 6
40 1/8" Nylon Spacers 6
50 M4 X 12mm Phillips Pan Head Screws 6
60 M4 X 20mm Phillips Pan Head Screws 6
70 M4 X 30mm Phillips Pan Head Screws 6
80 M4 X 6mm Phillips Pan Head Screws 6
Figure 1:
80 30 70 20 60 40 50 10
Installation Instructions Model FSB-4101
3
NOTE: If the flat panel display has a table stand
attached, remove existing stand.
Flush Mount Installation
1. Secure the Interface Bracket to the Display using 1/8"
Nylon Spacers and M4 x 12mm screws
(see Figure 2).
NOTE: Length of mounting screws is dependant
upon length of spacer used.
Figure 2:
Recessed Mount Installation
1. Place four Nylon spacers (3/8" or 3/4" as necessary)
over four mounting holes in Display (see Figure 3).
2. Secure the Interface Bracket to the Display using M4
x 20mm or M4 x 30mm screws depending upon
spacer used. (see Figure 3).
Figure 3:
Mount to Q2 System
1. Install flat panel display, with interface plate attached,
on Q2 mount (see Figure 4).
2. Move latching flag of Q2 mount to secure display.
Figure 4:
Conversion to VESA 75mm Mounting/CentrisĀ®
Mounts
1. Remove Phillips head screws and mounting buttons
from the interface bracket.
Figure 5:
2. Using M4 x 6mm screws, attach the interface bracket
to any VESA 75mm x 75mm mounting device.
Display
Interface
Bracket
1/8" Nylon Spacers (6)
M4 x 12mm Screws(6)
Display
Interface
Bracket
3/8" or 3/4" Nylon Spacers(6)
M4 x 20mm Screws(6)
M4 x 30mm Screws(6)
Display
Interface
Bracket
Q2 Mount
Latching Flag
Display
Interface
Bracket
Mounting Button
Phillips Head
Screw (4)
VESA Mount


Product specificaties

Merk: Chief
Categorie: Flat panel steun
Model: FSB4101S

Heb je hulp nodig?

Als je hulp nodig hebt met Chief FSB4101S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Flat panel steun Chief

Chief

Chief TS218SU Handleiding

9 December 2024
Chief

Chief K1D120BXDL Handleiding

17 November 2024
Chief

Chief RPMA204 Handleiding

17 November 2024
Chief

Chief LCB1U Handleiding

17 November 2024
Chief

Chief RPA640 Handleiding

17 November 2024
Chief

Chief FSBI2TB Handleiding

17 November 2024
Chief

Chief XCB1U Handleiding

17 November 2024
Chief

Chief RSA213 Handleiding

17 November 2024
Chief

Chief RSMBU Handleiding

17 November 2024

Handleiding Flat panel steun

Nieuwste handleidingen voor Flat panel steun