Chief FDP4100B Handleiding

Chief Flat panel steun FDP4100B

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief FDP4100B (2 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

8803-000033 01/26/04

CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com

INSTALLATION INSTRUCTIONS

FDP SERIES

SMALL FLAT PANEL DISPLAY

DUAL SCREEN POLE MOUNT

Exclusive Q2™ Mounting System

Prior to assembly, unpack carton completely and verify contents.

If you are missing any of the following components, please contact Customer Service at 1-800/582-6480.

(2) FDP Pole-Mounting Bracket Half (2) ¼” Flat Washer

(2) ¼-20 X 4.25” Hex Bolt (8) 10-24 X 1.00 Thread Forming Screw

(8) ½” X ½” Nylon Spacer

BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY

The FSP will fit on any 1/1/2” to 2” O.D. pipe including 1 ½”NPT.

Flat Panel Displays are Extremely Fragile.

If Monitor Uses a Screw Size Other Than M4 X 10mm (M4 X 20mm),

DO NOT USE M4 Screws Provided. Monitor Damage Could Occur.

Interface Bracket Installation:

1. See installation procedures accompanying your mounting bracket.

Optional Latching Flag Placement:

1. Remove Phillips head screw, Nylock nut and latching flag (see Figure 2).

2. Reposition latching flag and secure using Phillips head screw, Nylock nut.

Figure 1

Figure 2

CAUTION!

Remove screw

and nu

ove

atc

8803-000033 01/26/04

CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com

Pole-Mounting Bracket Assembly and Installation:

1. Assemble two pole-mounting bracket halves as shown in Figure 3 and secure using two ¼-20 X 4.25”

hex bolts and two ¼” flat washers.

2. For vertical pole mounting, install the pole-mounting bracket on 1 ½” to 2” OD pipe/pole and secure

using 7/16” hex drives (see Figure 4).

3. For horizontal pole mounting; remove eight tilt adjustment screws, reposition the tilt bracket as

shown in Figure 5, and insert nylon spacers. Secure using 10-24 x 1.00 screws provided.

Mounting Display with Interface Bracket to Pole-Mounting Bracket:

1. Make sure both latching flags on pole-mounting bracket are in the unlocked position (see Figure 4).

2. Place your small flat panel displays; with interface brackets attached, onto the pole-mounting bracket,

making sure they are securely seated.

3. Engage pole-mounting bracket latching flags, locking small flat panel displays in place (see Figure 6).

4. Adjust tilt by loosening (slightly) tilt adjustment screws (see Figure 7) on each side of pole-mounting

bracket, adjust to desired angle, and tighten tilt adjustment screws.

Figure 3 Figure 4

Locked

Unlocked

Tighten to

secure to

ole

Tilt

Adjustment

Screws

Figure 6

10-24 x 1.00 screw

.500 O.D. x .500

long nylon spacer

Figure 7

¼-20 X 4.25” hex bolt

and ¼” washer

Figure 5

Product specificaties

Merk:	Chief
Categorie:	Flat panel steun
Model:	FDP4100B
Kleur van het product:	Zwart
Breedte:	143 mm
Diepte:	95 mm
Hoogte:	175 mm
Materiaal behuizing:	Metaal
Montagewijze:	Muur
Geschikt voor schermmaten:	10 - 26 "
Maximale gewichtscapaciteit:	20.5 kg
Horizontaal draaibaar:	360 °
Scharnier:	Ja
Montage interface compatibiliteit (min):	75 x 75 mm
Montage interface compatibiliteit (max):	100 x 100 mm
Bereik kantelhoek:	-25 - 10 °