Chauvet COLORdash Par-Quad 7 Handleiding

Chauvet Lamp COLORdash Par-Quad 7

Lees hieronder de 📖 handleiding in het Nederlandse voor Chauvet COLORdash Par-Quad 7 (24 pagina's) in de categorie Lamp. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
Quick Reference Guide
English EN
Españ ol ES
Fran FRçais
Nederlands NL
COLORdashâ„¢ Par-Quad 7 QRG EN
2
About this
Guide
The COLORdashâ„¢ Par- 7 Quad Quick Reference Guide (QRG) has basic
product information such as connection, mounting, menu options, and
DMX values. Download the User Manual from
www.chauvetprofessional.com for more details.
Disclaimer
The information and specifications contained in this QRG are subject to
change without notice.
Safety Notes
• DO NOT open this product. It contains no user- serviceable parts.
• DO NOT look at the light source when the product is on.
• To eliminate unnecessary wear and improve its lifespan, during
periods of non-use completely disconnect the product from power via
breaker or by unplugging it.
• CAUTION: When transferring product from extreme temperature
environments, (e.g. cold truck to warm humid ballroom) condensation
may form on the internal electronics of the product. To avoid causing a
failure, allow product to fully acclimate to the surrounding
environment before connecting it to power.
• CAUTION: This product’s housing hot when lights amay be re
operating.
• Mount this product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
• DO NOT leave any flammable material within 50 cm of this product
while operating or connected to power.
• USE a safety cable when mounting this product overhead.
• DO NOT operate this product outdoors or in any location where dust,
excessive heat, water, or humidity may affect it.
• DO NOT operate this product if the housing, lenses, or cables appear
damaged.
• DO NOT connect this product to a dimmer or rheostat.
• ONLY connect this product to a grounded and protected circuit.
• ONLY use the hanging/mounting bracket to carry this product.
• In the event of a serious operating problem, stop using immediately.
• The maximum ambient temperature is 104 ° °F (40 C). Do not operate
this product at higher temperatures.
Contact
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact
your distributor to request support or return a product. Visit
www.chauvetprofessional.com for contact information.
What Is
Included
• COLORdash™ Par-Quad 7
• Neutrik® powerCON® power cord
• Gel frame holder
(7.5 in/191 mm accessories)
• Warranty Card
• Quick Reference Guide
AC Power
This product has an ranging power supply that can work with an input auto-
voltage range of 100– 240 VAC, 50/60 Hz.
To eliminate unnecessary wear and improve its lifespan, during periods
of non-
use completely disconnect the product from power via breaker
or by unplugging it.
COLORdashâ„¢ Par- Quad 7 QRG EN
3
Power Linking
You can link up to 21 -COLORdashâ„¢ Par Quad 7 products at 120 VAC or
39
at 230 VAC. Never exceed this number. Power linking cords can be
purchased separately.
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Fuse
Replacement
1. Disconnect this product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the
housing.
3. Remove blown fuse and replace with a good fuse of the same type and
rating.
4. Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The COLORdashâ„¢ Par Quad- 7 will work with a DMX controller using a
regular DMX serial connection. A DMX Primer is available from
www.chauvetprofessional.com.
DMX Connection
The COLORdashâ„¢ Par Quad- 7 uses a regular DMX data connection for its
DMX personalities: 4 Ch, 6 Ch, and 10 Ch
. See the User Manual to
connect and configure for DMX operation.
Master/Slave
Connection
The COLORdashâ„¢ Par- 7 Quad uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
Mounting
Before mounting this product, read the Safety Notes. Make sure the
mounting clamp is capable of supporting the weight of the product. For our
Chauvet line of mounting clamps, go to trusst.com/productcategory/base-
plates accessories- -clamps/.
Product
Mounting
Diagram
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value into the selected function
<UP>
Navigates upwards through the menu list or increases the
numeric value when in a function
<DOWN>
Navigates downwards through the menu list or decreases
the numeric value when in a function
Secure the safety cable using
the passageway on the back
of the product.
Overhead Mounting
Floor Mounting


Product specificaties

Merk: Chauvet
Categorie: Lamp
Model: COLORdash Par-Quad 7

Heb je hulp nodig?

Als je hulp nodig hebt met Chauvet COLORdash Par-Quad 7 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Lamp Chauvet

Handleiding Lamp

Nieuwste handleidingen voor Lamp

Makita

Makita MT001 Handleiding

16 December 2024
Ledlenser

Ledlenser ML6 Handleiding

16 December 2024
Ledlenser

Ledlenser ML4 Handleiding

16 December 2024
Ledlenser

Ledlenser H3.2 Handleiding

16 December 2024
Ledlenser

Ledlenser MH5 Handleiding

16 December 2024
Ledlenser

Ledlenser MH4 Handleiding

16 December 2024
Ledlenser

Ledlenser H4R Handleiding

16 December 2024